The rigid bar ABC is supported by a pin at A and a steel rod at B. Determine the magnitude of the vertical displacement of point C if the stress in the steel rod is limited to 29.16 ksi, X = 2.87 ft, and Y = 4.08 ft. Neglect the weights of the members. Round off the final answer to four decimal places. ... L = 4 ft |A = 0.5 in.2 E = 29 ×10° psi B A

The rigid bar ABC is supported by a pin at A and a steel rod at B. Determine the magnitude of the vertical displacement of point C if the stress in the steel rod is limited to 29.16 ksi, X = 2.87 ft, and Y = 4.08 ft. Neglect the weights of the members. Round off the final answer to four decimal places. ... L = 4 ft |A = 0.5 in.2 E = 29 ×10° psi B A

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The rigid bars AB and CD are supported by pins at A and D. The vertical rods are made of aluminum and bronze. Determine the vertical displacement of the point where the force P = 10 kips is applied. Neglect the weights of the members. Aluminum L = 3 ft A = 0.75 in.2 E = 10 x 10° psi A te-2 ft-le–3 ft - Bronze L= 4 ft A = 0.25 in.2 E = 12 x 10° psi C +2 ft - 2 ft
The bell-crank mechanism is in equilibrium for an applied load of P = 15 kN. Assume that a = 270 mm, b = 205 mm, and 8 = 66°. The pin at B has a diameter of d = 16 mm, and the bell crank has a thickness of t = 6 mm. Calculate the average shear stress in the pin at B. (1) Answer: T= i Bell crank A a B Support bracket MPa B
,,
If the allowable bearing stress for the material under the supports at A and B is = 710 psi, determine the maximum load Pmax that can be applied to the beam. The bearing plates each have square cross sections of 5 in. by 5 in. The reactions at the supports are vertical. Assume w = 650 lb/ft, a = 10ft, and b = 5 ft. Answer: Pmax i a B b lb
The steel bars AC and BC, each of cross-sectional area 120 mm2, are joined at C with a Determine the displacement of point C caused by the 15-kN load. Use E = 200 GPa for steel.
If the allowable bearing stress for the material under the supports at A and B is Ob = 780 psi, determine the maximum load Pmax that can be applied to the beam. The bearing plates each have square cross sections of 5 in. by 5 in. The reactions at the supports are vertical. Assume w = 600 lb/ft, a = 12 ft, and b = 6 ft. Answer: Pmax= i W a B b lb P
1. We have a truss structure with a hinge on the left and a roller on the right. (Use method of moments ONLY for finding the members and use the numbered name only for each member) 30.00" a) Find the force acting on members 2, 3, 7, 9, 14, 15. (Indicate Compression or Tension) b) Determine the normal stress @ members 2, 3, 7, 9. (Use figure 2 for cross-sectional area) P/2 30.00" T IP 30.00" T Figure 1 30.00" P/2 30.00" P/2 10.00" 20.00" 2.00" 0.20" Figure 2 0.20" 2.00" 0.20"!
Determine the forces in members BC and CG. The forces are positive if in tension, negative if in compression. Α' 28 kips Answers: BC = i B 12' G CG = i 11' 12' C 12' D F 66° E kips kips
1. We have a truss structure with a hinge on the left and a roller on the right. (Use method of moments ONLY for finding the members and use the numbered name only for each member) 30.00" a) Find the force acting on members 2, 3, 7, 9, 14, 15. (Indicate Compression or Tension) b) Determine the normal stress @ members 2, 3, 7, 9. (Use figure 2 for cross-sectional area) P/2 30.00" D foo 30.00" Figure 1 30.00" (10 N -30.00" P/2 P/2 10.00" 20.00" 2.00" 0.20" Figure 2 0.20" 2.00" 0.20"
The bell-crank mechanism is in equilibrium for an applied load of P= 48 kN. Assume that a = 230 mm, b = 180 mm, and 8 = 65°. The pin at B has a diameter of d = 30 mm, and the bell crank has a thickness of t= 10 mm. Calculate the bearing stress in the bell crank at pin B. (1) P Answer: O= i Bell crank A a C MPa B Support bracket b B F₁
The cross-section of the two wooden members is a rectangle with a = 120 mm and b 60. They are joined by a simple glued joint as shown. Knowing that P = 9 kN, determine the normal and shear stresses at the joint when (a) a = 30°, (b) a = 45°.