1. The elbow-nozzle combination is located in the horizontal plane and is supported by 4 bolts connected to a flange. The internal volume of the nozzle is 3 ft³. Determine the total force on the bolts. 3-in. ID nozzle 11/ Long pipe supported further down the line Q = 2.0 ft³/s Patm = 14.7 psia 60° Water 15 6-in. ID line

1. The elbow-nozzle combination is located in the horizontal plane and is supported by 4 bolts connected to a flange. The internal volume of the nozzle is 3 ft³. Determine the total force on the bolts. 3-in. ID nozzle 11/ Long pipe supported further down the line Q = 2.0 ft³/s Patm = 14.7 psia 60° Water 15 6-in. ID line

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Q4) Water at 20 °C flow through the 20-mm- diameter galvanized iron pipe (ε = 0.15 mm) such that it discharges at C from the fully opened m³ Determine the gate valve B at 0.003 required pressure at A. Include the miner losses of four elbows and one gate valve. 3 m Im m 0.5 m (K=0.2) B I m 1 m Threaded 90° elbows (K=0.9) 20 mm
*6-8. The nozzle has a diameter of 40 mm. If it discharges water with a velocity of 20 m/s against the fixed blade, determine the force exerted by the water on the blade. The blade divides the water evenly in the vertical plane at an angle of 0 = 45°. 40 mm B
A horizontal reducer carries water (10°C). The pressure before the reducer is 120 kPa, and after the reducer, it is 100 kPa. The velocity before the reducer is 1.2 m/s. a.) Determine the head loss due to friction in the reducer. b.) Determine the net force acting on the reducer. -$450mm Ø200mm
Fluiid mechanicx. hydraulics
- Probl Water flows from a large open tank, through a valve and out a pipe to atmosphere. A-9 cm². Az = 11m. h₁ = 5V²/2g Find: I Discharge (Q=?) in pipe. Assumptions: a = 1.
i need the answer quickly
Name: Class: ......... Assignment No. 3 Q4- A rectangular gate 6 ft tall and 5 ft wide in the side of an open tank is held in place by the force F as indicated in Figure. The weight of the gate is negligible, and the hinge at O is frictionless. (a) Determine the water depth, h, if the resultant hydrostatic force of the water acts 2.5 ft above the bottom of the gate, i.e., it is collinear with the applied force F. (b) For the depth of part (a), determine the magnitude of the resultant hydrostatic force. (c) Determine the force that the hinge puts on the gate under the above conditions. Water Hinge O Gate 6 ft 2.5ft Name: Class: Assignment No. 3
Water is flowing steadily in a horizontal elbow and nozzle combination shown in the figure. The gage pressure at section (1) is 100 kPa with inlet velocity of 2 m/s. At section (2) the water exits to the atmosphere. Neglecting pipe weight, determine the magnitude and direction of the x and y components reaction forces exerted on the flanges to withstand this flow. 160 mm y section (2) 300 mm V1 -> section (1) P, = 100kPa V, = 2m/s
Q4) Water at 20 °C flow through the 20-mm- diameter galvanized iron pipe (ε = 0.15 mm) such that it discharges at C from the fully opened m³ Determine the gate valve B at 0.003 required pressure at A. Include the miner losses of four elbows and one gate valve. 3 m Im m 0.5 m (K=0.2) B I m 1 m Threaded 90° elbows (K=0.9) 20 mm