32. Review. A block of mass m2.00 kg and a block of mass m2 -6.00 kg are connected by a massless string over a pulley in the shape of a solid disk having radius 0.250 m and mass M-10.0 kg. The fixed, wedge- shaped ramp makes an angle of 6 - 30.0° as shown in Figure P10.32. The coefficient of kinetic friction is 0.360 for both blocks. (a) Draw force diagrams of both blocks and of the pulley. Determine (b) the accelera- tion of the two blocks and (c) the tensions in the string on both sides of the pulley M, R nm Figure P10.32

32. Review. A block of mass m2.00 kg and a block of mass m2 -6.00 kg are connected by a massless string over a pulley in the shape of a solid disk having radius 0.250 m and mass M-10.0 kg. The fixed, wedge- shaped ramp makes an angle of 6 - 30.0° as shown in Figure P10.32. The coefficient of kinetic friction is 0.360 for both blocks. (a) Draw force diagrams of both blocks and of the pulley. Determine (b) the accelera- tion of the two blocks and (c) the tensions in the string on both sides of the pulley M, R nm Figure P10.32

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Related questions

Q: An electric motor is used to drive the shaft of a small water pump. during the test drive, the…

Q: diameter wheel, consisting of a rim and six spokes, is constructed from a thin, rigid plastic…

A: GivenDiameter of wheel, d=43 cm=0.43 mNumber of spokes=6Linear mass density, λ=25 g/cmHeight of hill…

Q: Two buckets of mass ?1=19.3 kg and ?2=12.3 kg are attached to the ends of a massless rope which…

A: Let the tension in the string 1 and string 2 be denoted as T1 and T2 and their respected masses be…

Q: Question 4 М, R m1 M2 Refer to the figure above for this problem. A wooden block of mass m1 = 4.1 kg…

Q: A block of mass m, = 1.65 kg and a block of mass m, = 5.85 kg are connected by a massless string…

A: (a) Free-body-diagram

Q: A wheel of radius r = 32 cm and rotational inertia about the axis of I = 0.08 kg.m2 fixed on a…

A: SOlution: Given that radius R = 32 cm mass m = 2.6kg F= 6.1 N Inertia I = 0.08 kg/m2 angle = 30…

Q: A block of mass m, = 1.55 kg and a block of mass m, = 5.65 kg are connected by a massless string…

Q: A weight with mass ?w=250 g is tied to a piece of thread wrapped around a spool, which is suspended…

A: Write the net force experienced by mass mw.

Q: A hanging weight, with a mass of m₁ = 0.355 kg, is attached by a cord to a block with mass m₂ =…

A: It is given that:the hanging mass, m1=0.335 kgthe block mass, m2=0.845 kgthe mass of the pulley,…

Q: bullet of mass "m1" traveling horizontally with speed u hits a block of mass "m2" that is originally…

Q: A 51.0 g drink is left on a turntable causing it to turn with an angular speed of 7.10 rad/s. If the…

A: Given:Mass of drink = 51.0 gAngular speed = 7.10 rad/sCoefficient of static friction, μs =…

Q: A fairground ride (The Gravitron) spins its occupants inside a cylinder-shaped container. A child on…

A: Given data Mass of the child, m=50 kg Radius of the circular path, r=8 m

Q: A metal ball with 0.25 kg of mass and 0.075 m of radius rolled without slipping on a horizontal…

Q: It is known that an aluminum bar breaks when it is subjected to a traction of 25Kn. One end of the…

A: Consider that the tension in the aluminum road provides the centripetal force for the circular…

Q: The figure shows a bicycle wheel resting against a small step whose height is h = 0.130 m. The…

Q: A string is tied to Mass 1 (6.0 kg) at one end and mass 2 (3.0 kg) at the other. The string runs…

A: Given Mass of pulley = 2 kg Radius of pulley = 0.1 m Moment of inertia of pulley ( disc) = (1/2)…

Q: Two buckets of mass ?1=21.9 kg and ?2=15.1 kg are attached to the ends of a massless rope which…

A: Concept used: Kinetic energy of the system includes both translational as well as rotational kinetic…

Q: ionary. Then, the pulley is allowed to rotate as the block falls. Assum

A: Given: To find the values using given figure is calculated as: As per policy, here solved only…

Q: meter stick has a fixed axis of rotation at 50 m. A 4 kg mass is located at the 10 m marker, a 5 kg…

A: Length of the meter stick is L = 50 m For the system to be in equilibrium, the net torque of the…

Q: 2.00 kg and a block of 6.00 kg are connected by a massless string over a pulley in the shape of a…

