1500 lb/h of a waste mixture of 40 percent benzene, 50 percent toluene, and 10 percent water is burned with 25 percent excess air. Determine the total heat release and the percent by volume of each component in the flue gas.

Q: Air at 35 'C and RH 45% is flown into the heating coil so that the temperature of the dry balls is…

A: Given that, The initial temperature of air T1 =35oC Relative humidity of air RH = 45% Dry bulb…

Q: What is the purpose of soaking fresh cucumbers in a jar of vinegar (5% acetic acid)?  What does the…

A: Vinegar is made by the process of fermentation and is the combination of water and acetic acid…

Q: Equal masses of the three metals shown below are all initially at 25oC. copper (c = 0.385 J/goC)…

A: From the definition of specific heat we know, specific heat is measure of amount of heat required…

Q: Freshly cut lumber is dried to reduce its weight, increase its strength, and to prevent decay. In an…

A: Mass of wet lumber (B)= 100lb1.82 lb of dry air eneters for ever 1 lb of wet lumberTherefor  the…

Q: 2. [Mixing] Chlorine gas containing 2.4% Oz is flowing through an earthenware pipe. The gas flow is…

A: Given that : Feed gas (F) composition is: Chlorine gas, Cl2=2.4% =0.024 Oxygen gas, O2= 97.6% =…

Q: iv) Explain two reasons of having the recycle stream in the above process.

A: The stream where some part of the product is returned and this stream is mixed with the feed stream.…

Q: Accetylene gas (C2H2) is often used by plumbers,welders,and glass blowers because it burns in oxygen…

A: Given data:- Acetylene gas is used by plumbers,welders,and glass blowers because it burns in oxygen…