18. A television signal (video and audio) has a bandwidth of 4.5 MHz. This signal is sampled, quantized, and binary coded to obtain a PCM signal. (a) What is the sampling rate if the signal is to be sampled at a rate 20% above the Nyquist rate. (b) If the samples are quantized into 1024 levels, determine the number of binary pulses required to encode each sample. (c) Determine the binary pulse rate (bits per second) of the binary-coded signal, and the minimum bandwidth required to transmit this signal.

18. A television signal (video and audio) has a bandwidth of 4.5 MHz. This signal is sampled, quantized, and binary coded to obtain a PCM signal. (a) What is the sampling rate if the signal is to be sampled at a rate 20% above the Nyquist rate. (b) If the samples are quantized into 1024 levels, determine the number of binary pulses required to encode each sample. (c) Determine the binary pulse rate (bits per second) of the binary-coded signal, and the minimum bandwidth required to transmit this signal.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Aliasing refers to a. Sampling of signals less than at Nyquist rate b. Sampling of signals greater than at Nyquist rate c. Sampling of signals at Nyquist rate d. None of the above
The Nyquist rate for sampling an analog electrocardiogram (ECG) signal with 80 Hz highest frequency is 150 Hz. True False
Digital communications Encoding and Decoding of Information Signal 1- Discuss the effect of varying the frequency of the sampling signal on the output.
to X2 The signal flow graph above has Select one: a. (3) Forward paths and (2) non touching loops b. (3) individual loops and (2) non touching loops c. (3) Forward paths, (3) individual loops and (2) non touching loops d. (3) Forward paths and (3) individual loops
2/ Information in an analog waveform, whose maximum frequency is 10 kHz, will be transmitted using a minimum sampling rate and a 32-PAM system. transmitted using a minimum sampling frequency and a 32-PAM system. The quantization distortion shall not exceed 0.01% of the The quantization distortion must not exceed 0.01% of the peak-to-peak value of the analog signal. a/ What is the minimum PCM word size to be used in the system? b/ What is the baud rate?
3. A dad ful comirester, Conneet ed to 230 v, fo Mz. Sousie bf. feedng a locel R: 10 n n senies wish a levnge Induadomre thad makes the load lenent rippie free · for a firing anyle of ur°, ewewlade the input and oatpud performante panametess of thik comveater.
What is a minimum number of sampling frequency required to have distortion free reconstruction of a digital signal from its samples?
For a signal in the range of 6 to 63, in order to have a resolution of 0.17, we need. Number of levels Select one: a. 337 b. 338 c.333 For the device measuring temperature in the range of 36.8:44.5, and the results are stored in 5 bits, the step size is Select one: a. 0.24839 b. 0.03182 c. 2.62258
7. Why does PTM require a higher sampling frequency than PAM? a. The amplitude of PTM signals is constant. b. There are more sidebands in the first replica of a PTM c. Signal than in a PAM signal. d. A sample/hold circuit requires a higher sampling frequency. e. There are fewer sidebands in the first replica of a PTM signal f. Than in a PAM signal.
(b) A Digital Signal Processing system, with a 16-bit uniformly quantising analogue-to- digital converter and a sampling rate of 20 kHz, is used to process analogue signals band- limited to the frequency range 0 Hz to 5 kHz. Estimate the maximum achievable signal- to-quantisation noise ratio (SQNR) for sinusoidal input signals, and state what assumptions it is reasonable to make about the statistical and spectral properties of the quantisation noise.
2. Define aliasing, and why it should be avoided? The spectrum of selected CT signal is given below. Draw the spectrum of the sampled signal with critical sampling, undersampling by 30%, and oversampling by 50%. Discuss the result. 1.0 -100 100 f (kHz)