Gaseous nitrogen actuates a Carnot power cycle in which the respectivevolumes at the four corners of the cycle, starting at the beginning of theisothermal expansion, are V1= 10.10 L, V2= 14.53 L, V3= 226.54 L, and V4= 157.73 L.The cycle receives 21.1 kJ of heat. Determine the work, and the mean effectivepressure.65 kPa3600 J64.91 Pa14.05 kJ64.91 kPa14.05 J65 Pa3600 kJOther:O O

Answered: Image /qna-images/answer/5fc4511f-e1c4-4da8-ac77-cf12b5165fbf.jpg

Gaseous nitrogen actuates a Carnot power cycle in which the respective volumes at the four corners of the cycle, starting at the beginning of the isothermal expansion, are V1= 10.10 L, Vv2= 14.53 L, V3= 226.54 L, and V4= 157.73 L. The cycle receives 21.1 kJ of heat. Determine the work, and the mean effective pressure. 65 kPa 3600 J 64.91 Pa 14.05 kJ 64.91 kPa 14.05 J 65 Pa 3600 kJ Other: O O O O O0

Gaseous nitrogen actuates a Carnot power cycle in which the respective volumes at the four corners of the cycle, starting at the beginning of the isothermal expansion, are V1= 10.10 L, Vv2= 14.53 L, V3= 226.54 L, and V4= 157.73 L. The cycle receives 21.1 kJ of heat. Determine the work, and the mean effective pressure. 65 kPa 3600 J 64.91 Pa 14.05 kJ 64.91 kPa 14.05 J 65 Pa 3600 kJ Other: O O O O O0

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A cycle operates on air occurs as follows: an isentropic compression 1-2, a constant -pressure expansion 2-3, an isentropic expansion 3-4, and finally a constant volume cooling 4-1. The ratio of compression during isentropic compression is 14, ratio of expansion during constant-pressure expansion is 2, P1 = 47 kPa, T1 = 32oC, V1 = 0.2 m3. Find the heat added.
. If the heat added in the Carnot engine is equal to 40kW and that the heat rejected amounts to 15.40kW. determine the higher temperature limit of the cycle if the lower temperature limit of the cycle is 30C.a. 514.2526C b. 514.2527C c. 514.2528C d. 514.2529C
Consider an Otto cycle where air, having constant specific heats, is the working fluid. Show that the thermal efficiency can be expressed as: 1 n 1 rk-1 where r is the compression ratio and k = Cp/C₂. This equation suggests that thermal efficiency goes to 1 as the compression ratio becomes large. What is the practical limitation to increasing r as a means of increasingn?
A power cycle operates between two thermal reservoirs at 300 K and 800 K. The working fluid of the cycle is air, which can be considered to be an ideal gas. Specific heats are not assumed to be constant. An inventor claims that for a heat input of 250 kJ, the net work from the cycle is 80 kJ. The work generating component in the cycle is a reversible, steady state turbine. The inlet pressure and temperature are 1000 kPa and 600 K and the exit temperature is 550 K. The turbine receives 150 kJ/kg of heat from the high temperature reservoir and loses 10 kJ/kg of heat to the ambient at 298 K. (a) Prove whether or not the overall cycle is possible using second law arguments. (b) determine the work done by the turbine [kJ/kg]
In a steady-state operating power plant, saturated liquid H2O at 122 deg C is fed to a boiler at 3.756 m/s through a pipe (0.03 m diameter). It leaves the boiler at 9 bar and 88.7 m/s. Then, it enters the turbine through a constant 0.13 m diameter pipe. The exit pipe of the turbine is 0.3 m in diameter and T = 310ºC while P = 1.37 bar. If 2.5 kg/s water is fed and there is change in KE, prove that the fluid enters the turbine at 637.06 deg C.
The compression ratio of an Otto cycle as shown in the figure below is VA/VB = 9.00. At the beginning A of the compression process, 505 cm3 of gas is at 115 kPa and 20.0°C. At the beginning of the adiabatic expansion, the temperature is TC = 725°C. Model the working fluid as an ideal gas with ? = 1.40.
A Carnot Power Cycle Operates on 2 lb of air between the limits of 70°F and 500°F . The pressure at the beginning of the isothermal expansion is 400 psia and at the end of isothermal expansion is 185 psig. Determine a.the volume at the end of the isothermal compression b.Change in entropy during the isothermal process c.heat added
3. In a gas turbine plant air is compressed from 1.01 bar and 15 °C through a pressure ratio of 5. It is then heated in a combustion chamber at constant pressure to a temperature of 700 °C and expanded to atmospheric pressure in a turbine. The isentropic efficiencies of compression and expansion are respectively 0.8 and 0.85. Calculate (a) the cycle efficiency and (b) the work ratio. Assume that the properties of air do not change with temperature and may be taken as Cp = 1.005 kJ/kg K and y = 1.4.
A turbo-generator has a combined steam rate of 5.35 kg/kW-hr at its rated output of 20 MW. The steam is supplied at 17 bar, 300oC and exhaust at 0.1 bar. Calculate (a) the combined heat rate, (b) the combined thermal efficiency, (c) the engine efficiency, and (d) the combined work.used the readings in steam table at KJ/kg, and draw the T-S diagram
A regenerative steam cycle renders A. increased work output per unit mass of steam В. decreased work output per unit mass of steam C. increased thermal efficiency decreased work output per unit mass of steam as D. well as increased thermal efficiency
Determine the efficiency of a constant volume cycle withlexpansion ratio equal to 7.8. **Express final answer in TWO DECIMAL PLACES Do not round off in between solution. Type only the "numerical value". No need to include the unit and percent sign. Answer:
kgK 4. An ideal Otto cycle has a compression ratio of 9. Using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 60 kW of power, k=1.4.