A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with incompressible oil with a density of 800 kg/m3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the force that must be applied to the smaller piston in order to lift the car after it has been raised 1.20 m? (For purposes of this problem, you can neglect the weight of the pistons.

A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with incompressible oil with a density of 800 kg/m3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the force that must be applied to the smaller piston in order to lift the car after it has been raised 1.20 m? (For purposes of this problem, you can neglect the weight of the pistons.

Related questions

Q: A spring is attached to the bottom of an empty swimming pool, with the axis of the spring oriented…

Q: A cylinder with base area 8 cm 42 cm 1 dm? lies on its side on a horizontal surface and is divided…

Q: A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage…

A: Given: Mass of water,M=6.85×105kgDensity of water,ρ=1000kg/m3Acceleration due to gravity,g=9.8m/s2…

Q: A car of mass 1290 kg rests on a hydraulic lift with a piston of radius 0.24 m that is connected to…

A: The mass of the car is 1290 kg.The radius of the first piston is 0.24 m.The radius of the second…

Q: You are designing a hydraulic lift for an automobile garage. It will consist of two oil-filled…

A: from the Pascal's Principle, pressure at worker end=pressure at car end…

Q: st species of clingfish (family Gobiesocidae), pelvic and pectoral fins converge to form a suction…

Q: garden hose of inner radius 1.00 cm carries water at 2.26 m/s. The nozzle at the end has inner…

Q: A veterinarian uses a hypodermic syringe like the one shown in the figure to inject a horse with a…

Q: To verify her suspicion that a rock specimen is hollow, a geologist weighs the specimen in air and…

Q: A veterinarian uses a hypodermic syringe like the one shown in the figure to inject a horse with a…

A: Given: Cross-sectional area, A=3.33×10-5 m2 Applied force, F=2.55 N Atmospheric pressure, P=1 atm

Q: 10) Which vectors in graph below are equal? to too

A: Solution: Equal Vectors: If two vectors A and B are said to be equal if they have same…

Q: The drawing shows a cylinder fitted with a piston that has a mass m₁ of 0.850 kg and a radius of…

A: The acceleration of the system is can be found out by using second law off motion as follows: s = ut…

Q: A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage…

A: Given Data: The mass of water is, m=3.08×105 kg By using the density formula, the volume of water…

Q: Figure (a) below shows a U-shaped tube containing an amount of mercury. The left arm of the tube has…

Q: 1.67 kg of glass (p = 2.03 x 10° kg/m°) is shaped into a hollow spherical shell that just barely…

A: Given: The mass of the hollow spherical shell: m s=1.67 kgThe density of glass: ρglass=2.03×103…

Q: A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage…

Q: Figure (a) below shows a U-shaped tube containing an amount of mercury. The left arm of the tube has…

A: Given : A1=11 cm2=11x10-4 m2 A2=4.90 cm2=4.90x10-4 m2 Mass of water poured=m=0.3 kg Density of…

Q: A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage…

A: The gauge pressure at house B is PB = 1.6964*105 Pa

Q: A person who weighs 758 N is riding a 76-N mountain bike. Suppose the entire weight of the rider…

A: given that,weight of person= 758 Nweight of mountain bike=76 Ngauge pressure in each tire = 5.50 ×…

Q: In the process of changing a flat tire, a motorist uses a hydraulic jack. She begins by applying a…

A: We have a force of F1=5 N applied on the input piston which has area A1 and a force F2=340 N applied…

Q: = Water is stored in a pressurised container at a height HT 9 m. It then moves through a horizontal…

Q: A U-shaped tube, open to the air on both ends, contains mercury. Water is poured into the left arm…

A: Solution:-Given thatwater column (hw)=17.8 cm=0.178 m

Q: The cross-sectional area of the smaller piston of a hydraulic press is 129 cm? while the area of the…

A: area of cross section of small piston = A1= 129 cm2 area of cross section of larger piston = A2=…

Q: A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage…

Q: A mass m₁ = 70 kg is balanced by a mass m2 = 1200 kg on an oil hydraulic lift. The diameter of the…

A: This is a question from the Hydraulic lift system. We will elaborate more about the problem in the…

Q: To verify her suspicion that a rock specimen is hollow, a geologist weighs the specimen in air and…

Q: A simple U-tube contains mercury. When 11.2 cm of water is poured into the right arm, how high does…

A: Given, Water poured at right arm h1 = 11.2 cm = 11.2 x 10-2 m

Q: A veterinarian uses a hypodermic syringe like the one shown in the figure to inject a horse with a…

Q: tower is a familiar sight in many towns. The purpose of such a tower is to provide storage capacity…

Q: 10) Water circulates throughout an apartment complex in a hot water heating system. (a) If the water…

Q: A nozzle with an area of 0.3 cm2 is attached to a garden hose with an area of 1.5 cm2. The flow rate…

A: area of nozzle = An= 0.3 cm2 area of hose = Ah= 1.5 cm2 volume flow rate = Q = 0.12 L/s

Q: The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose the device is…

A: Given data: The density of gasoline is ρ=7.00×102 kg/m3. The inlet radius is r1=2.04 cm=0.0204 m.…

Question

100%

A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with incompressible oil with a density of 800 kg/m³ and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the force that must be applied to the smaller piston in order to lift the car after it has been raised 1.20 m? (For purposes of this problem, you can neglect the weight of the pistons.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps

SEE SOLUTION Check out a sample Q&A here

Follow-up Questions

Read through expert solutions to related follow-up questions below.

