A 595-g squirrel with a surface area of 885 cm2 falls from a 6.0-m tree to the ground. Estimate its terminal velocity. (Use the drag coefficient for ahorizontal skydiver. Assume that the squirrel can be approximated as a rectanglar prism with cross-sectional area of width 11.2 cm and length 22.4hits the ground. Give the squirrel's terminal velocity, not it's velocity as it hits thecm. Note, the squirrel may not reach terminal velocity by the timeground.)m/sWhat will be the velocity of a 59.5-kg person hitting the ground, assuming no drag contribution in such a short distance?m/sAdditional MaterialsM Reading

We know that the formula of the terminal velocity is given as vt= 2mgρCA ---------- eq1 Where m is…

A 595-g squirrel with a surface area of 885 cm² falls from a 6.0-m tree to the ground. Estimate its terminal velocity. (Use the drag coefficient fom horizontal skydiver. Assume that the squirrel can be approximated as a rectanglar prism with cross-sectional area of width 11.2 cm and length cm. Note, the squirrel may not reach terminal velocity by the time it hits the ground. Give the squirrel's terminal velocity, not it's velocity as it hits

A 595-g squirrel with a surface area of 885 cm² falls from a 6.0-m tree to the ground. Estimate its terminal velocity. (Use the drag coefficient fom horizontal skydiver. Assume that the squirrel can be approximated as a rectanglar prism with cross-sectional area of width 11.2 cm and length cm. Note, the squirrel may not reach terminal velocity by the time it hits the ground. Give the squirrel's terminal velocity, not it's velocity as it hits

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

solve
Two structural members A and B are bolted to a bracket as shown. Knowing that both members are in compression and that the force is P = 35 kN in member A and Q=10 kN in member B, determine by trigonometry the magnitude and direction of the resultant of the forces applied to the bracket by members A and B. 40° A -20° The magnitude of the resultant of the forces applied to the bracket by members A and B is The direction of the resultant of the forces applied to the bracket by members A and B is KN.
static rigid bodies
F5
Problem A block of mass m is placed on a rough surface inclined relative to the horizontal. The incline angle is increased until the block start to move. Show that you can obtain the coefficient of static friction ug by measuring the critical angle 0 where slipping occurs. mg pino to .... my 18.
A mass m = 0.851 kg cart standing over a horizontal air track is attached to a string as it is shown in the figure. The string passes over a pulley of mass M=1.45 kg and radrus R= 40.4 cm (I=1/2 MR-) and is pulled with a constant force F, as shown in the figure. If the air passing through the track is turned off, wwhat is the magnitude of the constant force F that will accelerate the cart to an acceleration a 3.64 m/s-? The static and kinetic friction between the cart and the air-track are u, = 0.75 and 0.4 respectively (q715) aant a) 09.07 N b) 05.74 N c) O3.44 N d) O8.1 N
Please, explain it step-by-step process.
Pls do fast and i will rate instantly for sure Solution must be in typed form
A sled of mass 500kg sits at rest on a rough slope that is inclined at 10* to the horizontal. The coefficient of friction between the slope and the sled is 0.3. The sled is held in place by a wire attached to a winch. The tension in the wire is TN. a) Find the maximum possible value of T. A load of mass mkg is added to the sled, and tension in the wire is increased to 5000N in order to pull the sled and load up the slop. Given that the sled and load are pulled a distance of 100m in 80seconds, b) Work out the value of m
take the x-axis along the incline (say, downhill) and the y-axis perpendicular to the incline, say upwards and solve the problem again. Then write down Newton's 2nd law in the x- and y-direction again, and find the connection between FN and FG
Figure shows the two cables AO and BO tied together at O and the loadings are also shown. A В 30° 30° (a) Derive the expressions relating the tension in each cable as a function of a. 150N 200N (b) Write a MATLAB program to plot the tension in each cable for 0° < a < 90°. (c) Determine the value of a for which both cables OA and OB are in tension.
B. A ɑx =? A pick up truck is carrying a 40-kg, 6 meter long ladder at a 35-degree angle as shown. The ladder is wedged against the tailgate at A and makes contact with the roof of the truck at B. The distance from A to B is 2 meters.