3) 100,000 lb/hr of air with humidity of 0.05% is used in the drying of tablet granules to give 1000 lb of dry granules containing 5% w/w water. The air leaves the dryer containing 0.25% humidity. What is the initial percent of water in the original moist granules.

Q: A number of polymers, including polyvinylchloride, polystyrene, and polymethylmethacrylate, are made…

A: The reason for rotary dryers, fluidized-bed dryers and sprouted dryers are good choices for polymer…

Q: - Wet biomass with a moisture of 75 wt.% (as received basis) is dried through a roller press as…

A: Given:Initial moisture content in the biomass, Xinitial= 75 wt %Final moisture content in the…

Q: The moisture content of wood is reduced from 40% to 5% using a dryer. Calculate the amount of…

A: Given: Moisture content initial=0.4 Moisture content final=0.05 weight of wood =1 kg Required to…

Q: Drying is widely used to remove solvents from coated webs, which include coated paper and cardboard,…

A: The types of dryers that can be used with coated webs are: Roll support dryers Floatation dryers

Q: Paper is made from a suspension of fibers in water. The process begins by draining the fibers to a…

A: The type of dryer required to dry the paper is to be mentioned.

Q: Powdered milk can be produced from liquid milk in a three-stage process: (1) vacuum evaporation in a…

A: The reason for three-stage process is preferable to a single stage process involving just spray…

Q: Why does condensation form most rapidly on the coldest object in a room—for example, on a glass of…

A: The reason for the fast condensation on the coldest object in a room is to be mentioned.

Q: Q6: A wet solid is dried from 28 per cent to 10 per cent moisture, under constant drying conditions…

A:

Q: i. percentage recirculation of air ii. Heat Load

A:

Q: A food product with an initial moisture content of 32.0% is to be dried to a final moisture content…

A:

Q: Gilliland and Sherwood obtained data for the drying of a water-wet piece of hemlock wood measuring…

A:

Q: a) Explain the different forms of distillation with suitable diagram as given; 1. Extractive…

A: 1. Extractive distillation Draw the diagram of extractive distillation as follows:

Q: To measure cloud point a sample is placed in test-tube in a cooling bath and at different…

A: Cloud Point It is the minimum temperature where the first crystal formation starts. A freezer that…

Q: Slab building boards contain 17% moisture by weight. They are dried to a water content of 1% by…

A: Given that, The weight% of moisture in the building boards = 17% The weight% of solids in the…

Q: An experimental drier is being used to reduce the moisture content of bagasse to be used for…

A: It is given that wet bagasse is having 50% moisture initially. Initial weight of bagasse = 5.75Kg…

Q: A wet paper pulp contains 75% water. After 100 kg of water removed in a dryer, it is found that the…

A:

Q: Thermodynamically explain why we need relatively high equilibrium vapor pressure compared to ambient…

A: Vapor pressure is defined as the pressure exerted by the vapor at equilibrium with its phases at a…

Q: In the drying of a wet solid, if the air temperature is Ta and the temperature of surface solid is…

A: Consider the drying of the wet solid particles. The temperature of air is Ta and the temperature of…

Q: Define the following in chemical engineering perspective and draw an arrow block diagram of the…

A:

Q: A sample has initial mass of 10 grams. The quantity of water removed in the oven is 2 grams. The…

A: The initial mass of the sample, mi = 10 g Mass of moisture removed from the sample, mM = 2 g

Q: A batch dryer can handle 5000 kg feed per hour which contains 30% moisture. How much moisture…

A: Given Feed rate F = 5000 kg / h Feed moisture contain = 30% Exiting dryer contain only 5 % moisture

Q: Wet solids are dried from 30% to 8% moisture under constant drying conditions in 16.9 hours. The…

A: Drying is the process of removal of moisture from a wet solid using a gas stream or by passing…

Q: Use the information in Tables 2D.1 and 2E.1 to calculate the energy that must be transferred as heat…

A: Mass of ice = 100 g

Q: In the drying of a wet solid, if the air temperature is ĐA and the temperature of surface solid is…

A: Given, Temperature of wet solid is θS. Temperature of air is θA.   Drying is a process of transfer…

Q: In ceramic industry, the removal of moisture in ceramic mixture is done through drying. If the feed…

A: Given Data  The amount of moisture in feed =0.50The moisture upto which the drying should be done =…

Q: During an experimental drying test of hygroscopic wet solid, it took 8.5 hours to dry the solid from…

A:

Q: During flour milling, wheat grains are taken at a rate of 4 t/h and goes to the cleaning system. As…

A: Milling of wheat- Flour Milling of wheat is a simple physical process in which whole grains turn…

Q: The nature of surfaces affects the absorption and the reflection of radiation. Assume that you are…

A: Out of the two given bodies, the one which heats up quickly and one which cools faster is to be…

Q: 1. What is the work of drying process? a) Decreases the moisture content b) Vaporizes water c)…

A: Answer:1) Drying is a mass switch system consisting of the removal of water or some other solvent by…

Q: A carburizing process is carried out on a 0.10% C steel by introducing 1% C at the surface of 980℃…

A:

Q: Are these statements about the evaporators true? Statement 1: Product foaming during vaporization is…

A: During the vaporization of a product, foaming is prevalent. Special designs for the feed intake may…

Q: 3.51 A tray dryer is fed with 2000 kg of wet orthonitroaniline containing 15% water. The dried…

A: