1. The water in a lake has an average temperature of 15°C. If the barometric pressure of the atmosphere is 720 mm of Hg (mercury), determine the gage pressure and the absolutepressure at a water depth of 14m. Take pw-999.2 kg/m and pHe 13,550 kg/m2.2. If the absolute pressure in a tank is 140 kPa, determine the pressure head in mm of mercury. The atmospheric pressure is 100 kPa and PHg-13,550 kg/m.3. The soaking bin contains ethyl alcohol used for cleaning automobile parts. If the pressure in the enclosure is pe-0.5 psi, determine the pressure developed at point A and the height hof the ethyl alcohol level in the bin. Take yen-49.3 lb/ft'.1 ft3 ftB6 ft2 ft,

Hi! Thank you for the question As per the honor code, We’ll answer the first question since the…

1. The water in a lake has an average temperature of 15°C. If the barometric pressure of the atmosphere is 720 mm of Hg (mercury), determine the gage pressure and the absolute pressure at a water depth of 14m. Take pw-999.2 kg/m and pH 13,550 kg/m.

1. The water in a lake has an average temperature of 15°C. If the barometric pressure of the atmosphere is 720 mm of Hg (mercury), determine the gage pressure and the absolute pressure at a water depth of 14m. Take pw-999.2 kg/m and pH 13,550 kg/m.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Water flows through a pipe at 144 L/s that changes gradually in diameter from 188 mm at point A to…

Q: A pressure gage connected to a tank reads 50 psi at a locat 29.1 inches Hg. Determine the absolute…

A: Barometric pressure =29.1in HGPatm=γhgzPatm=13.6×62.429.112Patm=2057.9lbft2

Q: Question 39 A lake has a maximum depth of 60 m. If the mean atmopheric pressure in the lake region…

A: Given data: Maximum depth of lake, h = 60 m The mean atmospheric pressure, Patm=91 kPa The unit…

Q: Determine the elevation difference, Ah, between the water levels in the two open tanks shown in the…

A: The answer is found to be Difference in level of two tank = 7.6 cm For explanation please refer the…

Q: Determine the gage pressure (kPa) 2.0m below the surface of a body of liquid (specific gravity 1.50)…

A: The values given in the question are as follows: The specific gravity of liquid(Sg)=1.5 The density…

Q: At the surface of a freshwater lake, the pressure is 105 kPa. What is the pressure increase in going…

Q: Problem #1 dos bes-08 A pump is used to transport water to a higher reservoir. temperature is 20°C,…

Q: Calculate the value of pressure ∆p onside the rain water droplet , if we know the radius R=0.2mm and…

A: GIVEN- r=0.2mm δ=0.074N/m=7.4×10-5N/mm2∆P=?

Q: The water is flowing with a velocity of 1.5 m/s in a pipe of length 2500 m and diameter 500 mm. A…

A: given- velocity V=1.5 m/sLength of pipe L=2500 mdiameter d=500 mmtime of closure t=25 s

Q: 2-2. The water in a lake has an average temperature of 15°C. If the barometric pressure of the…

Q: If I m head of water = 10 kPa and 1 atm = 100 kPa, vapour pressure of water at 20°C = 2.5 kPa, at…

Q: 1. Solve for the absolute pressure of oil at 10- m below its surface if the barometric reading is…

Q: The barometric pressure p (in inches of mercury) at an altitude x mile above sea level satisfies the…

A: To Determine Barometric pressure (p) at 30,000 ft

Q: A glass tube 1.60 m long and having a diameter of 2.5 cm is inserted vertically into a tank of oil…

Q: A tank of surface area 22m² contains water up to a depth of 5.8m. What will be : i) Weight of water…

A: Area =22m2 depth =5.8m

Q: The standard value of atmospheric pressure at sea level is: Patm (sea level) = 1.000 atm = 101.3 kPa…

A: Given:Required:Denver's atmospheric pressure in atm

Q: At the surface of a freshwater lake, the pressure is 105 kPa. Required information What is the…

Q: a.) Determine the pressure difference between the two vessels when the difference in the levels of…