Q: A block of mass m1 = 1.50 kg and a block of mass m2 = 6.25 kg are connected by a massless…

Q: d is fixed on its right side, which acts as its axis of rotation. A 200 N force acts on the rod 0.5…

Q: A block of mass m₁ = 2.45 kg and a block of mass m₂ = 6.30 kg are connected by a massless string…

A: a). Free body diagrams are drawnb). a = 0.2168 m/s2c). T1 = 9.1836 NT2 = 10.2676 NExplanation:

Q: An automobile crankshaft transfers energy from the engine to the axle at the rate of 128 kW when…

A: The power transfers from the engine to the axle,

Q: Masses are distributed in the x,y-plane as follows: 6.0 kg at (0.0, 0.0) m, 4.0 kg at (2.0, 0.0) m,…

A: Given value--- mass coordinate 6 kg (0,0) 4 kg (2,0) 5 kg (2,3) We have…

Q: A 8 ?? box resting on a horizontal, frictionless surface is attached to a 2 ?? weight by a thin,…

A: Given, Mass of the box resting (m1) = 8 kg Mass of the weight (hanging) (m2) = 2kg mass of pully (M)…

Q: 250 kg concrete wheel with a radius of 1.50 m is being pulled up a hill by a 725 kg cow, with a rope…

A: The gravitational force on the concrete wheel and the cow will act vertically downwards. F=mg This…

Q: A 240 g , 22-cm-diameter plastic disk is spun on an axle through its center by an electric motor.…

A: Given:m=240 gm = 0.240 kgd=22cm=0.22mr=d/2=0.11 mωo=0 rad/sω=1700rpm = 1700*2π60 rad/s = 177.93…

Q: A firm wants to determine the amount of frictional torque in their current line of grindstones, so…

A: Solution: Given data ω0=700 rev/min mass = 1.1 kg r=7.70 cm=7.7×10-2 m (a) Angular acceleration of…

Q: A block of mass m₁ = 1.60 kg and a block of mass m₂ = 5.75 kg are connected by a massless string…

A: Given,The mass of the first block The mass of the second block is The mass of solid disk is,M=10 kg

Q: The top edge of a thin rectangular metal plate with a mass of 2.80 kg is attached to a horizontal…

Q: A block of mass m, = 2.45 kg and a block of mass m, = 5.65 kg are connected by a massless string…

Q: 16. Figure shows a sports car capable of reaching 100 km/h speed in under 3 seconds (t < 3s). During…

A: Given: Speed of the sports car is 100 km/h and time is 3 secs Force is 5823 N Mass of the tire is…

Q: A block with mass m1 = 3.00 kg sits on a horizontal table and is attached to a rope. The rope then…

Q: A 250 g , 21-cm-diameter plastic disk is spun on an axle through its center by an electric motor.…

A: Given that:- Mass of disc=m=250gm

Q: A block (mass -3.0 kg) is hanging from a mass-less string that is wrapped around a pulley (moment of…

A: Solution: as given in the question: I = 1.3x10-3kg m2 R = 0.05 m L = 120 cm = 1.2 m mass of the…

Q: Two buckets of mass ?1=21.1 kg and ?2=11.9 kg are attached to the ends of a massless rope which…

Q: A block of mass m₁ = 1.80 kg and a block of mass m₂ = 6.05 kg are connected by a massless string…

A: Given data: mass m1 = 1.80 kg mass m2 = 6.05 kg radius R = 0.250 m pulley mass M = 10 kg angle θ=30o…

Q: Determine the range of weights W for which the 99-lb block is in equilibrium. All wheels and pulleys…

Q: What? This problem again? Not exactly. A block with mass m,ị = 3.00 kg sits on a horizontal table…

Q: A block of mass m, 1.50 kg and a block of mass m₂ 5.60 kg are connected by a massless string over a…

Question

32. Review. A block of mass m2.00 kg and a block of
mass m2 -6.00 kg are connected by a massless string
over a pulley in the shape of a solid disk having radius
0.250 m and mass M-10.0 kg. The fixed, wedge-
shaped ramp makes an angle of 6 - 30.0° as shown
in Figure P10.32. The coefficient of kinetic friction is
0.360 for both blocks. (a) Draw force diagrams of both
blocks and of the pulley. Determine (b) the accelera-
tion of the two blocks and (c) the tensions in the string
on both sides of the pulley
M, R
nm
Figure P10.32

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Trending now

This is a popular solution!