Follow-up Question

How did you arrive at this answer?

Pressure due to car = FA2 = 120000.1018= 117878.19 Pa

Solution

by Bartleby Expert

SEE SOLUTION

Similar questions

A 70.0 kg person balances a 1200 kg elephant which is standing on a 1200 kg 70 kg circular lift of diameter 2.00 m. What is the diameter of the piston the person is standing on? 20m Oil
A barber’s chair with a person in it weighs 2150 N. The output plunger of a hydraulic system begins to lift the chair when the barber’s foot applies a force of 70 N to the input piston. Neglect any height difference between the plunger and the piston. What is the ratio of the radius of the plunger to the radius of the piston?
A garden hose of inner radius 1.00 cm carries water at 1.41 m/s. The nozzle at the end has inner radius 0.200 cm. How fast does the water move through the nozzle?
To verify her suspicion that a rock specimen is hollow, a geologist weighs the specimen in air and in water. She finds that the specimen weighs twice as much in air as it does in water. The density of the solid part of the specimen is 2.02 × 103 kg/m3. What fraction of the specimen’s apparent volume is solid?
On another planet that you are exploring, a large tank is open to the atmosphere and contains ethanol. A horizontal pipe of cross-sectional area 7.0×10−4m27.0×10−4m2 has one end inserted into the tank just above the bottom of the tank. The other end of the pipe is open to the atmosphere. The viscosity of the ethanol can be neglected. You measure the volume flow rate of the ethanol from the tank as a function of the depth hh of the ethanol in the tank. If you graph the volume flow rate squared as a function of hh, your data lie close to a straight line that has slope 2.09×10−5m5/s22.09×10−5m5/s2. What is the value of gg, the acceleration of a free-falling object at the surface of the planet? Express your answer with the appropriate units.
A large man sits on a four-legged chair with his feet off the floor. The combined mass of the man and chair is 95.0 kg. If the chair legs are circular and have a radius of 0.500 cm at the bottom, what pressure does each leg exert on the floor? Pa Need Help? Read It
A Volkswagen with mass m = 8.00 x 102kg is at rest as shown in the figure. Both pistons have a circular cross-sectional area. The small piston has a diameter of d1 = 0.25 m and the large piston has a diameter d2 = 4.5 m. Determine the magnitude of the forceexercised on the small piston.
A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage capacity and to provide sufficient pressure in the pipes that deliver the water to customers. The drawing shows a spherical reservoir that contains 5.23 x 105 kg of water when full. The reservoir is vented to the atmosphere at the top. For a full reservoir, find the gauge pressure that the water has at the faucet in (a) house A and (b) house B. Ignore the diameter of the delivery pipes. Vent B 15.0 m Faucet 7.30 m Faucet- (a) Number i Units (b) Number i Units >
A yoyo of radius R and mass M is released from rest with the string vertical and its top end fixed up a support as shown below. How fast is the center of mass of the yoyo moving when it has fallen a distance of 47 cm. Ignore the mass of the string and express your answer if m/s
A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage capacity and to provide sufficient pressure in the pipes that deliver the water to customers. The drawing shows a spherical reservoir that contains 3.95 x 105 kg of water when full. The reservoir is vented to the atmosphere at the top. For a full reservoir, find the gauge pressure that the water has at the faucet in (a) house A and (b) house B. Ignore the diameter of the delivery pipes. B GO Faucet 7.30 m Vent- 15.0 m Faucet
A moonshiner produces ethanol and stores it in a stainless tank in the form of a cylinder, 20 cm in diameter with a tight-fitting piston at the top. The total volumetric capacity of the tank is 0.20 m3 (200L). In an attempt to squeeze a little more into the tank. he piles lead bricks on the piston, the total mass of the bricks and piston is 120 kg. What additional volume of ethanol can he squeeze into the tank? Kethanol=11 x 10-10 Pa-1.
A water tower is a familiar sight in many towns. The purpose of such a tower is to provide storage capacity and to provide sufficient pressure in the pipes that deliver the water to customers. The drawing shows a spherical reservoir that contains 7.16 x 105 kg of water when full. The reservoir is vented to the atmosphere at the top. For a full reservoir, find the gauge pressure that the water has at the faucet in (a) house A and (b) house B. Ignore the diameter of the delivery pipes.