Q: At 100°C of temperature, 3.5 atm vapour pressure of water is equivalent to: 1. 350.0000 kPa 2.…

A: Given data- Temperature T=100oCVapour pressure VP=3.5 atmTo Find-Vapour pressure of water Equivalent…

Q: The standard value of atmospheric pressure at sea level is: Patm (sea level) = 1.000 atm = 101.3 kPa…

Q: A water pie gradually changes from 150mm ata point x to 450mm at point y. Point x is 5m below point…

Q: . Considering the Figure shown below, determine the absolute pressure of tank A and tank B. Let SGHG…

A: Specific gravity of Mercury = 13.6,patm= 101kPa = 101×10³PaTo find :- Absolute pressure of tank A…

Q: 3. The absolute pressure inside the water of a lake in the summer: A. is the same at all points B.…

A: Absolute pressure is defined as the sum of gauge pressure and atmospheric pressure at a point

Q: A tube well having a diameter 15 cm fully penetrates a confined aquifer of thickness 10 m. The…

A: Confined aquiferDiameter of well (d) = 15cm Thickness of confined aquifer (B) = 10m Discharge from…

Q: 3. Taking the coefficient of compressibility of water to be 2200 MPa, determine the pressure…

Q: The gage pressure in a liquid at a depth of 2.5 m is read to be 26 kPa. Determine the gage pressure…

A: Given Data Gauge pressure at depth of 2.5m (P2.5) = 26 kPa Determihe the gauge pressure in the same…

Q: A Cylindrical tank having a diameter of 2m and height of 4m Is open at one end and closed at the…

Q: 1. You dive 5 m down in the ocean (p which of the following choices? (a) 49 kPa (b) 100 kPa (c)77…

A: CORRECT OPTION:-(D) 150 KPA

Q: 3) The density of a liquid, p (kg/m³) is expressed as a function of h(m), distance from the liquid…

A: Density : A substance's density indicates the density of that material in a certain region. Density…

Q: Determine the pressure in Pascal at a depth of 6m below the free surface of a lake. 2. What depth of…

Q: A reservoir with average surface spread of 4.8 km2 in the first week of October has the water…

Q: 1. A reservoir with a surface area of 300 ha had the following average values of parameters during…

Q: A: What will be the (a) gage pressure (b)absolute pressure of water, at depth 14m below surface. Use…

A: Given data, Atmospheric pressure P = 101 kN/m^2 Water density p = 1000 kg/m^3 Depth H = 14 m

Q: A tank used to collect rainwater having diameter of 4m .the depth of the tank varies linearly from…

A: Given Diameter of tank= 4m

Q: A vertical cylindrical tank with a diametr of 12m and a depth of 4m is filled with water to the top…

A: Diameter pf the tank = d = 12 Depth = h = 4m Temperature - T1 = 200C T2 = 500C Unit weight of…

Q: Determine the elevation difference, Ah, between the water levels in the two open tanks shown in the…

Q: A syphon of diameter 200 mm connects two reservoirs having a difference in elevation of 15 m. The…

A: Given- Diameter of syphon d=200 mm, Difference of elevation of two reservoirs=15 m, Total length of…

Q: 1.Express pressure of 225kPa (abs) as a gage pressure. The local atmospheric pressure is 101kPa.…

A: A normal force applied by a fluid over a unit area is defined as pressure. Pressure is a scalar…

Q: Find the depth of the water in the tank, H, and the manometer reading, h, if the hydrostatic force…

Concept explainers

Unit Conversion

Standard units are also called SI units. SI units are used for measuring a physical quantity satisfying certain conditions. There are two types of units: fundamental units and derived units. Fundamental units are physical quantities that are independent, that is, they do not depend on other quantities like mass, length, or time. There are plenty of quantities in our lives which need to be measured and compared. Measuring is the comparison of a particular physical quantity with its reference value. A unit is a measure of a fixed physical quantity. A physical quantity is the product of a unit and the numerical value we need to compare with.

