New question 4

please help solve A-F. thank you You are an engineer working on a project and your prototype has failed prematurely. You question whether or not a key component of the prototype was manufactured with the correct material. There are two way to check for the material properties. The first way is to have a material certification done to confirm the exact material composition. This will take some time. The second method to confirm the material properties is to make an ASTM test sample and test for the material properties. This tensile test was completed on a test sample with an initial diameter of .501” and an initial length of 2”. The Load-Deflection data for this tensile test is below. Use this data to answer the first set of questions on the Final Exam in eLearning. A. Determine the Ultimate Tensile Strength B. Determine the 0.2% Offset Yield Strength C. Determine the value of the Proportional Limit D. Determine the Modulus of Elasticity E. Determine the Strain at Yield F. Calculate %…

heck my work mode : This shows what is correct or incorrect for the work you have completed so far. It does not indicate completion. Return to question Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. The loading for a beam is as shown in the figure, where F1= 19 lb, F2= 20 lb, F3= 35 lb, F4= 2O Ib, and F5 = 15 lb. F1 F2 F3 F4 F5 O B 6 in 8 in.-8 in. -6 in.- Determine the reaction at A. (You must provide an answer before moving to the next part.) The reaction at A is 76 c 8 Ib raw ill 10:45 PM ENG 69°F Mostly cloudy 10/6/2021 pe here to search 近

15 please answer the problems, the answer is already given i just need the solution   please type your answer if you can because i can't view written answers

I need parts 8, 9, and 10 answered. Number 1 is an example of how it should be answered. NOTE: Read the instructions, no where does it say any drawing is required. It is really frustrating when I wait all this time for an answer to a question and some tutor does even read the instructions and just declines it...its ridicilous.

I need answers to questions 1, 2, and 3 pertaining to the print provided. Note: A tutor keeps putting 1 question into 3 parts and wasted so many of my questions. Never had a issue before until now, please allow a different tutor to answer because I was told I am allowed 3 of these questions.

Do not give answer in image and hand writing

I need problems 6 and 7 solved.  I got it solved on 2 different occasions and it is not worded correctly. NOTE: Problem 1 is an example of how it should be answered. Below are 2 seperate links to same question asked and once again it was not answered correctly. 1. https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/cadc3f7b-2c2f-4471-842b-5a84bf505857 2. https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/bd5390f0-3eb6-41ff-81e2-8675809dfab1

J 6

Help!!! Answer all parts correctly!! Please

MULTIPLE CHOICE -The answer is one of the options below please solve carefully and circle the correct option Please write clear .

Don't use chatgpt will upvote

I need answers for problems 13, 14, and 15 pertaining to the print provided.   NOTE: If you refuse to answers all 3 parts and insist on wasting my question by breaking down 1 simple question into 3 parts, then just leave it for someone else to answer. Thank you.

I need parts 1, 2, and 3 answered pertaining to the print provided. NOTE: If you refuse to answers all 3 parts and insist on wasting my question, then just leave it for someone else to answer. I've never had an issue until recently one single tutor just refuses to even read the instructions of the question and just denies it for a false reasons or drags on 1 part into multiple parts for no reason.

I need problems 4, 5, and 6 answered.

I need answers to questions 7, 8, and 9 pertaining to the print provided. Note: A tutor keeps putting 1 question into 3 parts and wasted so many of my questions. Never had a issue before until now, please allow a different tutor to answer because I was told I am allowed 3 of these questions.

Save ck my work mode : This shows what is correct or incorrect for the work you have completed so far. It does not indicate comple Help Retu. Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. The loading for a beam is as shown in the figure, where F1= 19 lb, F2= 20 lb, F3735 lb, F4= 20 lb, and F5 = 15 lb. F1 F2 F3 F4 F5 -6 in 8 in.-8 in. 6 in.- Determine the tension in cable BC. 185 X lb. The tension in cable BC is of 13 Next > < Prev 3 10 ENG

I pay for professionals monthly to help with my homework questions and every question I’ve asked for the last two weeks have been rejected. Honestly just trying to psd this class so I can retake after I learn the basics. This is supposed to be introduction to engineering and it’s definitely exceeding introduction. Could I please get some assistance drawing this problem?

This is an engineering problem and not a writing assignment. Please Do Not Reject. I had other engineering tutors on bartleby help me with problems similar to this one. This problem must be presented in a logical order showing the necessary steps used to arrive at an answer. Each homework problem should have the following items unless otherwise stated in the problem: a. Known: State briefly what is known about the problem. b. Schematic: Draw a schematic of the physical system or control volume. c. Assumptions: List all necessary assumptions used to complete the problem. d. Properties: Identify the source of property values not given to you in the problem. Most sources will be from a table in the textbook (i.e. Table A-4). e. Find: State what must be found. f. Analysis: Start your analysis with any necessary equations. Develop your analysis as completely as possible before inserting values and performing the calculations. Draw a box around your answers and include units and follow an…

I have two parts that need to be answered (Multiple Choice). If you can not answer both parts, please leave it for another tutor to answer. Thank you.   On the left side view of this print, there is a horizontal, straight-line segment that does not connect to other lines. In basic terms, explain why. (Multiple Choice)A: It represents a rounded edge and is there to help clarify the view, even though no sharp edge exists.B: It represents a straight edge that can't be seen in other views.C: It's a drafting mistake and should not be there.D: It represents a locating edge on the part and must be there to establish a primary plane for the inspection setup. This print does not show a cutting-plane line. Is this acceptable practice or an error? (Multiple Choice)A: AcceptableB: Error

I need these two parts answered (Multiple Choice). If you can not answer all two parts please leave it for another tutor to answer. Thank you.   What size paper was used for the original version of this print? (Multiple Choice)ABCD The two views near the bottom of the print are called detail views. Which one of theviews above (left side, front, or right side) shows the same geometry, but at the normal 1:1scale? (Multiple Choice)a. left sideb. frontc. right side The major diameter (100 mm) of this part is interrupted by a flat surface on top. Is an auxiliary view required to show the true size and shape of that flat surface? (Multiple Choice)a. Yesb. No

Full Answer PLEASE!.  Answer Q 3 and 4 PLease Don't copy from the internet. PLEASE WRITE YOUR OWN WORDS THANK YOU

This is the complete question and not a writing assignment. Make sure for this problem you list the following: a. Known: State briefly what is known about the problem. b. Schematic: Draw a schematic of the physical system or control volume. c. Assumptions: List all necessary assumptions used to complete the problem. d. Properties: Identify the source of property values not given to you in the problem. e. Find: State what must be found. f. Analysis: Start your analysis with any necessary equations. Develop your analysis as completely as possible before inserting values and performing the calculations. Draw a box around your answers and include units and follow an appropriate number of significant figures.

I need parts 3 and 4 answered pertaining to the print provided.  I asked this question previously on here and I received the wrong answers to the 2 parts Im asking about, so I am reposting the question again to have another tutor answer it.   Part 3: I need to tell what was ommited. Part 4: I need to tell what the triangle equals? Lower right or J1 zone has the answer.

I need these three parts answered, if you can not answer all three parts please leave it for another tutor, thank you.