Q1: Find the boundary layer thickness (8) equation, the shear stress (to) and thecoefficient of drag (C₁) if the velocity distribution in the laminar boundary layer over theface of a spillway was observed to be:(40%)25--0-0-0)= 2+Then calculate the boundary layer thickness and drag force if the air flows over a sharpedged flat plate 0.25m long and 0.5m wide at a velocity 1 m/s, take the air density 1.23kg/m³ and the kinematic viscosity is 1.46*10-5 m/s².

Answered: Image /qna-images/answer/494ce9a1-6012-4f90-bb65-ebd6a0fca946.jpg

Q1: Find the boundary layer thickness (8) equation, the shear stress (to) and the coefficient of drag (Cp) if the velocity distribution in the laminar boundary layer over the face of a spillway was observed to be: (40%) И = +3 Then calculate the boundary layer thickness and drag force if the air flows over a sharp edged flat plate 0.25m long and 0.5m wide at a velocity 1 m/s, take the air density 1.23 kg/m³ and the kinematic viscosity is 1.46*10-5 m/s².

Q1: Find the boundary layer thickness (8) equation, the shear stress (to) and the coefficient of drag (Cp) if the velocity distribution in the laminar boundary layer over the face of a spillway was observed to be: (40%) И = +3 Then calculate the boundary layer thickness and drag force if the air flows over a sharp edged flat plate 0.25m long and 0.5m wide at a velocity 1 m/s, take the air density 1.23 kg/m³ and the kinematic viscosity is 1.46*10-5 m/s².

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

7
Q.3 Air (density 1.2 kg/m3 and kinematic viscosity 15 centistokes) flows over a flat plate, at zero angle of incidence, at a velocity of 20 m/s. If Reynolds number at transition is taken as 2.5 × 105, maximum distance, from leading edge up to which the boundary layer remains laminar is
A ship is towing a sonar array that approximates a submergedcylinder 1 ft in diameter and 30 ft long with itsaxis normal to the direction of tow. If the tow speed is12 kn (1 kn = 1.69 ft/s), estimate the horsepower requiredto tow this cylinder. What will be the frequency of vorticesshed from the cylinder? Use Figs.
Q4) Define the boundary layer, then find the thickness of boundary layer, shear stress, drag force and coefficiet of drag in terms of Re for the velocity profile of laminar boundary layer u/U=4(y/8)-6(y/8)5. Calcate the boundary layer thickness and drag force if the air flows over a sharp edged flat plate 1m long and 0.5m wide at a velocity 0.9m/s, the air density 1.23 kg/m³ and the kinematic viscosity is 1.46*10-5 m/s².
Some engineers want a good estimate of drag and boundary-layerthickness at the trailing edge of a miniature wing. The chord and span ofthe wing are 6 mm and 30 mm, respectively and a typical flight speed is5 m/s in air (kinematic viscosity = 15 × 10−6 m2/s; density = 1.2kg/m3). An engineer may decide to make a superseding model withchord and span of 150 mm and 750 mm, respectively. Measurements onthe model in a water channel flowing at 0.5 m/s (kinematic viscosity = 1× 10−6 m2/s, density = 1000 kg/m3) give a drag of 0.19 N and aboundary-layer thickness of 3 mm. Estimate the corresponding values forthe prototype
% change in laminar boundary layer thickness in the end of the plate
B) for the velocity profiles given below, state whether the boundary layer has separated or on the verge of separation or will remain attached ( i) u/U=2(y/8) -(y/8)² ii) u/U=-2(y/8) +0.5(y/8)³ iii) u/U-1.5(y/8) +0.5(y/8)³ Q3: Find the displacement, momentum thickness and energy thickness for the velocity distribution in the boundary layer: F u/U=0.5(y/8) + 1.5(y/8)³ Q4: A) Find the velocity distribution and expression of the maximum velocity and shear stress for a flow between two stationary plates. C B) A laminar flow of oil between two horizontal fixed parallel plates with a maximum velocity 2 m/s and 100mm apart. Canulate the pressure gradient and shear stress. Take µ-2.4525 s/m².
I need the answer as soon as possible