Question

1. The water in a lake has an average temperature of 15°C. If the barometric pressure of the atmosphere is 720 mm of Hg (mercury), determine the gage pressure and the absolute
pressure at a water depth of 14m. Take pw-999.2 kg/m and pHe 13,550 kg/m2.
2. If the absolute pressure in a tank is 140 kPa, determine the pressure head in mm of mercury. The atmospheric pressure is 100 kPa and PHg-13,550 kg/m.
3. The soaking bin contains ethyl alcohol used for cleaning automobile parts. If the pressure in the enclosure is pe-0.5 psi, determine the pressure developed at point A and the height h
of the ethyl alcohol level in the bin. Take yen-49.3 lb/ft'.
1 ft
3 ft
B
6 ft
2 ft,

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Trending now

This is a popular solution!

Step by step

Solved in 6 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

The unit weight of a certain liquid is variable and is given by the relation γ = 8 + 0.2h, where γ is in kN/m3 and h is the depth of the liquid from the free surface in meter. Determine the gage pressure in kPa at a depth of 10 m.
A square object with an area of 4 m² is submerged vertically in water with the top surface of the object at a depth of 0.5 m from the free surface. What is the total water pressure (in kN) on the square surface? 0.5 cm 2m 2m
(Avoid truncation in the middle of solution thank you) The atmospheric pressure in a certain location was obtained to be 100 kPa Determine the gage pressure in kPa 2.0m below the surface of a body of liquid(specific gravity 1.50) in nearby lake 29.43 192.34 129. 93 92.43
A 1220 mm-diameter ISI pan, with a depth of 255 mm, was fully filled and was used to simulate the evaporation rate of a reservoir with a surface area of 230 hectares. After 24 hours, the depth of the water dropped 7 mm. What is the daily evaporation of the reservoir and the water evaporated from the reservoir for a month (1 month = 30 days).
Solve for the absolute pressure of oil at 10-m below its surface if the barometric reading is equivalent to 752 mmHg. Oil specific gravity = 0.75. An open tank has 5.8-m depth of water, on top of that layer is 3.2-m depth of kerosene which has a unit weight of 8 kN/m³. Solve for the pressure at the bottom of the tank. (Draw the figure).
ing Example: Pressure gage B is to measure the pressure at point A in a water flow. If the pressure at B is 9 t'm2 , estimate the pressure at A. ywater - 10 KN/m', yHg = 133.7 KN/m, yoil- 9 KN/m³ plution oil Scm It cm
Problem 3. (15pts) Complete the following questions by analyzing the Water Phase Diagram. a) Water is heated from its initial condition (7=60°C, P=0.8atm) under constant pressure to the water vapor equilibrium curve. Specify the temperature and pressure at that equilibrium point. b) Water is depressurized from its initial condition (7=60°C, P=0.8atm) under constant temperature to the water vapor equilibrium curve. Specify the temperature and pressure at that equilibrium point. c) You are boiling water near the top of Longs Peak (P=0.6atm). At what temperature of the liquid water will the water begin to boil? d) While boiling water on Longs Peak, is it possible to heat the liquid water to a temperature above your answer in part c)? Explain.
How long does it take to raise the water surface in the figure shown by 1.5 m? The left-hand surface is a large reservoir of constant water-surface elevation. - 6 m diam - 200 mm diam
A vacuum pump is used to drain a flooded mine shaft of 68 °F (20 °C) water. The vapor pressure at this temperature is 1.34 psi, incapable of lifting the water higher than 400 inches (10.16m). Compute the atmospheric pressure. 65°F = 0.01604 ft3/lbm 70°F = 0.01605 ft3 /lbm
Determine the value of pressure at depth of 1.23 m from top of water.
An open circular vessel is 1m in diameter and 2m height. It contains water filled to a depth of 1.5m. If the cylinder rotates about its vertical axis, what is the pressure intensity at the center of the bottom if w = 6 radians/second? Unit of the Correct Answer: kPa O 15.542 21.456 16.425 12.465
3.1 Calculate the pressure at a depth of 2000 m below sea water level. Take the density of the salty water 1002 kg/m³. Ans. 19.66 MPa