An open cylindrical vessel, 3m high and 1.50m in diameter is filled with water to a depth of 2.50m. In its side is a 50mm circular orifice, C = 0.60 placed 300mm above the bottom of the vessel. The vessel is rotated about its own axis at 60rpm and the water allowed to escape through the orifice for a period of 3minutes. Determine the volume of water allowed to escape through the orifice in "cu. m"

An open cylindrical vessel, 3m high and 1.50m in diameter is filled with water to a depth of 2.50m. In its side is a 50mm circular orifice, C = 0.60 placed 300mm above the bottom of the vessel. The vessel is rotated about its own axis at 60rpm and the water allowed to escape through the orifice for a period of 3minutes. Determine the volume of water allowed to escape through the orifice in "cu. m"

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Water flows through a pipe AB with_m diameter and_ m/s then passes through pipe BC with AB (in cubic meter/second), the velocity (in meter/ second) in BC and CD and the diameter (in meter) of CE if CD is __ m in diameter and carries 1/3 of the flow in AB. diameter. The flow in branch CE is _ m/s. Find the volume rate in 08 m D. A 1.2 m 1.5 m VAp= 3 m/sec E VCE 2.5 m/sec
Water flows upwards through a venturi section. The venturi section varies indiameter from 15cm at the top and bottom to 5cm at the narrowest point. A differential pressuretransducer measured a pressure difference of 43kPa. Assuming steady flow, determine the velocity ofthe flow through the narrowest region and the discharge through the meter. Assume that water has adensity of 1g/cm 3 .b) The discharge through the venturi section
Water flows from a tank thru a 200mm and 125mm diameter circular orifice with a total drop in water surface of 12m. The coefficient discharge for each orifice is C = 0.65. Considering the flow uniform and neglecting velocity of approach, determine the height hi and h2 and the maximum discharge. H2 nes) 立
4) If water flows at 100 kg/s through the double wye at B, at 70 kg/s through C, and at 90 kg/s through D, determine the average velocity of flow through the pipe at A. (Answer: V₁ = 3.68 m/s) 300 mm 200 mm 100 mm 200 mm
Water flows through a pipe AB withm diameter andm/s then passes through pipe BC with diameter. The flow in branch CE is AB (in cubic meter/second), the velocity (in meter/ second) in BC and CD and the diameter (in meter) of CE if CD is m/s. Find the volume rate in m in diameter and carries 1/3 of the flow in AB. 0.8 m B. 1.2 m 1.5 m VAB- 3 m/sec Q2 E VoE 2.5 m/sec
Determine (a) the discharge in the tube immediately after it is opened. Determine (b) the time for the water surface in each tank to be at the same level. Determine (c) the time for the difference in the water surface to be 4 meters.....
Q4: A tank of water empties by gravity through a horizontal pipe into another tank in figure (1) .There is a sudden enlargement in the pipe as shown.At a certain time the difference in levels is 3m.Each pipe is 5m long and has a friction coefficient Cf-0.007 The inlet loss constant is K=0.5 and bore diameter in point A 20mm ,and bore diameter in point B 60mm.Calculate this point. the volume flow rate at Calculate the volume flow rate at this point. (1) 20 mm bore diameter 3 m 60 mm bore diameter (2)
An open tank with piezometers attached on the side contains two different liquids.Determine the elevation of the liquid in piezometer Achoices are:A. 2.2mB. 2mC. 2.4mD. 2.1m Find the pressure at the bottom of the tankchoices are: A. 18.59 Kpa B. 18.85 kPa C. 19.85 kPa D. 18.95 kPa Find the elevation of the liquid in piezometer Bchoices are: A. 0.918m B. 0.819m C. 0.189m D. 0.889m
Q1(b) Water flows through a pipe with a diameter of 2 m. Stagnation and static pressures measured by pitot tube are 0.3 m and 0.25 m of water, respectively. Calculate the velocity of flow
An orifice having an area of 0.0003 m2 is located on the vertical side of a tank. The tank has a constant cross-sectional area of 0.40 m2. It takes 312 seconds to lower the head from 1.20 m to 0.60 m. Determine the following:a. Coefficient of dischargeb. The time to lower the head from 1.20 m to 0.80 m when C = 0.60.c. The head after 240 seconds from an initial head of 1.20 m when C = 0.60
A 50 mm diameter siphon discharges water from a reservoir (Point 1 elev = 20m) into open air (Point 3 elev. 10m). The head loss from the reservoir (point 1) to the summit (point 2 elev = 28m) is 3 times the velocity head in the siphon and head loss from the summit to the discharge end is 4 times the velocity head in the siphon. Determine the velocity in the siphon in m/s? 3 The correct answer has a margin of 0.05 from the exact answer. TOCUL T OWCT. 7:13 PM 27°C Rain showers 入口の ENG 04/10/2021