A 30, 10 kVA, 400 V, 4-pole, 50 Hz star connected synchronous machine has synchronous reactance of 16 2 and negligible resistance. The machine is operating as a motor on 400 V bus-bars (assumed infinite). The field excitation is adjusted so that the power factor is unity when the machine draws 6 kW. Determine the excitation emf and torque angle. Draw the phasor diagram.

A 30, 10 kVA, 400 V, 4-pole, 50 Hz star connected synchronous machine has synchronous reactance of 16 2 and negligible resistance. The machine is operating as a motor on 400 V bus-bars (assumed infinite). The field excitation is adjusted so that the power factor is unity when the machine draws 6 kW. Determine the excitation emf and torque angle. Draw the phasor diagram.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 6 pole, wave wound DC shunt generator has a useful total flux of 420 mWb. The armature winding consists of 220 turns each of 0.004 2 resistance, when running at 900 RPM the armature current is 50 A. If the armature winding reconnected as lap calculate the terminal voltage in case of wave and lap given that the field circuit and the speed are kept same.
The relation between armature torque and armature current of a DC motor is Parabolic Linear Inverse Exponential
3. A 4 pole, 250 dc shunt motor has a lap connected armature with 960 conductors. The flux per pole is 2 x 102Wb. Calculate the torque developed by the armature and the useful torque in N-m when the current taken by the motor is 30A. The armature resistance is 0.12 ohm and the field resistance is 125ohm. The rotational losses amount to 825W
An eight-pole, 24 KW, 180 V, DC machine has a duplex LAP-wound armature which has 72 coils with 10 turns per coil. Its rated speed is 2400 RPM. Assume a dead zone of 4 coils that are always beyond poles faces. Find the constant K, and the flux per pole to produce 180 V at no-load conditions. Answers The constant K is : The flux per pole is: mWb/pole.
A six-pole, 30-slot dc commutator generator has a lap wound Armature winding. The armature constant, Ka is 9.55.The generator is operated with a separately excited field such that the field flux per pole is 0.04 weber/pole. The generator is driven at a speed of 3000 rpm. The no load armature voltage is 418.9 V. The above generator is now operated as a motor. The flux is 0.04 weber/pole. It is desired to supply a load requiring a Torque of 50 n–m at 4000 rpm. Armature circuit resistance is 0.075 ohm. Calculate (a) the back emf, (b) the required armature current and voltage to supply this load.
1. A machine delivers power to the load at 220 V while being driven at 1,050 rpm. At this load, the armature circuit dissipates 650 W. The armature of a 6-pole separately excited dc generator is lap wound with 534 conductors. If the flux per pole of this generator is 30- mWb, determine the kW rating of the load served. Assume a total brush contact drop of 1.5 V.
A 1000rpm DC shunt generator is supplying 100 lamps of 60W at 230V, the armature and field resistance are respectively 0.10 and 1150.Calculate the Load current. O a. 26.09 A O b. 16.09 A OC. 36.09 A O d. 46.09 A
This course EHide blom Clear my choice An eight-pole, 24 KW, 124 V, DC machine has a duplex LAP-wound armature which has 72 coils with 6 turns per coil. Its rated speed is 3000 RPM. Assume no dead zone Find the constant K and the flux per pole to produce 80 Volts at no-load conditions Select one: a. None Ob. K = 68.86 and flux = 3.33 mWb/pole Oc.K = 68.755 and flux = 3.7 mWb / pole O d. K = 95.5 and flux = 3.7 mWb / pole A peries DC motor has a series-field windino of 25 turns per pole. Its armature resistance in 0,1 2. and its
4. A shunt generator has a full load current of 196 A at 220 V. The stray losses are 900W and the shunt field coil resistance is 75N. If it has a full load efficiency of 90%, find the armature resistance.
Reducing the supply voltage so that Vnew = Vold / V3 reduces the maximum torque of the motor so that Tmaxnew= ...Tmaxold . * .... ...
at of estion An eight-pole, 24 KW, 124 V, DC machine has a duplex LAP-wound armature which has 72 coils with 6 turns per coil. Its rated speed is 3000 RPM. Assume no dead zone Find the constant K and the flux per pole to produce 80 Volts at no-load conditions Select one: O a None O b. K= 68.86 and flux = 3.33 mWb/pole Oc. K= 68.755 and flux = 3.7 mWb/pole O d. K= 95.5 and flux = 3.7 mWb/pole
A 4 pole lap wound DC shunt generator has 300 armature conductors and a flux per pole of 0.01 Wb. If runs at 1000 rpm. The armature and shunt field resistances are 0.2 ohm and 125 ohms respectively. Calculate the terminal voltage when it is loaded to take a load current of 90 A.