A bicycle wheel can be thought of a uniform hoop with a radius of 41 cm and mass2.0 kg. Consider the case where the wheel start from rest and accelerates uniformlyunder the action of a constantly applied torque of 0.5 N-m exerted by a force at theedge of the wheel. The torque is caused by the bicycle chain acting at a radius of11.5 cm from the center of the wheel.(a) How long does the wheel take to reach a speed of 10 rev/min?(b) Through how many revolutions does it turn while accelerating?

Solution: Given Values, Torque(τ)=0.5 N-m Mass(M)=2 kg Radius(R)=41 cm=0.41 m

Answered: A bicycle wheel can be thought of a…

Similar questions

A grinding wheel is in the form of a uniform solid disk of radius 6.93 cm and mass 2.06 kg. It starts from rest and accelerates uniformly under the action of the constant torque of 0.608 Nm that the motor exerts on the wheel. (a) How long does the wheel take to reach its final operating speed of 1 260 rev/min? s (b) Through how many revolutions does it turn while accelerating? rev
A net torque of 36.0 Nm is applied to a potters wheel rotating about a fixed axis. The applied force acts for 6.00 s. During this time, the angular speed of the wheel increases from 0 to 10.0 rad/s. The motor is then turned off and a torque due to friction brings the wheel to rest 60.0 s later. Find: a) the moment of inertia of the wheel b) the magnitude of the torque due to friction c) the total number of revolutions of the wheel during the entire interval.
A grinding wheel is in the form of a uniform solid disk of radius 6.98 cm and mass 2.09 kg. It starts from rest and accelerates uniformly under the action of the constant torque of 0.591 N-m that the motor exerts on the wheel. (a) How long does the wheel take to reach its final operating speed of 1 130 rev/min? S (b) Through how many revolutions does it turn while accelerating? rev Need Help? Read It Submit Answer
Instead of a Tug-of-War competition, two teams are having a "Torque-of-War". Team A is pulling on their rope with a force of 255N at a radius of 0.90m, and Team B is pulling with a force of 180N at a radius of 1.25m. (a) Which team is winning, and what is the net torque on the cylinder? Team A winning (b) The rotational inertia of the cylinder is 34kg*m^(2).
A solid, uniform cylinder with mass 9.00 kg and diameter 0.25 m is spinning at 22 rad/s on a thin, frictionless axle that passes along the cylinder axis. You bring the cylinder to rest by placing your hand on the rim. 1) What is the friction force between your hand and the cylinder if the cylinder comes to rest in 6.0 s? Express your answer in newtons.
he wheels of a wagon can be approximated as the combination of a thin outer hoop, of radius ?h=0.421 mrh=0.421 m and mass 5.27 kg5.27 kg, and two thin crossed rods of mass 7.37 kg7.37 kg each. A farmer would like to replace his wheels with uniform disks ?d=0.0588 mtd=0.0588 m thick, made out of a material with a density of 6450 kg6450 kg per cubic meter. If the new wheel is to have the same moment of inertia about its center as the old wheel about its center, what should the radius of the disk be?
A combination of an applied force and a frictional force produce a constant total torque of 32 N-m on a wheel rotating about a fixed axis. This combined force acts for 10 s, during which the wheel’s angular speed increases from 0 to 8 rad/s. Find the moment of inertia of the wheel.
A constant torque of -10 N m is applied to a bicycle wheel of mass 2 kg and radius 0.5 m. If the wheel is initially rotating at 200 rad/s, find the time it will take to stop the wheel. (Remember to correctly identify the moment of intertia for this particular shape. This will aid you in finding the angular acceleration.)
A solid cylinder haas a mass of 1.5 kg and a radius of 0.264 m. The cylinder is placed on an inclined surface and released from rest. The cylinder accelerates down the incline at a rate of 2.09 m/s^2, What is the manitude of the net torque that acts on it?
A 3.0-m rod is pivoted about its left end. A force of 6.0 N is applied perpendicular to the rod at a distance of 1.2 m from the pivot causing a ccw torque, and a force of 5.2 N is applied at the end of the rod 3.0 m from the pivot. The 5.2 N is at an angle of 25 degrees to the rod and causes a cw torque. What is the net torque about the pivot? Choose – 6.3 Nm –1.7 Nm 0.6 Nm – 0.6 Nm
An automobile engine can produce 200 N · m of torque. Calculate the angular acceleration produced if 95.0% of this torque is applied to the drive shaft, axle, and rear wheels of a car, given the following information. The car is suspended so that the wheels can turn freely. Each wheel acts like a 15.0 kg disk that has a 0.180 m radius. The walls of each tire act like a 2.00-kg annular ring that has inside radius of 0.180 m and outside radius of 0.320 m. The tread of each tire acts like a 10.0-kg hoop of radius 0.330 m. The 14.0-kg axle acts like a rod that has a 2.00-cm radius. The 30.0-kg drive shaft acts like a rod that has a 3.20-cm radius.
The figure shows a jet engine suspended beneath the wing of an airplane. The weight of the engine is 10100 N and acts ash shown in the figure. In flight the engine produces a thrust of 64500 N that is parallel to the ground. The rotational axis in the figure is perpendicular to the plane of the paper. With respect tot he axis, find the magnitude of the torque due to (a) the weight and (b) the thrust.

SEE MORE QUESTIONS