Determine the tilt of the instrument from the following set of measurements of a two peg test over points P and R which are 50 m apart Rod reading on pointLevel set up atRMiddle of P and R1.8301.64550 m from P (100m from R)1.1200.94250 m from R (100m from P)2.3102.116

If instrument at the middle P & R;

Answered: Determine the tilt of the instrument…

Determine the tilt of the instrument from the following set of measurements of a two peg test over points P and R which are 50 m apart

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

4. What is the total correction per tape length due to temperature, pull and sag in meters? Round off your answers to 4 decimal places and include the negative sign if it is negative
Solve for the Slopes at point B
A Civil Engineer used a 50m tape in measuring an inclined distance. The measured length on the slope was recorded to be 459.20 m long. The difference in elevation between the initial point and the end point was found to be 1.25 m. The 50 m tape is of standard length at a temperature of 10°C and a pull of 50 N. During measurement the temperature reading was 8°C and the tape was supported at both ends with an applied pull of 70 N. The cross-sectional area of the tape is 6 mm2 and the modulus of elasticity is 200 GPa. The tape has a mass of 0.075 kg/m. Coefficient of thermal expansion is 0.0000116 /°C.Determine the magnitude of the correction per tape length in meters due to temperature. Round off your answers to 4 decimal places. Determine the magnitude of the correction per tape length in meters due to pull. Round off your answers to 4 decimal places. Determine the magnitude of the correction per tape length in meters due to sag. Round off your answers to 4 decimal places. What is the…
Summative Assessment - Geometric Method Determine the Deflection at D. Use the Any Geometric Method (once for DIM, once for AMM, once for CBM) E= 200 GPa, lan = 250x10* mm" leco = 200x10* mm". Distances are in meters. Show complete Solutions 8 kN 6 kN 15 kN/m K Tachnalagy Dutn by fanantien Input your answer in two decimal places. Units in millimeters. No need to write down the units. Just input the numerical value with the sign. Example: if your final answer is 2.11mm upwards, just key-in 2.11 then if your final answer is 2.11mm downwards, key-in -2.11
A Civil Engineer used a 40m tape in measuring an inclined distance. The measured length on the slope was recorded to be 459.20 m long. The difference in elevation between the initial point and the end point was found to be 1.25 m. The 40 m tape is of standard length at a temperature of 10°C and a pull of 50 N. During measurement the temperature reading was 9°C and the tape was supported at both ends with an applied pull of 45 N. The cross-sectional area of the tape is 6 mm2 and the modulus of elasticity is 200 GPa. The tape has a mass of 0.075 kg/m. Coefficient of thermal expansion is 0.0000116 /°C. 1. Determine the magnitude of the correction per tape length in meters due to temperature. Round off your answers to 4 decimal places. 2. Determine the magnitude of the correction per tape length in meters due to pull. Round off your answers to 4 decimal places. 3. Determine the magnitude of the correction per tape length in meters due to sag. Round off your answers to 4 decimal places. 4.…
A tacheometer was placed at point P to estimate the horizontal distances PQ and PR. The corresponding stadia intercepts with the telescope kept horizontal, are 0.320 m and 0.210 m, respectively. The ZQPR is measured to be 61° 30' 30". If the stadia multiplication constant = 100 and the %3D stadia addition constant = 0.10 m. The horizontal distance (in m) between the points Q and R is [2 Marks] P R.
Please help me I need it ASAP
I need the answer as soon as possible
Using double integration method: a)determine the value of the slope at 4m from the left end of the beam b) determine the value of the deflection at 6m from the left end of the beam C) determine the value of constant, C2 and C1 for segment AB D)determine the value of the deflection at 8m from the left end of the beam
2. A transit with a stadia interval factor solve in # 1 was set at C on the line between points A and B, and the following stadia readings were observed. Position of Rod Vertical Angle Hair Readings Upper Middle Lower Rod at A +15° 35' 1.330 1.175 1.020 Rod at B -8° 08' 1.972 1.854 1.736 If the stadia constant is 0.831m, determine the following: a.) Length of line AB. b.) Difference in elevation between points A & B. c.) Find the horizontal distance from the transit to the rod held at B. Rod held at A 5-8²33 Horizon line of sight Transit C=0.38m Red held at B- 4₂-8.00 %2 ¹2 VD₂ AR₂
Do the measurement using Micrometer Caliper agree with that of the Vernier Caliper from different objects? Explain the similarities and differences.
I WILL RATE! What is the Deflection at 2.5 m to the right of B in mm? Indicate the negative sign if the answer is negative. Use Any GEOMETRIC METHOD!