119-21119-₁2112"-6"-119-21.CIW2x35C2M12x35M12x35W2x35M12x35M12x35W12x3525'-0"Steel Framing Plan0.9Column1583W2x728'-0" M235C12:301°C3M2x72M12x35C202210W12x35M12x35W12x3525'-0".SizeW8 X 28W12 X 40W12 X 53C2W2x72C3M2x72C2FlangeWidth (in)6.5358.0059.995W12:35M12x35W12:35M12x35~M12x35-25'-0".Depth (in)8.0611.9412.062CIW12x35W12:35 1) For the framing plan distributed in class prepare a structural steel materials list.a. Columns are 20 feet highb. Flange width for the W 12X35 is 6.5 inchesc. Flange width for the W 12X72 is 12 inchesd. Column properties are in the table below the plan.

Given Data : Height of the columns =20 ft Flange width for W12×35 = 6.5 inches Flange width for…

1) For the framing plan distributed in class prepare a structural steel materials list. a. Columns are 20 feet high b. Flange width for the W 12X35 is 6.5 inches c. Flange width for the W 12X72 is 12 inches d. Column properties are in the table below the plan.

1) For the framing plan distributed in class prepare a structural steel materials list. a. Columns are 20 feet high b. Flange width for the W 12X35 is 6.5 inches c. Flange width for the W 12X72 is 12 inches d. Column properties are in the table below the plan.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Give and discuss some of the significant and unique features related to steel construction of this…

A: The Beijing National Stadium, which is located to the south of the Olympic Green and cost £300…

Q: teel and concrete weighs 150 pcf and the deflection of the form is limited to 1/8 inch s. There are…

A: Given:-width = 18 inchtotal depth = 24inchesweight=150 pcf8 beamsdeflection is limited to 1/8 inchTo…

Q: Determine the volume of concrete of Girder G3 from gridline A/2-3 if there are 18 identical spans in…

Q: What is the standard length of a steel reinforcement bar? Select one: a. 50 mm O b. 12 m C. 6 mm o…

A: The correct answer is 12 m. And explation is as follow:

Q: a. Calculate the average weight of the floor, including the weight of slab, beams and non-structural…

A: Given: Density of concrete = 150 pcf Beam size = 7' wide x 20'' deep Slab thickness = 14'' thick To…

Q: Introduction Concrete encased steel composite beam

A: Introduction- A typical type of composite structure is a concrete-encased composite structure, which…

Q: What are the commonly used framing members used in light frame construction?

A: The commonly used framing methods in wood light-frame construction are platform framing and balloon…

Q: Consider a single 4.0-meter span length concrete slab to be supported by both sides with the RC beam…

Q: Answer the table below. The truss illustration and instruction is also below

A: Step 1: Step 2:Step 3:Step 4:

Q: steel reinforcing bar is stretched until it breaks

A: To calculate the minimum elongation at which the bar will break for steel bars of varied grades.…

Q: How are light gauge steel framing members manufactured?

A: The light-gauge steel framing members are manufactured with the help of framing accessories, the…

Q: Why does an I-Joist manufacturer perform MOE (modulus of elasticity) tests?

A: To form the I-joist, both the flanges and the web are joined together to form an I-shaped…

Q: Explain the purpose of each part of the AISI steel designation code?

A: AISI steel designation code:

Q: Thursday Nov.24, 2020 1. Compute the design strength in tension, Pn, of the ASTM A572 Gr. 50…

A: Compute the design strength in tension, Pn, of the ASTM A572 Gr. 50 L6X4X3/4 angle. You can assume…

Q: What area of steel is provided (per ft width) for No 6 @ 9"o.c.? O 0.66 in² O 0.88 in² O 0.59 in² O…

A: In the given question rebar number is given as 6 and 9" bar spacing Use the table and find area in…

Q: TABLE 8.5 Allowable Spans in Feet and Inches for Low-Slope Raftera, Slope 3 in 12 or Less (No…

A: Given Data, Span of 24 ft if rafters are 16 in. on center and the wood grade is Douglas fir-larch,…

Q: Find the axial forces at CG, DH, GH, BC, and BG in the truss shown below: 2m 2m 2m 2m C B D 1m E 1m…

Q: Sketch without calculation the BMD and deformed shape for the following beams.

A: The BMD and deformed shape for the beams are shown below.

Q: 4. Doors Lite is called rail door? 5. Composite beams are constructed from steel and timber? 6. The…

A: The given question contains 7 parts which are true of false type questions.

Q: Describe fire-protection procedures for structural steel members required by building codes?

A: The fire-protection procedures for structural steel members required by building codes are:

Q: 6. Based on the following figure, explain how the steel decking is built.

