Player 001 decided to create a 2-kg hanging figurine display as shown. The display is held in equilibrium by a hinge at F and a lightweight cable attached at point C. He placed figurines with varying sizes such that their weights approximate a triangular distributed load on side AB as shown. 3.00 N/m A .800 m F 1.200 m 0.600 m 5. Which of the following approximates the magnitude of the tension force?

Player 001 decided to create a 2-kg hanging figurine display as shown. The display is held in equilibrium by a hinge at F and a lightweight cable attached at point C. He placed figurines with varying sizes such that their weights approximate a triangular distributed load on side AB as shown. 3.00 N/m A .800 m F 1.200 m 0.600 m 5. Which of the following approximates the magnitude of the tension force?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A beam is subjected to equal bending moments of M, = 3800 N-m. The cross-sectional dimensions are b = 200 mm, c = 30 mm, d = 75 mm, and t = 8 mm. Determine: (a) the centroid location (measured with respect to the bottom of the cross-section), the moment of inertia about the z axis, and the controlling section modulus about the z axis. (b) the bending stress at point H. Tensile stress is positive, while compressive stress is negative. (c) the bending stress at point K. Tensile stress is positive, while compressive stress is negative. (d) the maximum bending stress produced in the cross section. Tensile stress is positive, while compressive stress is negative. M. y M2 H d ((ур) K b
Solve using Mohr circle method
Design the beam using the Working stress diagram to resist the loads. Take fc = 10 MPa, fs = 120 MPa, n = 12, bar diameter = 20 mm. Take b = d/2.
The normal tension for a chain having x-sectional area =0.03 cm², weight=480gm, E=2x10° kg/cm?. Standard pull=8 kg, is.
A beam is subjected to equal bending moments of M, = 4300 N-m. The cross-sectional dimensions are b = 140 mm, c = 35 mm, d = 68 mm, and t = 5 mm. Determine: (a) the centroid location (measured with respect to the bottom of the cross-section), the moment of inertia about the z axis, and the controlling section modulus about the z axis. (b) the bending stress at point H. Tensile stress is positive, while compressive stress is negative. (c) the bending stress at point K. Tensile stress is positive, while compressive stress is negative. (d) the maximum bending stress produced in the cross section. Tensile stress is positive, while compressive stress is negative. M2 H d (tур) K Answer: (a) y= i mm Iz = i mm4 S= i mm3 (b) ƠH MPa (c) OK = i MPa (d) Omax i MPa
Determine the force in each member of the loaded truss. The forces are positive if in tension, negative if in compression. Assume F = 2240 N, a = 3.3 m, b = 6.6 m, 0 = 47° Answers: AB= AC = B AD = Ꮎ Jak a Ө b Ꮎ N Z Z N N D F
The beam shown here is made of wood with an allowable shear stress of τall = 1100 psi. If PB = 5 kips, determine the maximum allowable force PC that can be applied on the structure before the beam fails in shear.[LAB= 2 ft, LBC= 2 ft, LCD= 1.5 ft, b = 1.25 in., h = 7 in.] Determine the maximum value of the first moment of area (Q) for the beam. (in^3) Determine the maximum allowable force at C (PC) that can be applied on the structure before it fails in shear. (kips)
For the frame below, find the internal forces in element BD. The applied loads are each L = 500 pounds. L L 10" 15" 30° 30 10" D A E 20" B.
Provide solution and mention all steps
Determine the forces in members BC and CG. The forces are positive if in tension, negative if in compression. A 30 kips Answers: BC= CG= 10' i i B 10' C 10' D 12' 比 69° G SE E kips kips