1 A gasoline engine working on four stroke develops a brake power of 20.9 kW. A Morse Test was conducted on this engine and the brake power (kW) obtained when each cylinder was made inoperative by short cir- cuiting the spark plug are 14.9, 14.3, 14.8 and 14.5 respectively. The test was conducted at constant speed. Find the indicated power, me- chanical efficiency and bmep when all the cylinders are firing. The bore of the engine is 75 mm and the stroke is 90 mm. The engine is running at 3000 rpm.

1 A gasoline engine working on four stroke develops a brake power of 20.9 kW. A Morse Test was conducted on this engine and the brake power (kW) obtained when each cylinder was made inoperative by short cir- cuiting the spark plug are 14.9, 14.3, 14.8 and 14.5 respectively. The test was conducted at constant speed. Find the indicated power, me- chanical efficiency and bmep when all the cylinders are firing. The bore of the engine is 75 mm and the stroke is 90 mm. The engine is running at 3000 rpm.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A four-stroke SI engine 0.08 m bore (d), 0.10 m stroke (L), is tested at full throttle at constant speed. The fuel supply (m; ) is fixed at 0.0011333 kg/s and the spark plugs of the four cylinders are successively short circuited without change of speed, brake torque (4) being correspondingly adjusted. The brake power (bp) measurements are the following: With all cylinders firing With cylinder No. 1 cut off With cylinder No. 2 cut off With cylinder No. 3 cut off With cylinder No. 2 cut off = 9.1 kW 12.5 kW 9 kW 9.15 kW 9.2 kW The lower calorific (or heating value, LCV) of the fuel is 44100 kJ/kg. The clearance volume (Va) of one cylinder 70.0x10³ mm³. Determine: (a) Indicated power (ip) of the engine under these conditions. (b) The indicated thermal efficiency (Nind, th). (c) The relative efficiency (7el) of this engine.
Describe a 4-stroke compression ignition engine operation with neat sketches.
A power generator with two-cylinder, four-stroke gas engine has a bore of480 mm and a stroke of 585 mm. At 300 rev/min the torque developed is10 kNm. The generator is supplied with a mixture of gas and air in theproportion of 1 to 8 by volume. The estimated volumetric efficiency is 80% and the net calorific values of the fuel is 48.6 MJ/m3 Calculate:1 The brake power in kW2 the mean piston speed in m/s3 the break mean effective pressure in bar
A six-cylinder two-stroke automotive engine has been designed to provide a maximum brake torque of (3.30x10^2) Nm at rated engine speed of (5.000x10^3) rpm. The engine specifications are listed below: Bore and stroke (mm): (8.4000x10^1) x (9.2000x10^1) Compression ratio: 11.0: 1 Find its brake mean effective pressure (bmep). The answer should be in kPa with three significant figures. Note: Your answer is assumed to be reduced to the highest power possible. Your Answer: x10 Answer
Discuss briefly as points the importance of Octane Number on the combustion process and engine performance for SI Engine
ENGINE SPECIFICATIONS: Engine Type : Four cylinder Four stroke Diesel engine, Bore: 0.073m, Stroke: 0.0889m Capacity: 1489cc, Power: 36 H.P. at 4000 rpm, Torque : 8.5 kg.m at 2250 rpm and Compression Ratio :17.3:1 Explain how to measure the :- (i) Fuel consumption. (ii) (iii) Manometer readings for air flow. RPM, power output etc. Study of various components of diesel engine.
Regarding the over-all engine performance, the following measures of performance will have comparative significance with accordance to the reliability, durability, and maintenance. I. At maximum rating points: II. At all speeds at which the engine will be used with full throttle (control) or with maximum fuel-pump setting. III. At all useful systems of operation and particularly in those in which the engine is run for long periods of time. Explain each of the above factor in detail.
OCTOBER 021 Q1 The following results were objained during a test on a two-cylinder, ur-atroke cycle, oil engine over a period of one hour Cylinder diameter, 108 mm. Pistop stroke, 135 mm Speed, 16 5rev/ Brake torgue, 90 Nm Fuel consumption, 2:5kg. Calorific value of fuel, 45 500 k/kg Mechanical efficiency, 82%. The exhaust gases, on leaving the cylinders were passed through an cahaust gas calorimeter and raised the temperature of 215kg oỆ waler from Determine, (n) the brake thermal efficicncy, 1b) the percemtage of the energy supplied by the fuel whch is carried away by the cocling water, Inction and radistion. () the indicated mean effective pressure, d) the indicated specific fuel consumplion
QUESION 1Kindly answer correctly. Please show the necessary steps. Thanks in advance.
5- Match List I (performance parameter) with List II (performance curves, labelled A, B, C and D. for a constant speed diesel engine) and select the correct answer. List I 1. Smoke level 2. Brake specifice fuel consumption. 3. Bráke thermal efficiency 4. Brake power List II Codes: A B CD 3 41 2 (a) (b) (c) (d) 3 421 % Load 100 4312 4 321
Please solve the question quickly
5. Calculate the brake thermal efficiency of a supercharged 4-cylinder, four stroke cycle Diesel engine with a bore and stroke of 3.94" x 5.91". The compression ratio is 14. Using a brake torque analysis, the dynamometer reads a scale of 143.3 pounds with 13.8 arm at 440 rpm. For a period of 14 minutes of test, 1.433 pounds of fuel with 40,702 KJ/kg heating value are completely burned with air with fuel-air ratio of 0.07 a.) 31.8% b.) 34.1% c.) 32.7% d.) 33.5%