A mass of 5 kg of saturated liquid-vapor mixture of water is contained in a piston- cylinder device at 100 kPa. Initially, 2 kg of the water is in the liquid phase and the rest is in the vapor phase. Heat is now transferred to the water, and the piston, which is resting on a set of stops, starts moving when the pressure inside reaches 200 kPa. Heat transfer continues until the total volume increases by 30 perce-t Determine a) the initial and final temperatures, b) the mass of liquid water when the piston first starts moving, and c) the work done during this process.

A mass of 5 kg of saturated liquid-vapor mixture of water is contained in a piston- cylinder device at 100 kPa. Initially, 2 kg of the water is in the liquid phase and the rest is in the vapor phase. Heat is now transferred to the water, and the piston, which is resting on a set of stops, starts moving when the pressure inside reaches 200 kPa. Heat transfer continues until the total volume increases by 30 perce-t Determine a) the initial and final temperatures, b) the mass of liquid water when the piston first starts moving, and c) the work done during this process.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A piston-cylinder device contains 2.25 kg of liquid water at 20oC and 300 kPa, at this state, a linear spring is touching the piston but exerts no force on it. Heat is now slowly transferred to the cylinder, causing the pressure and the volume to rise to 2.25 MPa and 0.1125 m3, respectively. 1) What is the final temperature (oC)? 2) What is the work on the process (kJ)?
all parts plzzz(hand written asap)
Piston Water A piston cylinder system initially contains 2.4 kg of water at 0.35 MPa ad 25% quality. Water is heated at the constant pressure until the piston hits the stops. At this instance, the total volume in piston cylinder system is 1.08 m. Heat addition is continued until water is saturated vapor. Calculate the heat transfer during this process, in kJ.
Ammonia in a piston-cylinder assembly undergoes two processes in series. Initially, the ammonia is saturated vapour at P₁=1000 kPa. Process 1-2 involves cooling until the piston meets the stops where the position is locked in place at which time quality is x2=75%. The second process from state 2 to state 3, involves heating (at constant volume) until x3=100%. If the mass is 0.45 kg determine: The work for process 2-3 (in kJ). The heat transfer for process 2-3 (in kJ). Sketch the processes on a p-v diagram, what does the area under the curve represent?
5 lbm of air expands inside a piston cylinder configuration at a constant pressure of 24 psia.During the expansion process the temperature increases by 100F°. How much work was doneby the gas, in BTU. If the initial temperature is 76°F, what is the final volume after expansion, inft3
Please answer this with full solution. Thank you
Please help me with this question thanks sir appreciate
With a volume of 200 L and a cylinder pressure of 100 kPa with the piston on the stopper a piston-cylinder assembly contains water with a degree of dryness of 50%. A pressure of 200 kPa is needed to move the piston up. Volume 400 The cylinder continues to be heated until it reaches According to this; a) This process takes into account the saturation line in the T-v and P-v diagram. show. b) Calculate the temperature in the final state. c) Find the work done. d) Find the amount of heat transfer.
A 2.8 m^3 rigid tank is filled with saturated liquid vapor mixture of water at 300C. If 2% of its volume is liquid and the rest is vapor, the total mass in the tank in kg is?
3) A tank, well insulated, has two parts divided by partition. The first part incuded 3,5 kg of water at 800 kPa while the other part is evacuated. This partition is removed and the water expands to fill the entire tank. If the final pressure and temperature are 100 kPa and 200°C, respectively, please determine a- The volume of the tank b- Temperature of the water for first part
An ideal gas initially occupying 0.020 m3 at 1.0 MPa is quasistatically expanded inside a piston-cylinder device at a constant pressure until its volume doubles. Next the expansion is continued at constant volume till the pressure reaches half of the initial pressure. Finally it is brought back to the initial state in a polytropic process with exponent n=1.6 a) Draw the processes on a P-v diagram and calculate the total work. b) Calculate the total heat transfered, what is the difference between the initial and final temperature?
B. 5 kilograms of saturated liquid water is maintained at a constant pressure of 800 kPa while heat is added until the temperature reaches 700°C. Determine the work done by the water.