7.1 In IEEE 802.11, open system authentication simply consists of two communications. An authentication is requested by the client, which contains the station ID (typically the MAC address). This is followed by an authentication response from the AP/router containing a success or failure message. An example of when a failure may occur is if the client's MAC address is explicitly excluded in the AP/router configuration. a. What are the benefits of this authentication scheme? b. What are the security vulnerabilities of this authentication scheme?

7.1 In IEEE 802.11, open system authentication simply consists of two communications. An authentication is requested by the client, which contains the station ID (typically the MAC address). This is followed by an authentication response from the AP/router containing a success or failure message. An example of when a failure may occur is if the client's MAC address is explicitly excluded in the AP/router configuration. a. What are the benefits of this authentication scheme? b. What are the security vulnerabilities of this authentication scheme?

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

Most IP datagram reassembly algorithms have a timer to avoid having a lost fragment tie up reassembly buffers forever. Suppose that a datagram is fragmented into four fragments. The first three fragments arrive, but the last one is delayed. Eventually, the timer goes off and the three fragments in the receiver's memory are discarded. A little later, the last fragment stumbles in. What should be done with it?
- Consider another carelessly written Web application, which uses a servlet that checks if there was an active session, but does not check if the user is authorized to access that page, instead depending on the fact that a link to the page is shown only to authorized users. What is the risk with this scheme? (There was a real instance where applicants to a college admissions site could, after logging into the Web site, exploit this loophole and view information they were not authorized to see; the unauthorized access was however detected, and those who accessed the information were punished by being denied admission.)
In this problem we investigate whether either UDP or TCP provides a degree of end-point authentication. a. Consider a server that receives a request within a UDP packet and responds to that request within a UDP packet (for example, as done by a DNS server). If a client with IP address X spoofs its address with address Y, where will the server send its response? b. Suppose a server receives a SYN with IP source address Y, and after responding with a SYNACK, receives an ACK with IP source address Y with the correct acknowledgment number. Assuming the server chooses a random initial sequence number and there is no "man-in-the-middle," can the server be certain that the client is indeed at Y (and not at some other address X that is spoofing Y)?
Three-way handshake is used by a TCP client and a TCP server to establish a connection, as illustrated below: 1st: client:port1 -> server:port2, SYN 2nd: server:port2 -> client:port1, SYNACK 3rd: client:port1 -> server:port2, ACK When this client is performing scanning attacks, it will generated a large number of failed connections. In each failed connection, the three-way handshake fails to complete. People commonly use SYN together with the absence of its corresponding SYNACK in this same TCP session to identify whether this connection is failed. By investigating the failed connections, an engineer finds that in legitimate/benign cases, if the server does not return SYNACK to the client, the client will not send the ACK packet after SYNACK (e.g., the 3rd packet above). Therefore, this engineer suggests that we can count the failed connections based on the following rules without considering SYNACK:
The following questions are related to HTTP protocol Q1. The first line of a HTTP request from some client to some server is basically made of where the web page file path is added. The path is shown as folders separated by slash. Q2. If an HTTP server responds to a client request and the response is a success, what is the http code and string that marks a success response? Must provide the code and the string as they appear in TCPDump or Wireshark traces. (note: use upper case for the string and also proper spacing in you answers. Keep the order of the string and the code as seen in TCPDump) Answer: code and string that marks a success response Q3. What http header field is used to identify an address of a web page (i.e. the URI) that linked to the resource currently being requested. This field indicates the last page the user/requester was on by the time they link to the requested page. Answer: The field that indicates the last page the user/requester was on is Q4. What is the http…
please please answer asap
- Consider another carelessly written Web application, which uses a servlet that checks if there was an active session, but does not check if the user is authorized to access that page, instead depending on the fact that a link to the page is shown only to authorized users. What is the risk with this scheme? (There was a real instance where applicants to a college admissions site could, after logging into the Web site, exploit this loophole and view information they were not authorized to see; the unauthorized access was however detected, and those who accessed the information were punished by being denied admission.)
Draw a sequence diagram for the following scenario. In a network, two nodes communicate with each other. These are the sequence. 1) Node J sends ping message to Node L 2) Node L sends ICMP echo reply to node L. Now Node A is having the MAC address of Node L. 3) Node J starts TCP handshake with Node L by sending SYN message. 4) Node L sends (SYN+ACK) back to node J. 5) Node J sends the ACK to Node L.
Let's say that Host C is running a Web server that listens on port 80. Suppose that this web server is able to maintain persistent connections and responds to requests from both Host A and Host B. Is Host C sending all of the requests over the same connection, or are there many sockets in use? Do each of them have port 80 even though they are broadcast over separate sockets? It's something you need to discuss and provide some clarification on.
Can someone please help me with this? I'll give a thumb up to thank for your time.As I'm reviewing for my upcoming exam, I really need an answer from an expert in the field. Please do not send me an answer from chatGPT. I've got enough of that, so please be helpful.
Https is a protocol used to secure websites from being tampered with by other parties without proper authorization. it bridges the gap between sender and receiver.Using protocols like secure socket layer/TLS, HTTPS encrypts data sent over the internet, making it unreadable to anybody who shouldn't have it.This prevents a "man in the middle" assault on the system.Such assaults intercept messages before they reach their intended recipient.It then transmits the revised information to the user.It guarantees the server's authenticity, too.
A local area network (LAN) makes use of something called a hub. Is there a route out of the collision zone that we don't have to go into? In the event that this is the case, could you kindly elaborate? In the event that this is not possible, what alternative types of technology are available, and how do they function?