(2) A horizontal pipe 10cm in diameter reduced to a pipe of 5cm in diameter. Ifthe pressure of water in the large pipe is 8x104 Pa and in the small one is6x10 Pa. Find:(a) The velocity in the large pipe?(b) The velocity in the small one?(c) The mass flow rate in the pipe?

Answered: Image /qna-images/answer/6f20f28c-eb64-4bb9-87f0-b5a011576c11.jpg

(2) A horizontal pipe 10cm in diameter reduced to a pipe of 5cm in diameter. If the pressure of water in the large pipe is 8x10 Pa and in the small one is 6x10 Pa. Find : (a) The velocity in the large pipe? (b) The velocity in the small one? (c) The mass flow rate in the pipe?

(2) A horizontal pipe 10cm in diameter reduced to a pipe of 5cm in diameter. If the pressure of water in the large pipe is 8x10 Pa and in the small one is 6x10 Pa. Find : (a) The velocity in the large pipe? (b) The velocity in the small one? (c) The mass flow rate in the pipe?

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Find the pressure difference required between the ends of a 2.00 m long, 1.00 mm diameter horizontal tube for 40° C water to flow through it at an average speed of 4.0 m/s. Water at 40° has a viscosity of 0.7 x 10-3 Pa s. The pressure difference is equal to ______x105 Pa. Recall the equation for volume flow rate with viscosity: Δ?Δ?=??4Δ?8??
Bird bones have air pockets in them to reduce their weight—this also gives them an average density significantly less than that of the bones of other animals. Suppose an ornithologist weighs a bird bone in air and in water and finds its mass is 49.3 g and its apparent mass when submerged is 4.06 g (the bone is watertight). (a) What mass (in g) of water is displaced? (b) What is the volume (in cm3) of the bone? (c) What is its average density (in g/cm3)?
Suppose you have a 8.6 cm diameter fire hose with a 3.8 cm diameter nozzle. Calculate the pressure drop due to the Bernoulli effect as water enters the nozzle from the hose at the rate of 40.0 L/s. Take 1.00 × 103 kg/m3 for the density of the water. To what maximum height, in meters, above the nozzle can this water rise? (The actual height will be significantly smaller due to air resistance.)
A container of cross-sectional area 107 cm2 contains liquid of density 1.75 g/cm3 to a height of 6.80 cm above a small hole of area 1.00 cm2 in the side. (a) Find the speed of the fluid as it leaves the hole.(b) Find the flow rate through the hole.
(a) Calculate the absolute pressure at the bottom of a fresh-water lake at a depth of 27.5 m. Assume the density of the water is 1.00 × 103 kg/m3 and the air above is at a pressure of 101.3 kPa. (b) What force is exerted by the water on the window of an underwater vehicle at this depth if the window is circular and has a diameter of 35.0 cm?
At 20°C, the viscosity of water is 1.0x10-3 Pa-s and the viscosity of molasses is 51 Pa-s. Consider two tubes of the same length L, with fixed pressure difference Ap across each pipe. If water flows through Pipe 1 and molasses flows through Pipe 2, and both have the same flow rate Q, what is the ratio of the radius of Pipe 2 to Pipe 1?
Calculate the Reynolds numbers for the flow of water through a nozzle with a radius of 0.270 cm and a garden hose with a radius of 0.940 cm, when the nozzle is attached to the hose. The flow rate through hose and nozzle is 0.485 L/s. (Assume the temperature of the water is 20°C.) (a) a nozzle with a radius of 0.270 cm Can the flow possibly be laminar? Yes No (b) a garden hose with a radius of 0.940 cm Can the flow possibly be laminar? Yes No
Water enters a house from a ground pipe with an inside diameter of 0.02m at an absolute pressure of 4.0 x 105 Pa. A pipe that is 0.01 m in diameterleads to the second-floor bathroom 5.0m above the ground floor. The flowspeed at the ground pipe is 1.5 m/s. Find the following:(a) flow speed on the second floor; and(b) pressure.
Suppose you have a 8.8 cm diameter fire hose with a 3.6 cm diameter nozzle. a) Calculate the pressure drop due to the Bernoulli effect as water enters the nozzle from the hose at the rate of 40.0 L/s. Take 1.00 × 103 kg/m3 for the density of the water. b) To what maximum height, in meters, above the nozzle can this water rise? (The actual height will be significantly smaller due to air resistance.
(c) Water is circulating through a closed system of pipes in a two-storey house. On the ground floor, the water has a gauge pressure reading of 3.5 × 105 Pa and has a speed of 2.1 m/s. However, on the upper floor, which is 3.8 m higher, the speed of the water is 3.7 m/s. The pipe widths are different on the two floors. Calculate the pressure of the water on the upper floor of the house? Take the density of water to be 1000 kg/m
A gasoline tank, with cross-section area A1, filled to a depth h. The space above the gasoline contains air pressure po, and the gasoline flows out through a short pipe with area A² at the bottom of the tank. Derive expressions for the flow speed in the pipe and the volume flow rate.
The Venturi meter shown in the figure can be used as fluid flow meter. Suppose the device is used at a service station to measure the flow of the gasoline (density = 7.00 x 10^2 kg/m⁄ ^3) through a hose having an outlet radius of 1.20 cm. If the difference in pressure is measure to be P1 − P2 = 1.20 kPa and the radius of the inlet tube to the meter is 2.40 cm, find (a) the speed of the gasoline as it leaves the hose and (b) the fluid flow rate in cubic meters per second.