A: question given related to the steel deckfig also given let's discuss the how steel decking is built

Q: The cabinet door in the image is most likely made of ... O a. LDF O b. Massive timber O c. Plywood O…

A: MDF stands for Medium Density Fiberboard. It is a type of engineered wood product made by combining…

Q: 2. For a specific beam cross-section, the required reinforcement is analyzed as A, = 3.0 in.² and fy…

A: As = 3 in2fy = 80000 psi

Q: Write short notes on the following Distinguish between tied, spiral and composite columns What is…

A: The column is defined as the compression member designed to carry the compressive loads over it. The…

Q: Find the axial forces at CG, DH, GH, BC, and BG in the truss shown below:

Q: Yト 2" ×小

A: Given data Composite member Dimensions To find Centroid

Q: TABLE 82 Allowable Spans in Feet and Inches for Ceiling Joists (Drywall Cellingr Modulus of…

A: This timber is one of the greatest building materials on the market today since it is strong and…

Q: QUESTION 3 If you use computer program to analyze your reinforced concrete structure, the…

A: Deformed reinforcement in frame members sustaining earthquake-induced flexural and axial stresses…

Q: What are the main two differences between a pre-tensioning system and an unbonded post- tensioning…

A: In pre-tensioning system, the tendons are pre-stressed before the concrete is poured or hardened.…

Q: appendix to find the weight of

A: Find the weight of the post (W beam), use 16lbs per ft Wbeam=16×8'-4''Wbeam=16×813'Wbeam=133.333 lb

Q: Define Structural Loads Bearing Beams.

A: Structural Loads Bearing Beams are:

Q: STRENGTH OF MATERIALS PLEASE WRITE THE SOLUTIONS LEGIBLY AND USE 4 DECIMAL PLACES. RATE WILL BE…

A: Hi! Thank you for the question, As per the honor code, we are allowed to answer three sub-parts at a…

Q: List standard types sizes of pre-cast concrete columns,beams, girders, and wall panels?

A: Pre-cast Concrete Columns: Typical Shape: Square or Rectangle. Typical Sizes: 12 in x 12 in , 24 in…

Q: Stone Cladding on Steel Trusses.

A: Solution: Stone cladding is basically defined as the the sheets of stone that are generally combined…

Q: (4) 3" L 14" 3" 4" 4#9 21" fo=3 ksi Nwc Grade 60 &Mn = ? steel

Q: what is the nominal maximum load capacity of a grade 60 reinforcing bar with a diameter of 20 mm?

Q: Please draw a cross-section sketch and a plan view sketch showing the location and arrangement of…

A: - Span: 11 feet - Dead load: 20 psf - Live load: 100 psf - Self-weight: 87.5 lb/ft2 - Concrete…

Q: 3. Draw the connection of a 150 mm Ølally column with a 50 mm x 75 mm purlin on top of a 50 mm x 100…

A: Diameter of the column - 150 mm purlin size- 50size of wood rafter - 50diameter of reinforcing…

Q: Describe the applications, limitations and appropriateness of each method. Portal…

A: The applications, limitations and appropriateness of Portal Method- One of the often used…

Q: 3. A W-shape supports a floor made of concrete on metal deck. The floor supports construction and…

A: Given,UDL Dead Load = 25 kN/mLive Load = 80 kN/mMaterial of beam = G40.21-350WSpan of beam (L) = 6.5…

Q: Describe each of the structural steel designations listed below: a. W 14 x 82 b. MC 12 x 45…

A: All the structural steel designations are as per American Codes a. W 14 x 82 Answer:- The structural…

Q: Q: Identify the steel grades specified for each structural steel standard (ex: ASTM A36, ASTM A992)

A: Here are the common steel grades specified by some common structural steel standards: ASTM A36:…

Q: A two span beam subjected to shear and flexure only is reinforced as follows: @ FACE OF SUPPORTS…

Q: 1. What thickness limit classifies metal as being sheet? 2 What is the decimal size of 14 AWG sheet?…

A: Note:- Hi! Thank you for the question, As per the honor code, we are allowed to answer three…

Q: Q#3: Design Rcc slab for an Isolated Living room resting on masonry walls with following data:…

A: Design RCC Slab for an isolated living room resting on masonry walls with following data: room size…

Q: Problem 1: Calculate Mn and check the minimum steel limit f'c =4 ksi, fy = 60 ksi. 2.5" 25" 6-#9…

A: Given doubly reinforced beam with values,Width of the beam, b= 12''Effective depth,…

Q: -1. Determine whether the W14 x 34 beam shown in Figure 11-43 is adequate for flexural rupture and…

A: Beam size: W 14 x 34Steel grade: 50 (ASTM A992)To find:Check the adequacy against flexural rupture…

Q: What factors do you consider when designing a tension member in a steel structure?

