43. Given: A 250 V DC shunt motor whose armature resistance is 0.6 2 and field resistance is 150 Q. At no-load but full main field flux, the motor speed is 1000 RPM and the no-load armature current is 5.0 A. When the motor is to develop a torque of 100 N.m, The value of the rotational losses is: 730 W 911 W 560 W 1235 W

43. Given: A 250 V DC shunt motor whose armature resistance is 0.6 2 and field resistance is 150 Q. At no-load but full main field flux, the motor speed is 1000 RPM and the no-load armature current is 5.0 A. When the motor is to develop a torque of 100 N.m, The value of the rotational losses is: 730 W 911 W 560 W 1235 W

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A dc motor has a back emf of 110 V and an armature current of 90 A when running at 1500 rpm. Find the torque developedwithin the armature.
Electrical machines
answer 4 5 6
A shunt dc motor has armature voltage = 150 V, armature field resistance = 100 Q, and armature resistance = 1.6 Q. At a certain torque the motor rotates at 1350 R.P.M and takes a current = 12 A. what will be the load %3D %3D %3D torque?
Help please and explanation if possible...TIA A 48 V, DC shunt motor delivers power to a load at 1200 r/min. The armature circuit resistance of the motor is 0.2 Ω and the field resistance is 60 Ω. The line current is 8 A. Assume no rotational losses. What is the value of the load torque in N·m?
A DC motor with a shunt field winding has the following characteristics: Vr = 96.0 V R = 1.50 Q K = 0.352 m Specify the flux required to achieve a starting torque of 18 Nm.
A DC series motor is driving a load whose torque is constant and independent of the speed. The motor speed is increased from 1000 RPM to 1200 RPM by connecting a diverter resistance across its field. Find the Armature to the field winding current. Assume negligible drop across the field winding and a linear magnetic circuit
This course O d. None The flux o in a 18 KW, 120 V, Duplex Lap-Wound DC machine has been set to induce rated voltage at a speed of 1500 RPM. Find the product Ko, and find the induced torque in this machine at no load. Select one: O a. Product = 0,764, and Induced Torque = 114.6 N.m. O b. None Oc. Product = 0.764, and Induced Torque = 0 N.m O d. Not enough information is given to find the torque INEXT Dur
None
at of estion An eight-pole, 24 KW, 124 V, DC machine has a duplex LAP-wound armature which has 72 coils with 6 turns per coil. Its rated speed is 3000 RPM. Assume no dead zone Find the constant K and the flux per pole to produce 80 Volts at no-load conditions Select one: O a None O b. K= 68.86 and flux = 3.33 mWb/pole Oc. K= 68.755 and flux = 3.7 mWb/pole O d. K= 95.5 and flux = 3.7 mWb/pole
In a spinning industry, a 225 V, 8 pole shunt motor runs at a speed of 1450 rpm gives an output of 8 HP with an armature current of 32 A. The armature winding is wave-connected and it has 780 conductors. Its armature resistance is 0.1 Q and drop at each brush is 1 V. Find (i) Useful torque, (ii) Total torque, (iii) Useful flux per pole and (iv) Rotational losses occurring in the motor. [ 1HP= 746 W] Useful Torque Total Torque Flux per pole Rotational Loss in the Motor
both parts fast plz don't answer 3.00 pm