3. The beam and loading shown in figure below, is a simply supported beam with a span of 7.2 m and fully laterally supported along its entire length. The service dead load = 10 kN/m (including the weight of the beam), and service live load is 20 kN/m. The maximum allowable deflection is L/240. Use A36M steel materials. Design the beam and check the adequacy of the selected section for: a.Flexural strength b. Shear strength c. Deflection control. {D... ŞD.L. = 10 kN Im = 20 7.2m EN IM

3. The beam and loading shown in figure below, is a simply supported beam with a span of 7.2 m and fully laterally supported along its entire length. The service dead load = 10 kN/m (including the weight of the beam), and service live load is 20 kN/m. The maximum allowable deflection is L/240. Use A36M steel materials. Design the beam and check the adequacy of the selected section for: a.Flexural strength b. Shear strength c. Deflection control. {D... ŞD.L. = 10 kN Im = 20 7.2m EN IM

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: le Choice 2.92 mm 1.84 mm 2.31 mm 3.76 mm +x

Q: A variable cross-sectional beam is pinned from the point B by BD bar as shown. Flexural rigidity of…

Q: A wide flange A60 steel column has a length of 5.8meters and pinned ends. If Sx=857x103 mm3,…

A: The following are the given information. A=7243 mm2 Fy=414 MPa Sx=857×103 mm3 Sy=135×103 mm3 d=358…

Q: A B L P D L L Calculate the deflection at A (the end opposite of the load) and at D (under the…

A: Given Data Find the deflection at A and D.

Q: 6. For the beam and loading shown, calculate (a) the equation of the elastic curve for portion BC of…

Q: The simply supported beam consists of a W460 × 82 structural steel wide-flange shape [E = 200 GPa; I…

Q: A fixed-end beam is subjected to a point load at mid-span. The beam has a rectangular cross section…

A: Given data: E=11 GPa hb=2

Q: by 늘 wo B 늘 C X

A: Given Data:Length L=6.3md=300mmbf=215mmtf=14mmtw=10mmIt is required calculate the largest intensity…

Q: strain in the tension bars equal to 0.004 and in the design process use 60% of this rho max.…

A: Given : DL = 10 kN/m LL = 8 kN/m UDL & 15 kN/m UVL 8 m length fc = 21 MPa and fy = 276 MPa

Q: art 1 The simply supported beam below is initially designed to undertake a concentrated factored…

A: According to given data

Q: Select a standard rolled steel I-section for the simply supported beam shown in Figure. A factor of…

A: NOTE - Hi! Thank you for the question As per the honor code, We’ll answer the first question since…

Q: 1. For the built-up tee-shape (Fy= 350 MPa) shown: a). determine the yield moment M, with respect to…

A: AAs per our guidelines we are supposed to answer?️ only one question. Kindly repost other questions…

Q: 4. The beam shown in figure below (W 410 x 46.1) has continuous lateral support of both flanges. The…

Q: Deflection Given: the beam cross-section shown have the following cross-sectional properties f'c…

A: Gross moment of inertia(Ig)Critical internal moment(Mcr)Maximum service load(Ma)Critical moment of…

Q: A 2.5 m span cantilever beam has a rectangular section and reinforcement as shown in Figure below.…

Concept explainers

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.

Question

3. The beam and loading shown in figure below, is a simply supported beam
with a span of 7.2 m and fully laterally supported along its entire length.
The service dead load = 10 kN/m (including the weight of the beam), and
service live load is 20 kN/m. The maximum allowable deflection is L / 240.
Use A36M steel materials. Design the beam and check the adequacy of
the selected section for:
a.Flexural strength
b. Shear strength
c. Deflection control.
SD.L. = 10 kN/m
W²L.L. = 20 kN/m
7.2m

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Introduction to the question

VIEW

Step 2: calculation part

VIEW

Step 3: calculation part

VIEW

Step 4: calculation part

VIEW

Solution

VIEW

Step by step

Solved in 5 steps with 19 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Calculate Maximum Deflection for Beam 4 Use E = 25 GPa The section B4 is 200mm x 350mm Total DL = 14. 166 kN/m Live Loads: 2.533 kN/m WU = 21. 052 kN/m 1.5m 5.5m C3 C1 GB1 B2 S2 B4 OPEN B3 C2 C1 GB2
predict the maximum stress and deflection in the simply-supported aluminum beam shown below, with h = 1 in, b = 10 in, L = 4 ft, and P = 5 psi.
1- Calculate maximum deflection of the beams. 2- Check the suitability of the section assuming the code limitation of L/240. 3- If maximum deflection doesn’t meet the code requirement, propose your solution. Steel: Section properties: I=366,000,000 mm4, E=2*(10)5 N/mm2
please solve part 4.5
37. Select an aluminum I-beam shape to carry the load shown in Figure P3-37 with a maximum stress of 12 000 psi. Then compute the deflection at each load. 400 lb 20 in R₁ 30 in 500 lb 40 in TR₂ I RUDA
please solve part 4.4
The beam shown in the figure below has the following properties:28-ft simple span f'c = 4000 psi fr (7.5) (Square root of f prime X c) reinforced concrete weight = 150 lb/ft³ Solve for: 1.) The total area of the section in in² 2.) The gross moment of inertia in inª 3.) The cracking moment in kp-ft 4.) The self weight of the beam in kp/ft 5.) The superimposed uniform load that will cause the beam to crack in k/ft 4 in. III 22 in. 30 in. in. 3 #9 ● -12 in. ● 2 in. 2 in.
Plz
JC = For the beam and loading shown, determine (a) the deflection at C, PL 0 A P Bt² 2 EI (b) the slope at end 4. PL ↑P -L/3L/3L13 EI D
please solve part 4.3
please solve part 4.1
A contractor has ordered a composite beam. The beam is constructed of Douglas Fir wood and two plates of Stainless 304 steel. The allowable bending stresses are as follows: (Oallow)w = 22 MPa (Oallow) st = 140 MPa What is the maximum moment that can be applied to the beam (in kN-m)? Express your response using three significant digits. y 150 mm M 30 mm 80 mm 30 mm