Question 16 Rk .Full explain this question and text typing work only We should answer our question within 2 hours takes more time then we will reduce Rating Dont ignore this line 1.(a)(b)(c)Consider two hosts A and B, connected by a single link of rate R bps.Suppose that the two hosts are separated by m meters, and thepropagation speed along the link is s meters/sec. Host A is to send apacket of size L bits to Host B.Show Transcribed Text5. Suppose dprop is greater than dtrans. At time t = dtrans, where is the firstbit of the packet?The bit is just leaving Host AO The bit is in the link and has not reached Host BO The bit has reached Host BShow Transcribed TextThe bit is just leaving Host AS6. Suppose dprop is less than dtrans. At time t = dtrans, where is the first bitof the packet?The bit has reached Host BThe bit is in the link and has not reached Host BShow Transcribed TextĆShow Transcribed Text37. Suppose s = 2.5×108, L = 120 bits, and R = 56 kbps. What is thedistance m so that dprop equals dtrans (assuming unit is km, round up to aninteger answer)?

NOTE: The question is missing and also the options for number 1. 1. Given, Bandwidth(B)=R bps…

1. (a) Consider two hosts A and B, connected by a single link of rate R bps. Suppose that the two hosts are separated by m meters, and the propagation speed along the link is s meters/sec. Host A is to send a packet of size L bits to Host B. Show Transcribed Text

1. (a) Consider two hosts A and B, connected by a single link of rate R bps. Suppose that the two hosts are separated by m meters, and the propagation speed along the link is s meters/sec. Host A is to send a packet of size L bits to Host B. Show Transcribed Text

Operations Research : Applications and Algorithms

4th Edition

ISBN:9780534380588

Author:Wayne L. Winston

Publisher:Wayne L. Winston

Chapter20: Queuing Theory

Section20.10: Exponential Queues In Series And Open Queuing Networks

Problem 8P

See similar textbooks

Similar questions

Frames of 1000 bits are sent over a 106 bps duplex link between two hosts. The propagation time is 25 ms. Frames are to be transmitted into this link to maximally pack them in transit (within the link). 1.1 What is the minimum number of bits (1) that will be required to represent the sequence numbers distinctly? Assume that no time gap needs to be given between transmission of two frames.
Consider the following scenario: Frames of 12000 bits are sent over a 400kbps channel using a satellite whose propagation delay is 270ms. Acknowledgements are always piggybacked onto data frames. (That is, in the case of stop-and-wait, the next frame cannot be transmitted until the entire frame containing the acknowledgement is received.) Five-bit sequence numbers are used. What is the maximum achievable channel utilization for (a) Stop-and-wait. (b) Protocol 5 (i.e., Go Back N). (c) Protocol 6 (i.e., Selective Repeat)
Computer Science
Consider two hosts S and R connected directly by a link. A link has a transmission speed of 107 bits/sec. It uses data packets of size 400 bytes. Data needed to transmitted is 400 bytes. Length of the link is 600 km and the propagation speed are 3 × 108 meter per second. T is the transmission delay and P is the propagation delay. The propagation delay in millisecond and transmission delay in microsecond respectively are
Suppose that a SW ARQ system with 1-bit sequence numbering has a time-out value that is less than the time required to receive an ACK. Station A sends 5 frames to station B. No errors occur during transmission of all 5 frames. One ACK is lost when it is transmitted the first time (see the following table), and no transmission of that ACK. No errors occur during transmission of the other 4 ACKS. Sketch the sequence of frame exchanges that transpire between stations A and B. (а) error occurs in re- Last digit of your student ID number 0, 1 2, 3 Lost ACK 1 4, 5 6, 7 8, 9 2 3 4
We have a 1000 m long 10 Mbps communication channel with ARQ protocol. The signal travels at a speed of 2 ∗ 10 ^ 8 ? / ?Assume that no frame is lost or damaged. Confirmation frames, control information are negligible in size.For what range of frame sizes do we get an efficiency of at least 70%?
(a) Suppose a server S and client C are connected over the Internet. The one-way prop- agation delay from S to C is 50 ms. The maximum throughput between S and C is R = 200 Mbps. A browser on client C makes an HTTP request for a webpage on server S. The base HTML file is of size 500 KB and it references five objects, each of size 5 MB. Find the total response time for the client to receive the entire webpage using nonpersistent HTTP with up to two parallel connections. Assume that when two par- allel connections are active, the throughput for each connection is 40% of the maximum throughput R. (b) Suppose an application running on host ece.gmu.edu needs to resolve the domain name cs.vtech.edu. Draw a diagram (with labels) showing the sequence of queries/responses in a recursive DNS query to find the answer in a scenario where all levels of the DNS hierarchy are involved.
Computer A is sending a 100 kByte long file to Computer B via packet-switching over two consecutive 10 Mbps links of 1000 km length each.Assume that the signal propagation speed on both links is 2.5 x 108 m/s.Furthermore, assume that the maximum length of a packet is 1500 bytes and that Computer A fills each packet to the max, if possible. How "long" (in meters) is one bit on link 1?
Thank you in advance. Solve
Computer A is sending a 100 kByte long file to Computer B via packet-switching over two consecutive 10 Mbps links of 1000 km length each.Assume that the signal propagation speed on both links is 2.5 x 108 m/s.Furthermore, assume that the maximum length of a packet is 1500 bytes and that Computer A fills each packet to the max, if possible. If transmission starts at time t=0, at which time (in seconds) does the first bit arrive at the switch connecting link 1 and link 2?
Computer A uses the Go-back-N ARQ protocol to send a 110 Mbytes file to computer B with a window size of 15. Given each frame carries 100K bytes data. How long does it take to send the whole file (the total time taken from A sending the first bit of the file until A receiving the last acknowledgment)? Given that the transmission rate of the link is 500 Mbps and the propagation time between A and B is 15ms. Assume no data or control frame is lost or damaged and ignore the overhead due to header and trailer.
a) Consider a CSMA/CD network running at 20 Mb/s over 3-km cable with no repeaters. The signal speed in the cable is 2×108 m/s. Suppose station A starts transmitting a frame of size 400 bytes at time T. i. Can it happen that station A detects a collision at time T+10 us (micro seconds) if there was no collision detected between time T and T+10 μs? Justify your answer. Can it happen that the station detects a collision at time T+20 μs, if there was no collision detected between time T and T+20 us? Justify your answer. iii. Can it happen that the station detects a collision at time T+33 μs, if there was no collision detected between time T and T+33 us?? Justify your answer.