PROBLEM: A rectangular beam has a clear span of 8.0 m and carries a working live load of 14.0 kN/m and dead load of 11.58 kN/m, fe' = 27.6 MPa, fy = 414 MPa. The beam has a width of 350 mm and an effective depth of 500 mm. It is reinforced with 6 – 28 mm diameter bars. Total depth = 550 mm, diameter of stirrups is 10 mm. REQUIRED: a) Determine the spacing at critical section using detailed and simplified equation.

PROBLEM: A rectangular beam has a clear span of 8.0 m and carries a working live load of 14.0 kN/m and dead load of 11.58 kN/m, fe' = 27.6 MPa, fy = 414 MPa. The beam has a width of 350 mm and an effective depth of 500 mm. It is reinforced with 6 – 28 mm diameter bars. Total depth = 550 mm, diameter of stirrups is 10 mm. REQUIRED: a) Determine the spacing at critical section using detailed and simplified equation.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A rectangular beam section has d = 600 mm, dsc = 35 mm. When the neutral axis is at its limiting depth, Asc = 250 mm2 and Ast = 2500 mm2. What is the compressive force due to the steel? Select one: 125 kN 50 kN C. 100 kN d. 200 GPa e. 500 MPa a. b.
calculate for the force at member FH calculate for the force at member GH calculate for the force at member GI
Determine the spacing between stirrups at maximum shear force for the simply supported beam that has a span of (7 m). The beam is carrying a uniformly distributed dead load (including its self-weight) of (30 kN/m) and a uniformly distributed live load of 31 kN/m. Use concrete of (Fe'= 25 MPa) and steel with a yield strength (Fy = 300 MPa). PL = 31kN/m PD = 30kN/m (include Self Weight) 7m -300mm- As 500mm
A lightweight reinforced concrete beam is 400 mm and 630 mm deep.The beam is simplysupported over a span of 7.7 m and carries a uniform dead load of 12 kN/m excluding its ownweight and a uniform live load of 12 kN/m. The beam is reinforced for tension only with six-28mm diameter bars with an effective depth to tension bars of 570 mm. fc’=20.7 Mpa, fy=344.8Mpa. Modulus of Elasticity of Concrete, Ec = 21,750 Mpa and Es = 200 GPa a. Calculate the maximum instantaneous deflection due to service loads. b. Calculate the deflection for the same loads after five years assuming that 50% of thelive load is sustained.
Solve b
Reinforced And Prestressed Concrete PROBLEM: A reinforced rectangular beam with width b and effective depth d has 4 -16 mm bars placed on 1 layer at the tension side. The beam has a stirrup with a diameter of 10 mm. Use fc=28 Mpa and fy=420 MPa b= 275 mm d= 440 mm L= 3.85 m Wd = 19.25 kN/m WL = 24.75 kN/m Calculate the nominal moment capacity of the beam Calculate that strain of the tension bars. Calculate the strength reduction factor of the beam
complete solu pls asap ty
(a). A beam 6 m long is fixed at both ends. It carries DL = 14 Kn/m and LL = 20 kN/m. If EG = 28 MPa, fy = 420 MPa, and wt of conc = 23.5 kN/m?, design a singly reinforced rectangular beam using NSCP 2015. Use 20mm diameter bars. (b). Determine the required spacing of 10mm diameter stirrups at the critical section.
Solve a