A transit line is established and the surveyor wants to determine the area bounded by the river. The field observations are as follows: Offset Distance Station Remarks (m) 12.22 10 + 040 Start of Work 10 + 060 11.32 10 + 080 8.82 10 + 100 6.62 BM#250 10 +120 16.38 10 + 140 10.35 End of Work a) Find the area (in sq. m) bounded by the river and along the station of work using trapezoidal rule? b) The area (in sq. m) bounded by the river and along the station of work using Simpson's One-Third rule? c) Find the difference of areas (in sq. m) between the two methods?

A transit line is established and the surveyor wants to determine the area bounded by the river. The field observations are as follows: Offset Distance Station Remarks (m) 12.22 10 + 040 Start of Work 10 + 060 11.32 10 + 080 8.82 10 + 100 6.62 BM#250 10 +120 16.38 10 + 140 10.35 End of Work a) Find the area (in sq. m) bounded by the river and along the station of work using trapezoidal rule? b) The area (in sq. m) bounded by the river and along the station of work using Simpson's One-Third rule? c) Find the difference of areas (in sq. m) between the two methods?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Arrange the following description in the form of profile level notes complete to elevation. A level is set up and a reading of 2.995m is taken on a bench mark the elevation of which is 12.135m. At the beginning of the line to be profiled, the rod reading is 2.625m, 30m from the beginning, it is 1.617m, at 60m, it is 0.702m, at 66m and 81m, the rod readings are 1.281m and 0.762m, respectively. On a rock that is not on line, the rod reading is 0.555m. The level is then removed ahead, set up and a rod reading of 1.952m is observed, the rod still being held on the rock. The readings along the profile are then resumed: 90m from the beginning of the line, the rod reading is 1.159m, 120m from the beginning of the line rod reading is 1.434m, and finally 150m from the beginning of the line the rod reading is 2.196m.A. Compute the elevation at the point 60m, from the beginning of the line.B. Compute the elevation of the turning point.C. Compute the difference in elevation at a point 150m and 81m…
None
show 1st angle projection
Draw the figures based on the relative coordinates given
Discuss MINIMUM COVER REQUIREMENTS AND STANDARD DIMENSIONS
Define Passive Condition
Solve by slope deflection only
Determine coordinates of centroid of the following shaded area. y| 18 cm 12cm 16em y - ¥ 40 mm, 75 mm
Determine the centroid of the lines that form the boundary of the shaded area shown. Determine: a. Total area b. x̅ c. ȳ
What defines ground water table position?
1. Arrange the following description in the form of profile level notes complete to elevation. A level is set up and a reading of 2.995m is taken on a bench mark the elevation of which is 12.135m. At the beginning of the line to be profiled, the rod reading is 2.625m, 30m from the beginning, it is 1.617m, at 60m, it is 0.702m, at 66m and 81m, the rod readings are 1.281m and 0.762m, respectively. On a rock that is not on line, the rod reading is 0.555m. The level is then removed ahead, set up and a rod reading of 1.952m is observed, the rod still being held on the rock. The readings along the profile are then resumed: 90m from the beginning of the line, the rod reading is 1.159m, 120m from the beginning of the line rod reading is 1.434m, and finally 150m from the beginning of the line the rod reading is 2.196m. A. Compute the elevation at the point 60m, from the beginning of the line. B. Compute the elevation of the turning point. C. Compute the difference in elevation at a point 150m…
Compute the setting out coordinates. Angle A is 20 degree 3 minute 16 second