A 3.3-liter, V6 SI engine with a compression ratio of 10.9:1 operates on an Otto cycle at 2600 RPM using stoichiometric gasoline. Crevice volume, which equals 2.5% of the clearance volume, has pressure equal to the pressure in the combustion chamber but remains at the cylinder wall temperature of 190°C. Conditions at the start of compres- sion are 65°C and 98 kPa. Assume complete combustion. Calculate: (a) Percent of gas mixture mass which is in the crevice volume at the start of combustion. (b) Percent of gas mixture mass which is in the crevice volume at the end of combustion.

A 3.3-liter, V6 SI engine with a compression ratio of 10.9:1 operates on an Otto cycle at 2600 RPM using stoichiometric gasoline. Crevice volume, which equals 2.5% of the clearance volume, has pressure equal to the pressure in the combustion chamber but remains at the cylinder wall temperature of 190°C. Conditions at the start of compres- sion are 65°C and 98 kPa. Assume complete combustion. Calculate: (a) Percent of gas mixture mass which is in the crevice volume at the start of combustion. (b) Percent of gas mixture mass which is in the crevice volume at the end of combustion.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In an isochoric and isobaric combustion cycle, the indicated mean pressure is 10 bars and the maximum pressure is 60 bars. The pressure and temperature at the start of the cycle are 1 bar and 17 oC. The volumetric compression ratio is 16/1. The mass constant of gas, R = 287 J / kg K The specific heat at constant volume, cv = 718 J / kg K. Calculate the maximum temperature of the combustion cycle for a thermal efficiency of 60%.
20. An SI engine operates on an air-standard four-stroke Otto cycle with turbocharging. Air-fuel enters the cylinders at 70°C and heat in by combustion equals Qin = 280 kJ/kg. Compression ratio rk = 8. Compute the theoretical exhaust temperature of the engine. a. 239.8634°C b. 239.8633°C c. 239.8635°C d. 239.8637°C
): Consider a spark-ignition engine in which the effective volume ratio (V1/V2) is 8:1. Compare the P-V diagrams and the work done at the end of the compression process for an isentropic compression y-1.4 with that for a polytropic compression with a-1.3. The initial pressure in the cylinder is 100 kPa. Assume air as working fluid and consider as a perfect gas.
A 2-stroke engine that works based on the diesel cycle admits air conditioning 100kPa and 280K. The compression ratio is 20:1 and the fuel-air ratio is 7.5x10^-3 kg fuel/kg air. If the calorific value of the fuel is 42750 KJ/kg, the displacement volume is 0.8L (with a diameter equal to 1.1 the stroke of the piston) The engine is 6-cylinder and rotates at 3600 rpm, use air tables and tables of combustion products with 200% excess air to determine: a) The cycle in a pressure-volume diagram with its corresponding numbering. b) The maximum temperature of the cycle, in K c) The cutoff ratio d) The temperature of the combustion gases at the engine outlet, in K e) The cooling water mass flow, in kg/s f) The motor power, in kW g) The mean effective pressure, in kPa h) Thermal efficiency, in %
In an ideal reduction method, havaotto 100 kPa, and 27 °C 1000 kJ/kg heat is applied to the combustion flow. Given the temperature of the specific heats, when the net power increases at the compression ratio, which approaches 7? (c: 1.0035 kJ/kgK; cy: 0.7165 kJ/kgK; R: 0.287 kJ/kgK; k: 1.4)
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 90 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 2050 K. Step 1 Your answer is incorrect. Determine the compression ratio. r = i 22.02
Calculate the efficiency of an Diesel cycle assuming Cold Air-Standard Analysis operating in air (k= 1.4) with a compression ratio of 20 and a cutoff ratio of 1.7? (Enter your answer as a percent to the nearest 1/10th)
(can expect help me on questions 5-10 of my this practice problem statement ?)The container truck engine operated on the diesel cycle with a compression ratio of 12. Assume the mass of air in the engine is conserved. At the start of the compression process, the air is at 1 atm and 30 oC. 400 kJ/kg of heat is removed from the air during the constant-volume heat rejection process. The ratio of . Through the diesel cycle, 20% of the work done by the air is used to operate the vehicle's refrigeration and heat pump system. One diesel cycle took 0.7s to complete. The heat rejection from the refrigeration and heat pump system is 800 kJ. The refrigeration system uses R-134a as the working fluid and operates between 100 kPa and 1200 kPa pressure limits. cp = 1.005 kJ/kg/K, cv = 0.7177 kJ/kg/K, R = 8.314J/mol/K, Molecular mass of air= 29g/mol. 1) Calculate the temperature at the start of the heat rejection process. 2) Calculate the temperature at the end of the heat addition process. 3)…
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 80 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 1950 K. Step 1 Determine the compression ratio. r = i Save for Later Attempts: 0 of 3 used Submit Answer Step 2 The parts of this question must be completed in order. This part will be available when you complete the part above. Ston 3
5. In an ideal Otto Cycle, the pressure at the beginning of the compression process is 15 psia, the temperature is 70F and the volume is 13.08 cubic feet. The maximum temperature of thre cycle is 2804F, and the heat supplied is 372 BTU. Using constant specific heat, calculate: a. The temperature at the beginning of the combustion, Rankine b. The compression ratio c. The temperature at the end of the expansion process in Rankine d. The net work of the cycle in BTU e. The thermal efficiency of the cycle in percent
(a) Derive an expression for the air standard efficiency of a Brayton cycle in terms of pressure ratio. (b) An engine working on Diesel cycle has a compression ratio of 15 and fuel supply is cut off at 8% of stroke. If the engine has a relative efficiency of 50%, determine the fuel consumption per kW-hr. Assume the fuel has a calorific value of 42000 kJ/kg.
A constant pressure fuel-air cycle of a compression ratio of (18). The ambient conditions are (1.0 bar) and (27 °C). The engine is running on C,H₁, which burned with 120% theoretical of air, the residual gas fraction is (4%). If the pressure at the end of expansion stroke is 4.5 bar and the exhaust temperature is (1200 K), calculate the cut-off ratio and thermal efficiency of the cycle if the lower calorific value is (42000 kJ/kg). Assume Cpp for products is (1.135 kJ/kg.K) and (M₁ = 30), for reactants MR will be calculated from chemical equation. P₂ P4 P₁ Qin Suction V₂ 3 V3 Exhaust Isentropic V₁ Qout