A barge is pulled by two tugboats. The barge is aligned horizontally while the rope of tugboat 1 is inclined with the horizontal 0-degrees upward, and rope of tugboat 2 is inclined with the horizontal 'a'-degrees downward. If the resultant of the forces exerted by the tugboats is a 4,997-lb force directed along the axis of the barge and 0=42 degrees, determine the magnitude of the tension (Ib) in rope 1 if a = 62° Answer in 2-decimal places only if applicable, and don't include units. C

A barge is pulled by two tugboats. The barge is aligned horizontally while the rope of tugboat 1 is inclined with the horizontal 0-degrees upward, and rope of tugboat 2 is inclined with the horizontal 'a'-degrees downward. If the resultant of the forces exerted by the tugboats is a 4,997-lb force directed along the axis of the barge and 0=42 degrees, determine the magnitude of the tension (Ib) in rope 1 if a = 62° Answer in 2-decimal places only if applicable, and don't include units. C

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

9 ft 13 ft 22. Inad nianram Mj at point B is 10 kips-ft, P=12 kips is 9 ft from point A; and WI = 1.5 kips/ft is distributed along the length of the beam which is 22 ft. If the 1.5kips/ft uniformly distributed load will be transformed into a singular concentrated load, what will be the magnitude of Moment taken at point A? What is the equivalent singular Resultant force of the loads shown? Determine the location of the resultant R from point A.
From the given figure below. compute the following: 1. Draw the shear diagram2. Draw the moment diagram
Problem Sets: 2) A truck and trailer combination having the axle loads as shown in the figure rolls across the simply supported beam with a span of 13 meters. Determine the maximum shear force and bending moment and draw the shear and bending moment diagrams where the maximum moment occurs. P1=20 KN P2=60 KN P3=40 KN 3m 6m whian 13m
MOVING LOADS
9. A hook is subjected to three forces A, B, and Cas shown. Force A = 35 kN and force B = 45 kN. a) If the resultant of the forces is 80 kN and is acting along the positive x-axis, determine the angle a. b) If a = 60 degrees, what is the value of force C such that the resultant of forces A, B, and C acts along the x-axis? c) For the forces A, B, and C to be in equilibrium, what is the magnitude of the resulting force C? B
A supporting rope is loaded with a line load q(x) = q0 between points A and B. The rope shall be stretched such that the slope of the rope at point A is zero. If l = 10 m and h = 2.3 m, determine the (a) horizontal tensile force and (b) the maximum force in the rope. q0 (kN/m) = 20.627
A garbage truck weighs 152 kN 20 m bridge girder, as shown in Figure 3. The total weight of the truck will be disuributed 38% in the passes through a front wheel while the remaining weights will be distributed at the rear wheel. If the wheels are 4 m apart from each other, determine the maximum moment applied in the bridge girder and only consider two locations of loads: one for front and the other one for rear, from the total weight of the garbage truck. Figure 3 A garbagTe truck nasses through the bridge girder
3 DECIMAL PLACES THE ANSWERS THANKS IN ADVANCE