Step by step

Solved in 10 steps with 9 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

A sphere of mass 5 kg and a block of mass m2 =3 kg are connected by a light cord that passes over a pulley as shown in Figure. The radius of the pulley is R=20 cm, and the mass of the thin rim is 1 kg. The spokes of the pulley have negligible mass. The block slides on a horizontal surface. The kinetic coefficient of friction between block and horizontal surface is 0.1 Find for the linear acceleration of the two objects,
10.11
A block of mass m1 = 2.00 kg and a block of mass m2 = 6.00 kg are connected by a massless string over a pulley in the shape of a solid disk having radius R = 0.250 m and mass M = 10.0 kg. The fixed, wedge-shaped ramp makes an angle of θ = 30.08 as shown. The coefficient of kinetic friction is 0.360 for both blocks. (a) Draw force diagrams of both blocks and of the pulley. Determine (b) the acceleration of the two blocks and (c) the tensions in the string on both sides of the pulley.
9. A horizontal 800-N merry-go-round of radius 1.50 m is started from rest by a constant horizontal force of 50.0 N applied tangentially to the merry-go-round. Find the kinetic energy of the merry-go-round after 3.00 s. (Consider the merry-go-round to be a solid cylinder in determining its moment of inertia). Answer: 276 J
A 4.00-m-long, 500 kg steel beam extends horizontally from the point where it has been bolted to the framework of a new building under construction. A 70.0 kg construction worker stands at the far end of the beam. What is the magnitude of the gravitational torque about the point where the beam is bolted into place?
Two buckets of mass ?1=17.5 kg and ?2=15.1 kg are attached to the ends of a massless rope which passes over a pulley with a mass of ?p=8.53 kg and a radius of ?p=0.450 m. Assume that the rope does not slip on the pulley, and that the pulley rotates without friction. The buckets are released from rest and begin to move. If the larger bucket is a distance ?0=2.05 m above the ground when it is released, with what speed ? will it hit the ground?
A block of mass m1 = 2.05 kg and a block of mass m2 = 6.35 kg are connected by a massless string over a pulley in the shape of a solid disk having radius R = 0.250 m and mass M = 10.0 kg. The fixed, wedge-shaped ramp makes an angle of ? = 30.0° as shown in the figure. The coefficient of kinetic friction is 0.360 for both blocks. (c) Determine the tensions in the string on both sides of the pulley.
A car is undergoing an emissions test. The car is stationary on rollers while the gas pedal is depressed until the speedometer reads 60 km/h. The wheels are 54 cm in diameter. Find their angular speed.
Intro to Phys class. A 0.455 kg cart is allowed to roll smoothly (w/out friction) on a track. At the end of the track is a pulley. A 0.75 kg mass hangs over the pulley by a string tied to the cart. The hanging mass is initially 0.33 m above the floor. The pulley is a solid disk with a mass of 0.25 kg and a radius of 0.025 m.The system is released from rest. How fast is the cart moving when the hanging mass reachesthe floor? Assume the track is long enough that the cart remains on the track without running into the pulley. Starting from p1=p2
Am1= 19.0-kg object and a m 2 = 9.0-kg object are suspended, joined by a cord that passes over a pulley with a radius of R = 30.0 cm and a mass of M = 3.00 kg as seen in the Figure. The cord has a negligible mass and does not slip on the pulley. The pulley rotates on its axis without friction. The objects start from rest d = 5.00 m apart. Treat the pulley as a uniform disk, and determine the speeds of the two objects as they pass each other. (Your result must be in units of m /s and include 2 digit after the decimal point. Maximum of 4% of error is accepted in your answer. Take g = 9.80 m/s 2.) Hint: For solid cylinder of disk the moment of inertia about an axis through center of mass is IcOM = MR %3D d.
The figure below shows a human arm that weighs 41.10 N. The arm is extended outward and is motionless. The gravitational force Fg on the arm acts at point A, a distance of 0.2900 m from the shoulder joint, which is represented by point O. The shoulder pushes down and to the right on the humerus bone of the arm with a force Fs at point O, at an angle ? as shown. The deltoid muscle pulls back on the arm toward the shoulder with a tension force Ft. This tension force acts at a point 0.08000 m to the right of point O, and it is directed up and to the left, at a 12.00° angle with respect to the horizontal. An arm is extending horizontally to the right with a cutout that shows muscles in the upper arm. A horizontal dashed line extends along the bottom of the muscles and another along the top. Point O is labeled at the left end of the arm on the lower horizontal line. An unlabeled point lies 0.080 m horizontally to the right of point O. Point A lies 0.290 m horizontally to the right of point…