3. The following data is related to a short brasscylinder of diameter D = 10 cm and height H = 20cm is initially at a uniform temperature of Ti =200°C. The cylinder is now placed in atmosphericair at 25°C, where heat transfer takes place byconvection with a heat transfer coefficient of h =60 W/m2°C. Calculate (a) the centertemperature of the cylinder, (b) the centertemperature of the top surface of the cylinder,and (c) the total heat transfer from the cylinder15 min after the start of the cooling.Properties The themal propertes of bras are given to be p=S8530k /m',C, =0.89 kJkg °C,k=110 Wm-°C, and a= 3.39 × 10 m² /s.

First of all we are having the properties of Brass at room temprature: k=110 W/m0C, density=8530…

3. The following data is related to a short brass cylinder of diameter D 10 cm and height H = 20 cm is initially at a uniform temperature of Ti = 200°C. The cylinder is now placed in atmospheric air at 25°C, where heat transfer takes place by %3D convection with a heat transfer coefficient of h = 60 W/m2 °C. Calculate (a) the temperature of the cylinder, (b) the center temperature of the top surface of the cylinder, and (c) the total heat transfer from the cylinder 15 min after the start of the cooling. center Properies The themal propeties o bas are given to be p=830 kg/m.C, = 0389 kJkg °C, k=110 Wm-°C, and a =3.39 × 10 m² /s.

3. The following data is related to a short brass cylinder of diameter D 10 cm and height H = 20 cm is initially at a uniform temperature of Ti = 200°C. The cylinder is now placed in atmospheric air at 25°C, where heat transfer takes place by %3D convection with a heat transfer coefficient of h = 60 W/m2 °C. Calculate (a) the temperature of the cylinder, (b) the center temperature of the top surface of the cylinder, and (c) the total heat transfer from the cylinder 15 min after the start of the cooling. center Properies The themal propeties o bas are given to be p=830 kg/m.C, = 0389 kJkg °C, k=110 Wm-°C, and a =3.39 × 10 m² /s.

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

The frames for a pair of eyeglasses have a radius of 2.14 cm at 20.0°C. Lenses with radius of 2.15 cm have to be inserted into these frames. To what temperature must the technician heat the frames to accommodate the lenses? The frames are made of a material whose thermal expansion coefficient is 1.30 10-4/°C.
3. (a) The rate of heat transfer through a wood shingles roof of 4.50 m length, 3.90 m width and in 8.50 cm thickness is 126.65 W. The temperature of outside and inside-surface is 33.5 °C and 26.5 °C, respectively. (i) Determine thermal resistance, R of the wood shingles roof. (ii) Calculate the thermal conductivity. Give your answer in 3 decimal places. (iii) If a glass wool with higher thermal resistance is used to replace the wood shingles roof, determine which material tend to have lesser rate of heat transfer.
A solid concrete wall has dimensions 4.0 m × 2.4 m and is 30 cm thick. The thermal conductivity of the concrete is 1.3 W/m ∙ K, and it separates a basement from the ground outside. The inner surface of the wall is at 18°C, and the outside surface is at 6°C. How much heat flows through the wall every hour?
The air temperature above coastal areas is profoundly influenced by the large specific heat of water. One reason is that the energy released when 1 cubic meter of water cools by 1.0°C will raise the temperature of an enormously larger volume of air by 1.0°C. Estimate that volume of air. The specific heat of air is approximately 1.0 kJ/kg ? °C. Take the density of air to be 1.3 kg/m3.
For heat transfer purposes, a standing man can be modeled as a 30-cmdiameter, 170-cm-long vertical cylinder with both the top and bottom surfaces insulated and with the side surface at an average temperature of 34°C. For a convection heat transfer coefficient of 15 W/m2 · °C, determine the rate of heat loss from this man by convection in an environment at 0°C.
A 12-cm x 18-cm circuit board houses on its surface 100 closely spaced logic chips, each dissipating 0.06 W in an environment at 40°C. The heat transfer from the back surface of the board is negligible. If the heat transfer coefficient on the surface of the board is 10 W/m2.K, determine (a) the heat flux on the surface of the circuit board, in W/m2;
Problem 5: Several ice cubes (ρi = 0.9167 g/cm3) of total volume Vi = 215 cm3 and temperature 273.15 K (0.000 °C) are put into a thermos containing Vt = 550 cm3 of tea at a temperature of 313.15 K, completely filling the thermos. The lid is then put on the thermos to close it. Assume that the density and the specific heat of the tea is the same as it is for fresh water (ρw = 1.00 g/cm3, c = 4186 J/kgK). Part (a) Calculate the amount of heat energy Qm in J needed to melt the ice cubes (Lf = 334 kJ/kg). Part (b) Calculate the equilibrium temperature TE in K of the final mixture of tea and water. Part (c) Calculate the magnitude of the total heat transferred QT in J from the tea to the ice cubes.
A homeowner is unhappy with her heating costs. One wall of her house is 4 meters tall and 8 meters wide and has no windows, and it is made of brick and mortar with a thermal conductivity of 1.0 W m K . It is 40 cm thick. The house is heated to a temperature of 20 ◦C inside. (a) What is the rate of heat loss through the wall on a day when it is 0◦C outside? (b) A layer of rock mineral wool, which has a thermal conductivity of 0.032 W m K is to be installed on the interior surface of the brick wall. How thick should the layer be to lower the rate of heat transfer through this wall to half its original value? (c) If the rock mineral wool is instead installed on the outer surface, is the thickness required the same?
An aluminum ring has an inner radius of 4.9973 cm at room temperature (20 °C). A copper ball has a radius of 5.0035 cm at the same temperature. To what final temperature (in °C) must you heat the ring for the ball (starting from room temperature) to be able to pass through it? (The linear thermal expansion coefficient for aluminum is 2.34 * 10-5 °C-1 and for copper is 1.76 * 10-5 °C-1.)
6. Go The block in the drawing has dimensions L, × 2L, × 3L, where L, = 0.30 m. The block has a thermal conductivity of 250 J/(s •m · C°). In drawings A, B, and C, heat is conducted through the block in three different directions; in each case the temperature of the warmer surface is 35 °C and that of the cooler surface is 19 °C. Determine the heat that flows in 5.0 s for each case. Lo 2L0 3Lo B A
Suppose a house's walls are 13.5 cm thick and and have an average thermal conductivity twice that of glass wool. Given: Thermal Conductivity of glass wool= 0.042k Calculate the rate of heat conduction, in watts, through the house's walls. Assume there are no windows or doors. The surface area of the walls is 120 m2 and their inside surface is at 16°C, while their outside surface is at 5.15°C .
A short brass cylinder (r = 8530 kg/m3, cp =0.389 kJ/kg·K, k = 110 W/m·K, and a 5 *.39 3 1025 m2/s) of diameter 8 cm and height 15 cm is initially at a uniform temperature of 150°C. The cylinder is now placed in atmospheric air at 20°C, where heat transfer takes place by convection with a heat transfer coefficient of 40 W/m2·K. Calculate (a) the center temperature of the cylinder; (b) the center temperature of the top surface of the cylinder; and (c) the total heat transfer from the cylinder 15 min after the start of the cooling.