5. The armature of a 12 pole DC shunt generator has 50 slots and is wave wound with 12 conductors per slots. The generator is running at a speed of 625 rpm and supplies a resistive load of 15 ohms at a terminal voltage of 300V. The armature resistance is 0.5 ohms and field resistance is 60 ohms. Find the armature current, the generated EMF and the flux per pole.

5. The armature of a 12 pole DC shunt generator has 50 slots and is wave wound with 12 conductors per slots. The generator is running at a speed of 625 rpm and supplies a resistive load of 15 ohms at a terminal voltage of 300V. The armature resistance is 0.5 ohms and field resistance is 60 ohms. Find the armature current, the generated EMF and the flux per pole.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 6 pole wave wound d.c. shunt generator has 500 conductors. A generator delivers 50 kW of power at 250 voltage at full load. The resistance of the field circuit is 125 2. Actual brush shift is 10°. Then find the demagnetizing and cross magnetizing ampere turns per pole and how many additional turns must be wound on each pole to eliminate the demagnetizing effect.
A four-pole Series connected generator has a lap connected armature with 728 conductors. If the generator supplies one hundred incandescence lamp (100V, 60 W). The series field and armature resistance are 0.2 ohms and 0.015 ohms respectively. Find the generated voltage.
Question No.4 A dc generator has an armature emf of 100 V when useful flux/pole is 20 mWb, and a speed of 800 rpm. The generated emf at a speed of 1000 rpm and same flux is
An 8- pole dc generator has 500 armature conducters and a useful flux of 0.05 Wb. A. What will be the emf generated, if it is lap- connected and runs at 1200 rpm? B. What must be the speed at which it is to be driven to produce the same emf if it is wave wound.
An 6-pole d.c. generator has 515 armature conductors, and a useful flux of 10 mWb per pole. What will be the e.m.f. generated if it is lap-connected and runs at 970 rpm? What must be the speed at which it is to be driven produce the same e.m.f. if it is wave-wound? Eg Speed
A 4 pole armature of a DC machine has 175 conductors and a flux per pole of 0.1 wb. Find the EMF generated when running at 600 rpm, when the armature is Lap wound.
the armature of a 12 pole wave wound dc shunt generator has 50 slots with 12 conductors per slot. the generatoris running at a speed of 625 rpm and supplies a resistive load of 15 ohm at a terminal voltage 350v. the armature and the field reisitance are0.5 ohm and 70 ohm respectively. find the armature current,generated emf and flux per pole
A six-pole dc machine has an armature connected as a lap winding. The armature has 32 slots with six conductors per slot. The armature is rotated at 600 rpm, and the flux per pole is 30 mWb. Calculate the induced voltage. 1
A 6 pole generator with wave wound armature has 58 slots each having 20 conductors. The flux per pole is 0.01 Wb. () At what speed must the armature rotate to give an induced EMF of 230V is, GD What will be the voltage developed, if the winding is lap connected and the armature rotates at the same speed is,
For a 4-pole dc armature with 28 slots and 8 coil-sides per slot, find the winding pitches and the commutator pitch for a wave winding. What is the distance between brushes in terms of commutator segments?