Answered: 3. The height of the water is 50 cm,… | bartleby

Related questions

Question

3. The height of the water is 50 cm, and the height of another liquid is 30 cm. What
is the density of another liquid if the pressure on waterside is 1.1 atm and at the
other side is 1.15 atm?

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

9. A liquid is flowing through a horizontal pipe whose radius is 2.22 x10-2 m. The pipe bends straight upward through a height of 9.8 m and joins another horizontal pipe whose radius is 3.82 x10-2 m. What is the speed of the liquid in the lower horizontal pipe if the pressure in both horizontal pipes is the same? x L0228) m/s
1. A nozzle with a diameter of 0.500 cm is attached to a garden hose with a radius of 0.900 cm. Water was flowing horizontally and frictionless from the garden hose at 1.50 m/s. If the absolute pressure in the nozzle is 1.01 x 105 N/m² (atmospheric, as it must be), what is the exit pressure in the hose? (modified from Ling et al., 2018, Example 14.5)
1. What is the ratio of the cross-sectional area at point 1 to the cross-sectional area at point 2? A1/A2= 2. What is the difference in pressure between points 1 and 2? (Find P2 - P1)P2 - P1 = 3. Which direction is the water flowing through the pipe?
10. Water flows at a rate of 730.0 liters/min through a horizontal 5.80-cm diameter pipe under a pressure of 6.50 x105 Pa. At one point, calcium deposits reduce the cross-sectional area of the pipe to 8.50 cm?. What is the pressure at this point? Pa
3. Water at a pressure of 4.30 atm at street level flows into an office building at a speed of 0.75 m/s through a pipe 4.60 cm in diameter. The pipes taper down to 1.70 cm in diameter by the top floor, 22.0 m above. Calculate the water pressure in such a pipe on the top floor. Pa
1. Piston A has a cross section of 1,600 cm² while that of B is 950 cm². B is higher that A by 2.6 m. if the intervening passages are filled with a liquid having a specific gravity of 1.24 and a force of 4.4 kN acting on B A) What must be the pressure at piston B B) What must be the pressure at piston A C) What must be the force exerted at piston A