10-53 Consider an ideal steam regenerative Rankine cycle with two feedwater heaters, one closed and one open. Steam enters the turbine at 10 MPa and 600°C and exhausts to the condenser at 10 kPa. Steam is extracted from the turbine at 1.2 MPa for the closed feedwater heater and at 0.6 MPa for the open one. The feedwater is heated to the condensation temperature of the extracted steam in the closed feedwater heater. The extracted steam leaves the closed feedwater heater as a saturated liquid, which is subsequently throttled to the open feedwater heater. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the mass flow rate of steam through the boiler for a net power output of 400 MW and (b) the thermal efficiency of the cycle. Turbine Boiler 1-y-z Pump II Орen FWH Closed FWH Pump I Condenser

10-53 Consider an ideal steam regenerative Rankine cycle with two feedwater heaters, one closed and one open. Steam enters the turbine at 10 MPa and 600°C and exhausts to the condenser at 10 kPa. Steam is extracted from the turbine at 1.2 MPa for the closed feedwater heater and at 0.6 MPa for the open one. The feedwater is heated to the condensation temperature of the extracted steam in the closed feedwater heater. The extracted steam leaves the closed feedwater heater as a saturated liquid, which is subsequently throttled to the open feedwater heater. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the mass flow rate of steam through the boiler for a net power output of 400 MW and (b) the thermal efficiency of the cycle. Turbine Boiler 1-y-z Pump II Орen FWH Closed FWH Pump I Condenser

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: ates on a reheat Rankin MPa and 500°C and the l pressure of 10 kPa. Ass

A: Isentropic flow is nothing but the entropy value is constant if the process moves from point A to…

Q: Consider an 80 MW coal-fired steam power plant that runs on a reheat Rankine cycle. Steam enters the…

A: Answer: The plant monthly consumption of coal is 24804 tons/month.

Q: Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the…

Q: An ideal vapor-compression refrigeration cycle using refrigerant-134a as the working fluid is used…

A: 1.At State 1Mass Flow rate of Refrigerant The Evaporator Temperature of Refrigerant Now, At…

Q: standard vapor compression cycle using R134a as the working fluid has a condensing temperature of…

Q: An ideal vapor-compression cycle uses R-134a as the working fluid. Recall that the compressor…

A: Pressure of the evaporatorPressure of the condenserTemperature at the entry of the…

Q: An ideal reheat Rankine cycle with water as the working fluid operates the inlet of the…

A: The stepwise procedure to solve this problem is shown in the following attached images:

Q: May you please be as detailled as possible. Thank you

A: (a) Drawing the PV and TS diagram for the given Rankine cycle as shown below –

Question

10-53 Consider an ideal steam regenerative Rankine cycle with two feedwater heaters, one closed and one open. Steam enters the
turbine at 10 MPa and 600°C and exhausts to the condenser at 10 kPa. Steam is extracted from the turbine at 1.2 MPa for the
closed feedwater heater and at 0.6 MPa for the open one. The feedwater is heated to the condensation temperature of the extracted
steam in the closed feedwater heater. The extracted steam leaves the closed feedwater heater as a saturated liquid, which is
subsequently throttled to the open feedwater heater. Show the cycle on a T-s diagram with respect to saturation lines, and determine
(a) the mass flow rate of steam through the boiler for a net power output of 400 MW and (b) the thermal efficiency of the cycle.
Turbine
Boiler
1-y-z
Pump II
Open
FWH
Closed
FWH
Pump I
Condenser

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 6 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500°C and is cooled in the condenser at a pressure of 7.5 kPa. Show the cycle on a T-s diagram with respect to saturation lines.
A flashed steam geothermal power plant is located where underground hot water is available as a saturated liquid at 700 kPa. The well-head pressure is 600 kPa. The flashed steam enters the steam turbine at 500 kPa and expands to 15 kPa when it is condensed. The flow rate from the well is 29.6 kg/s. Determine the cycle thermal efficiency of the plant in %. If the steam table is needed, please use the green book entitled "Thermodynamics Properties of Water Including Vapor, Liquid, and Solid Phases" by Keenan, Keyes, Hill, and Moore.
Compare the thermal efficiency and turbine-exit quality (temperature if superheated) at the condenser pressure for a simple Rankine cycle and the reheat cycle when the boiler pressure is 5 MPa, the boiler exit temperature is 500°C, and the condenser pressure is 20 kPa. The reheat takes place at 0.5 MPa and the steam leaves the reheater at 500°C. (Enthalpies are in KJ/kg.) Without the reheater, the heat added is: The enthalpy entering the condenser is: The net Work is: The enthalpy entering the reheater is: Without the reheater, the net Work is:
An ideal Rankine cycle with one stage of reheat utilizes steam as working medium. Boiler pressure is 4 MPa, the boiler exit temperature is 400°C, and the condenser pressure is 10 kPa. The reheat takes place at 0.4 MPa and the steam leaves the reheater at 400°C. (Enthalpies are in KJ/kg.). Determine the thermal efficiency of the cycle. Determine also the thermal efficiency if there is no reheater. The quality at the exhaust of the low pressure turbine is: Select one: O a. 13% O b. 97% O c. 3% O d. 87%
Consider an ideal steam regenerative Rankine cycle with two feedwater heaters, one closed and one open. Steam enters the turbine at 10 MPa and 500 C and exhausts to the condenser at 10 kPa. Steam is extracted from the turbine at 0.7 MPa for the closed feedwater heater and 0.3 MPa for the open one. The extracted steam leaves the closed feedwater heater and is subsequently throttled to the open feedwater heater. Show the cycle on a T-s diagram with respect to saturation lines, and using only the data presented in the data tables given below determine a) the fraction for steam leaving the boiler that is extracted at 0.3 MPa z=0.1425 b) the fraction of steam leaving the boiler that is extracted at 0.7 MPa y=0.06213 c) the heat transfer from the condenser per unit mass leaving the boiler q_out=1509 kJ/kg d) the heat transfer to the boiler per unit mass leaving the boiler qin=2677 kJ/kg e) the mass flow rate of steam through the boiler for a net power output of 250 MW m'=214.1 kg/s f) the…