A 4m cantilever beam 265 mm x 429 mm carries a uniformly distributed dead load (including self-weight) of 14 KN/m along the length and a concentrated live load of 37 KN at the free end. The beam is pre-tensioned with 12mm dia. strands causing a final prestress force of 468 KN. Determine the resulting stress at the top fiber at the fixed end of the center of gravity of the strands is at 115 mm above the NA of the beam, in MPa. Use WSD Method.

A 4m cantilever beam 265 mm x 429 mm carries a uniformly distributed dead load (including self-weight) of 14 KN/m along the length and a concentrated live load of 37 KN at the free end. The beam is pre-tensioned with 12mm dia. strands causing a final prestress force of 468 KN. Determine the resulting stress at the top fiber at the fixed end of the center of gravity of the strands is at 115 mm above the NA of the beam, in MPa. Use WSD Method.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine the maximum flexural stress in the beam loaded as shown below
Determine the principal stress in the beam at point A. 60 kN 50 mm 150 KN 150 mm mm -05m- -025m
solve please ..
Оиestion 3 Fig. 3a Part a: For the section shown, determine the: Maximum elastic Moment M 10 Fully plastic moment Mp NA Shape factor 2 If loaded about the horizontal axis o, = 250MN / m²; E = 200GN /m² 40 Part b: Determine the bending moment necessary to cause yielding to a depth of 10mm from the top and bottom surfaces. Fig. 3b If after applying this load it is subsequently removed. What will be the residual stresses NA which will result at A andB when the load is removed? Yielded region 40 09 09
Link AC has a uniform rectangular cross section 1/8 in. thick and1 in. wide. Determine the normal stress in the central portion of the link.
B1
B1
NEED ASAP :(