A: Tension members are structural elements that are subjected to direct axial tensile loads which tend…

Concept explainers

Steel Framing

A steel frame consists of a skeleton frame structure comprising of horizontal I-beams and vertical steel columns fitted in a rectangular grid building construction to brace the floors, walls, and the roof of the building held onto the frame. Due to the implementation of this methodology, the construction of the skyscrapers was feasible.

Question

119-21119-₁21
12"-6"-
119-21.
CI
W2x35
C2
M12x35
M12x35
W2x35
M12x35
M12x35
W12x35
25'-0"
Steel Framing Plan
0.9
Column
1583
W2x72
8'-0" M235
C12:30
1°C3
M2x72
M12x35
C2
02210
W12x35
M12x35
W12x35
25'-0".
Size
W8 X 28
W12 X 40
W12 X 53
C2
W2x72
C3
M2x72
C2
Flange
Width (in)
6.535
8.005
9.995
W12:35
M12x35
W12:35
M12x35
~
M12x35
-25'-0".
Depth (in)
8.06
11.94
12.06
2
CI
W12x35
W12:35

1) For the framing plan distributed in class prepare a structural steel materials list.
a. Columns are 20 feet high
b. Flange width for the W 12X35 is 6.5 inches
c. Flange width for the W 12X72 is 12 inches
d. Column properties are in the table below the plan.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Draw a free-body-diagram showing the loads on girder G1 in the floor plan shown below. The floor supports 40 psf. Show process work
As a consultant, explain the required steps to give approval for casting the beam regarding to the following items:(i) framework(ii) main steel reinforcement(iii) secondary steel reinforcement
The following diagram shows a partial floor framing plan of an elevated walkway building connecting an airport terminal building to the adjacent garage. The concrete floor is not post- tensioned. Material properties are: - Concrete weight: wt = 150 pcf - Concrete compressive strength: f'c = 4000 psi - Steel tensile strength: fy = 60 ksi - Stirrup consists of #4 bar - Framing members are not exposed to weather or in contact with soil. Use ASCE Table 4.1 to determine the design live load for this floor. 30-0¹ S Colm- Ö 90-0 - Mark 54 59 25 30-0¹ N BI -Sinder ASCE 7-10 Chapter 4 Live Load.pdf 50 psf 60 psf 100 psf 150 psf 2
11-1. Determine whether the W14 x 34 beam shown in Figure 11-43 is adequate for flexural rupture and flexural yielding at the cope. The steel is ASTM A992, grade 50. 1/2" W14x34 R₁ = 40kips FIGURE 11-43 Detail for Exercise 11-1
As a design engineer you are asked to peer review the design done by another engineer at your organization. A typical reinforced concrete floor slab plan is given. Assume all members to be simply supported. The specified compressive strength of concrete is 5000 psi and Grade-60 steel is used. Unit weight of concrete can be assumed as 150 lb/ft³. B 30'-0"- B2 -EQ.- EQ. -EQ. SEC 1 -40'-0" IS B1 B3 B3 B1 2 The only dead load acting on the slab is the self-weight of the members. The live load on the slab is 100 psf. Initial cross-section and reinforcement details of beam B1 is shown. Area of steel is 4.8in². EQ. 40'-0" B EQ. North
Specify structural and high strength bolts. Draw a typical sketch of a high strength bolt and label it.
Using the principles of zero force member, determine which members are zero force members? Assume all joints are equally spaced horizontally and vertically. [Must show work to receive partial credit] P1 ct B E H F J K L P2
Describe the gross toe bearing resistance.
List all the Structural Steel Standards and Identify the steel grades specified for each standard.
From Steel Design Topic Include complete solution
9.21 - 12"-6" - ----12-6⁰⁰- (2 CI M235 M235 M235 M235 W1235 -25'-0". Steel Framing Plan lovet 1 Foot M235 T C2 Column C1 C2 C3 C1230 1.c3 M235 C2 W1255 W205 W12:35 -25'-0" Size W8 X 28 W12 X 40 W12 X 53 C2 F CS C2 M255 6.535 8.005 9.995 W205 M235 M235 W205 25-0" Flange Width (in) Depth (in) 8.06 11.94 12.06 F a (2 H CI
Show 5 failures. Show step by step solution. Steel Type: Cross section flat bar PL 12.7 x 165 with an area of 2095.5 mm2 Textbook reference Handbook of steel construction.