A 19.0 kg bucket of water is suspended by a very light rope wrappedaround a solid uniform cylinder 0.300 m in diameter with mass 11.0 kg. Thecylinder pivots on a frictionless axle through its center. The bucket isreleased from rest at the top of a well and falls 11.0 m to the water.a)What is the tension in the rope while the bucket is falling?b)With what speed does the bucket strike the water?c)What is the time of fall?d) While the bucket is falling, what is the force exerted on the cylinder bythe axle?

Net force in the vertical direction on the bucket of water

Answered: A 19.0 kg bucket of water is suspended…

Similar questions

A double-decker London bus (Figure 1) might be in danger of rolling over in a highway accident, but at the low speeds of its urban environment, it's plenty stable. The track width is 2.05 m. With no passengers, the height of the center of gravity is 1.45 m, rising to 1.73 m when the bus is loaded to capacity. What is the critical angle for the unloaded bus? What is the critical angle for the loaded bus?
A bowler throws a bowling ball of radius R = 11 cm along a lane. The ball slides on the land with an intial speed vcom = 8.5 m/s and initial anbular speed ω0=0. The coefficient of kinetic friction between the ball and lane μk= 0.27. Use g = 9.8 N/kg. a) How far does the ball slide? b) Determine center of mass velocity when the sliding stops.
A uniform thin rod of mass m = 3.2 kg and length L = 1.5 m can rotate about an axle through its center. Four forces are acting on it as shown in the figure. Their magnitudes are F1 = 6.5 N, F2 = 2.5 N, F3 = 15 N and F4 = 15 N. F2 acts a distance d = 0.14 m from the center of mass. a. Calculate the magnitude τ1 of the torque due to force F1, in newton meters. b. Calculate the magnitude τ2 of the torque due to force F2 in newton meters. c. Calculate the magnitude τ3 of the torque due to force F3 in newton meters. d. Calculate the magnitude τ4 of the torque due to force F4 in newton meters. e. Calculate the angular acceleration α of the thin rod about its center of mass in radians per square second. Let the counter-clockwise direction be positive.
You are holding a meterstick of 0.23 kg horizontally in one hand. Assume that your hand is wrapped around the last 12 cm of the stick (see figure), so the front edge of your hand exerts an upward force, and the rear edge of your hand exerts a downward force. (a) What is the upward force? N (b) What is the downward force? N
Hi please help!: A horizontal 14 kg balance beam is 4.8 m in length and has its center of mass at the geometrical center. The beam is supported from both ends. A m=4.0 kg mass is placed d=1.8 m from the left end of the beam Find the normal force N2 (in Newton's) exerted on the beam by the support on the right end. Answer using three significant figures
In order to get his car out of the mud, a man ties one end of a rope to the front bumper and the other end to a tree 7.4 m away, as shown below. He then pulls on the center of the rope with a force of 490 N, which causes its center to be displaced 0.98 m, as shown. What is the force (in N) of the rope on the car? (Enter the magnitude.) 490 N 0.98 m 7.4 m
can you please solve (c) ?
The three masses shown in Figure 1) are connected by massless, rigid rods. Figure B A y P 200 g 10 cm 10 cm 100 g C 8 cm 1 of 1 What is the z-coordinate of the center of mass? Express your answer with the appropriate units. View Available Hint(s) Icm= Value Submit Part B h 4 What is the y-coordinate of the center of mass? Express your answer with the appropriate units View Available Hint(s) 1 Units A ?
Please help!
A solid uniform 45-kg ball of diameter 32.0 cm is supported against a vertical, frictionless wall with a string of length 30.0 cm as shown below. Find the tension in the string.
a bucket of water with a mass of 25 kilograms is lifted from a well by a rope which is wound around a cylinder with a radius of 0.10 meters. A 0.50 meter crank is attached to the cylinder so that it wraps the rope around the cylinder. what is the minimum force that must be applied to the crank to lift the water bucket ?
A bucket of water with a mass of 2.36 kg is attached to a rope that is wound around a cylinder. The cylinder has a mass of 3.00 kg and is mounted horizontally on frictionless bearings. The bucket is released from rest. A) Find the speed of the bucket after it has fallen through a distance of 0.800 m. in m/s B) What is the tension in the rope? in N C) What is the acceleration of the bucket? Enter a positive value if the acceleration of the bucket is upward and enter a negative value if the acceleration of the bucket is downward. in m/s^2

SEE MORE QUESTIONS