A model of a large pollution-sampling balloon prototype is to be tested in a water tunnel (waterdensity: 1000 kg/m³, water viscosity: 1x10³ N.s/m²). The 1:20 scale model is built for testing.The large balloon will experience a maximum wind speed of 5 m/s (air density: 1.24 kg/m³, airviscosity: 1.8x10 N.s/m2), if the model experiences 2 kN drag force, find the following:a) Water speed required to model the prototypeb) The corresponding drag force on the prototype(Pwater = 1000 kg/m', µviscosity = 1x10-3 N.s/m2, pair = 1.24 kg/m³ , µair=1.8x10$ N.s/m²)

Answered: Image /qna-images/answer/5657e2cd-fbb9-4f99-afbb-9173cbc7f8ea.jpg

A model of a large pollution-sampling balloon prototype is to be tested in a water tunnel (water density: 1000 kg/m³, water viscosity: 1x10³ N.s/m²). The 1:20 scale model is built for testing. The large balloon will experience a maximum wind speed of 5 m/s (air density: 1.24 kg/m², air viscosity: 1.8x10$ N.s/m2), if the model experiences 2 kN drag force, find the following: a) Water speed required to model the prototype b) The corresponding drag force on the prototype (Pwater = 1000 kg/m³, µViscosity = 1x103 N.s/m2, pair = 1.24 kg/m³ , µair= 1.8x10S N.s/m²) %3D

A model of a large pollution-sampling balloon prototype is to be tested in a water tunnel (water density: 1000 kg/m³, water viscosity: 1x10³ N.s/m²). The 1:20 scale model is built for testing. The large balloon will experience a maximum wind speed of 5 m/s (air density: 1.24 kg/m², air viscosity: 1.8x10$ N.s/m2), if the model experiences 2 kN drag force, find the following: a) Water speed required to model the prototype b) The corresponding drag force on the prototype (Pwater = 1000 kg/m³, µViscosity = 1x103 N.s/m2, pair = 1.24 kg/m³ , µair= 1.8x10S N.s/m²) %3D

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

EXAMPLE 3: (EX. 10.2 HEAD LOSS FOR LAMINAR FLOW) Oil (S = 0.85) with a kinematic viscosity of 6 X 10-4 m²/s flows in a 15 cm pipe at a rate of 0.020 m³/s. What is the head loss per 100 m length of pipe? (then resolve the problem but with fluid of water instead of oil)
answer should be on the choices
Calculate the pressure drop for the cyclone of Problem 4,2, assuming K =14,
A ground level contamination source emits 0.45 g/s of a toxic gas into a 2.5 m/s wind. Assuming no initial rise of the gas at the point of release, what is the maximum ground-level concentration (in µg/m3) 500 m downwind from the source if the plume's standard deviations are oy = 76 m and oz = 38 m?
Q.1 Uniform Flow What is the specific energy (m-kg/kg) for 1 m depth of flow having velocity of 3 m/s?
What would be the return period of a design storm to be used for the design of a hydraulic structure? Let there be a probability of 25% that the storm will occur in the next 25 years.
Q1: Determine the required fire flow for a three storeys wood frame building covering 700 m2 which connects with a five storeys building of fire resistive construction covering 900 m2. A Q2: Determine the terminal settling velocity in water at 20 °C of spherical particle of 0.0045 cm in diameter and a specific gravity of 2.65 (viscosity at 20 °C is 1.009 *10-2 Poise). What is the rising velocity of this particle if its specific gravity is 0.8.
B) Water at 20 degrees Celsius flows at a rate of 0.05 m3/s in a D=20cm asphalted cast-iron pipe. What is the head loss per kilometer of the pipe? Use Hazen-Williams formula.
A tank in a shape of an inverted cone having a radius of 1 m and a height of 3 m is filled with water. The vertex contains an 100mm diameter orifice whose average discharge coefficient of 0.63. Compute the time needed to empty the tank.
b) Looking into the future with mean temperature levels exceeding 2.50C above pre-industrial levels it is considered that the maximum size of the water drain pipe would increase by 4m3/second every decade . Provide a table of expected maximum drain loads over a period from 2030 to 2130 and plot this on a graph. You are advised to plot the maximum expected rainfall against pipe diameter.
Water flows at the rate of 12 m³/s in a 6 m wide rectangular channel. A hydraulic jump is formed in the channel at a point where the upstream depth is 30 cm (just before the jump). considering acceleration due to gravity as 9.81 m/s² and density of water as 1000 kg/m³, the energy loss in the jump is elisw moting dlu201
Assume that the ESP of Problem 5.1 is built with an actual collection area of 5400 m2, Now suppose that the actual drift velocity turns out to be 5,0 cm/s and the actual gas flow turns out to he 5500 m3/mtn, Calculate the actual efficiency, 5.1 A 98% efficient ESP is to treat a gas stream flowing at 5000 m3/ min. If the effective drift velocity is 6.0 cmf% calculate (a) the plate area {required and actual) in m2, and (b) the number of plates if each plate is 6 m hy 10 m, and there are 3 mechanical fields.