A beam PQRS is 18 m long and is simply supported at points Q and R 10m apart. Overhangs PQ and RS are 3 m and 5m respectively. A train of two point loads of 150 kN and 100 KN, 5m apart, crosses this beam from left to right with 100 kN load leading. The maximum sagging moment under the 150 kN load anywhere is

A beam PQRS is 18 m long and is simply supported at points Q and R 10m apart. Overhangs PQ and RS are 3 m and 5m respectively. A train of two point loads of 150 kN and 100 KN, 5m apart, crosses this beam from left to right with 100 kN load leading. The maximum sagging moment under the 150 kN load anywhere is

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

PLEASE ANSWER THIS QUESTION ASAP! I WILL SURELY UPVOTE!!!
10 - Calculate the value of the bending moment generated at support A of the given structure? D A 120 kN 4.0 m 4.0 m 4.0 m 4.0 m a) 600 kN.m b) 960 kN.m c) 565 kN.m d) 1440 kN.m е) 480 kN.m 3.0 m
Three moving loads of P1, P2 and P3 have fixed distances apart. Distance between P1 and P2 is d1 while distance between P2 and P3 is d2. . These loads passes thru a 20 m length beam. This beam is supported at point B (roller) and point C (hinged) with distances of 10 m and 20 meters from leftmost end of the beam (point A). Point D is located midway of points B and C. Given data: P1 = 40 kN, P2 = 60 kN, P3 = 80 kN, d1 = 2 m and d2 = 2 m. Which of the following most nearly gives the maximum negative moment at D in kN-m caused by the moving loads.
A 9-m simply supported beam is to carry a uniformly distributed load of 15 KN/m all throughout its length. 34. Determine the maximum shear occurring on the beam. a. 72.5 kN c. 77.5 kN b. 62.5 kN d. 67.5 kN 35. The distance of the point of zero shear from the left support is most likely equal to: a. 5.0 m c. 4.5 m b. 5.125 m d. 3.675 m 36. Maximum moment of the beam is most likely equal to: a. 162.4 kN.m b. 140.5. kN.m c. 151.9 kN.m d. 145.6 kN.m 37. Determine the shear at a point 2 m from left support: a. 42.5 kN c. 52.5 kN b. 37.5 kN d. 36.5 kN
A propped cantilever beam (a beam fixed at one end and simple supported at the other end) is subject to a uniform load of 10 kN/m and a concentrated load of 40 kN at midspan. Determine the reaction at the simple support if the span is 10 m. A 60 kn B) 50 kn. C 80 kn D 70 kn
If the overhanging beam is made of wood having the allowable tensile and compressive stresses of 4 MPa and 5 MPa, determine the maximum concentrated force P that can applied at the free end. 2m O2.89 KN 3.52 KN O 1.22 KN O2.60 KN B 150 mm- 125 mm 200 mm 25 mm 25 mm
A simply supported rectangular concrete beam of span 8 m has to be prestressed with a force of 1600 kN. The tendon is of parabolic profile having zero eccentricity at the supports. The beam has to carry an external uniformly distributed load of intensity 30 kN/m. Neglecting the self-weight of the beam, the maximum dip (in meters upto two decimal place) of the tendon at the mid-span to balance the external load should be...
Determine the internal normal force, shear force, and bending moment acting at point C in the beam.
A simply supported beam 8 m long has an overhang of 1.7 m at the left support. If a highway uniform load of 11.67 kN/m and a concentrated load of 127 kN, passes thru the beam, compute the maximum positive moment (kN-m) at mid span.
3.11 (B). A beam, 12 m long, is to be simply supported at 2m from each end and to carry a u.d.i. of 30 kN/m together with a 30 kN point load at the right-hand end. For ease of transportation the beam is to be jointed in two places, one joint being situated 5 m from the left-hand end. What load (to the nearest kN) must be applied to the left- hand end to ensure that there is no B.M. at the joint (i.e. the joint is to be a point of contraflexure)? What will then be the bes position on the beam for the other joint? Determine the position and magnitude of the maximum B.M. [114 kN, 1.6 m from r.h. reaction; 4.7 m from 1h. reaction; 43.35 kN m.) present on the beam.
of 60 kN moving concentrated loads 4 m apart. Determine the maximum possible bending moment at the centerline of the beam and the absolute maximum bending moment in the 5.12: A simply supported beam of 16 m span supports a pail beam.
A cover-plate beam is made up of a W21x147 section with 300 mm x 12 mm plates attached to the top and bottom flanges and is fastened by two rows of 20 mm rivets. The beam is simply supported over a span of 6m and carries a uniformly distributed load of 270 kN/m including its own weight. The shear capacity of each rivet is 30 kN. Properties of W21x147 Overall depth, d = 560 mm Moment of Inertia, I = 0.00151 mm flange d. web W21x147 FIGURE 18 68. Determine the distance from the centroid of the cover plate to the neutral axis of the built-up section.