1. The total charge entering a terminal is given by q = 2e cos (6t), in uC. Determine the current at t= 0.25 s. 2. The resistance of a certain conductor , 300 mil diameter and 20 ft long is 200 x10^-3 0. Calculate its resistivity in micro-ohms-meter (uSN-m). 3. Determine the thermal coefficient of resistance of copper at 50°C, then use this value to determine the resistance of copper wire at 170°F if the resistance of this copper wire at 50°C is 50 N. The thermal coefficient of resistance of copper at 0°C is 0.004264/C°. 4. A battery has an EMF of 24.0 V and an internal resistance of 'r'. Its terminals are connected to a load resistance of 5.25 N. a. Find r and current in the circuit if the terminal voltage of the battery is 22.5V. b. Calculate the power delivered to the load resistor, the power delivered to the internal resistance, and the power delivered by the battery. 5. A 220V 600-watt electric coffee maker is used to make a total of 10 cups of coffee in 45 minutes. Determine the following : a. Current consumed by the coffee maker and the electrical energy consumed in kWh b. the rise in temperature of the device. Note: specific heat of water =4200 J/kg-K 1 cup = 236 grams

1. The total charge entering a terminal is given by q = 2e cos (6t), in uC. Determine the current at t= 0.25 s. 2. The resistance of a certain conductor , 300 mil diameter and 20 ft long is 200 x10^-3 0. Calculate its resistivity in micro-ohms-meter (uSN-m). 3. Determine the thermal coefficient of resistance of copper at 50°C, then use this value to determine the resistance of copper wire at 170°F if the resistance of this copper wire at 50°C is 50 N. The thermal coefficient of resistance of copper at 0°C is 0.004264/C°. 4. A battery has an EMF of 24.0 V and an internal resistance of 'r'. Its terminals are connected to a load resistance of 5.25 N. a. Find r and current in the circuit if the terminal voltage of the battery is 22.5V. b. Calculate the power delivered to the load resistor, the power delivered to the internal resistance, and the power delivered by the battery. 5. A 220V 600-watt electric coffee maker is used to make a total of 10 cups of coffee in 45 minutes. Determine the following : a. Current consumed by the coffee maker and the electrical energy consumed in kWh b. the rise in temperature of the device. Note: specific heat of water =4200 J/kg-K 1 cup = 236 grams

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

What is the resistance (in units of N) of a wire made of a material with a resistivity of 3.2 * 10-8 2. m, if its length is 73.4 m and its diameter is 0.50 mm? Select one: O A. 2.99 Ов. 11.96 OC. 4.62 D. 41.32 O E. 26.64
_1. If wire has 1.25 x 1016 electrons flowing through its cross-section in one second, what is the current in the wire. 2. How much current is flowing when 15 C pass a specified point in 5 s? 3. An electric motor winding uses 180 m of copper conductor with a cross-sectional area of 0.26 cm2. Find the resistance of the electric winding at 20°C. The resistivity of copper is 1.72 x 10-8 Q-m. 4. What is the resistance of a lamp which allows 0.8 A current when 110.0 V is applied to it? 5. The heating element in a clothes dryer is rated at 5 Kw and 220 V. How much current does it draw? 6. A potential difference of 9 V is maintained across a conductor in a circuit. If the conductor has a resistance of 10 ohms, how many electrons flow through the conductor's cross-section in 5 seconds? 7. A piece of material with a square cross-section measuring 1 mm on each side has a length of 1 m. What is the resistance of this material if it were made of aluminium? Fused quartz? Finally, calculate the…
4. A conductor of radius r, length and resistivity phas resistance R. It is melted down and formed into a new conductor, also cylindrical, with one fourth the length of the original conductor. Find the resistance of the new conductor.
1.How much energy does a 100-W electric bulb consume in two hours? 2.A stove element draws 15 A when connected to a 240-V line. How long does it take to consume 60 kJ? 3. The resistance of a copper wire at 30°C is 50 ohms. If the temperature coefficient of a copper at 0°C is 0.00427, What is the resistance at 100°C? 4.The resistance of a wire is 126.48 ohms at 100°C and 100 ohms at 30°C. Determine the temperature coefficient of copper at 0DC. .004270
1. Conductor Resistance: A copper wire with a length of 5 meters and a cross-sectional area of 3 × 10-6 m² has a resistivity of 1.68 × 10-8 Nm. Calculate the resistance of the copper wire. 2. Resistor Temperature Dependence: The resistance of a tungsten filament in an incandescent light bulb is 50 ohms at room temperature. If the temperature of the filament increases, and its resistance becomes 75 ohms, calculate the percentage increase in resistance. 3. Material Comparison: Two wires, one made of aluminum and the other of copper, have the same length and cross-sectional area. If the resistivity of aluminum is 2.82 × 10−8 N · m and the resistivity of copper is 1.68 × 10-8 N · m, compare the resistance of the two wires.
3. For carbon; P20°c = 3.5 x 10-50-m and a = -5.0 x 10-4/°C. a) At what temperature does a carbon resistor have a resistance of 995 02, if it has resistance of 1000 at 20°C? Assume negligible thermal expansion/contraction. b) What is the conductivity of carbon at the new temperature? c) How does a negative temperature coefficient of resistivity affect the conductivity of a material?
1. A certain geophysical technique determines the electrical resistivity of the ground by measuring the voltage, V, and current, I, between electrodes separated by a distance, a. These measurements are related to resistivity by the equation, resistivity = 2za (VI). 1.00 +0.01 meters, what If V = 0.512 +0.01 volts, I–0.00684 ± 0.0001 Amps, and a = is the uncertainty in the resistivity. (Note: The units of resistivity are ohm-meters. The numbers in this problem are given in such a way that no unit conversions are necessary.)
9
An aluminum rod has a resistance of 1.585 2 at 23.0°C. Calculate the resistance of the rod at 136.00°C by accounting for the changes in both the resistivity and the dimensions of the rod. Round your answer to the nearest thousandth and write it in the answer section. For aluminum: Temperature resistance coeff. ¤f = 3.90 X 10-3 °C-1, length expansion coeff. a = 24.0 X 10-6 °C-1.
3. Resistance. A copperwire is 2.50 m long and has a diameter of 2.5 mm. How much current will it draw when connected to a 3.0 V source? Hint: Solve first for the value of the area of copperwire, then solve the resistance thru the equation: R = p÷. Use Ohm's law to get the value of the current.
1. Calculate the expected resistance of a circular aluminum cable of diameter 5 mm and length 835 m. Take the resistivity of aluminum to be 2.4 x 108 Q m.
moodle.nct.edu.om/m arning Portal Courses Reports e-Services - Academic Departments ETC CIMS - äö pio Moving Forward purses / PHYS1100 / Homework No.2/ Homework No.2 An iron wire has a diameter 3.05 mm and resistivity 9.71x 10-8 Qm. What will be the length of this wire to make a resistance of 302. What will be the new resistance, if the radius is doubled? (a) Length of the wire (in m) = (b) Resistance of the wire (in )N = Next page Upload your Homework 2 Answer - Jump to.. pad - Quiz-2 OneDrive CH6VZR403C NG 4) G E DELL