1. The operations of the industrial management plant where you work asks you to determine the length of a 2.0 cm diameter pipe that will be used to heat water from an inlet temperature of 20.0°C to an outlet temperature of 60.0 °C The operational flow of water in the pipe is to be 0.6 m/s, and the surface temperature of the wall is to be kept constant at 90.0°C by condensing steam. For the development of this task, you must obtain the properties of water at the average temperature of the fluid. To determine the forced convection heat transfer coefficient use the correlation: Nu = 0.023Re0.8p₂.0.4

1. The operations of the industrial management plant where you work asks you to determine the length of a 2.0 cm diameter pipe that will be used to heat water from an inlet temperature of 20.0°C to an outlet temperature of 60.0 °C The operational flow of water in the pipe is to be 0.6 m/s, and the surface temperature of the wall is to be kept constant at 90.0°C by condensing steam. For the development of this task, you must obtain the properties of water at the average temperature of the fluid. To determine the forced convection heat transfer coefficient use the correlation: Nu = 0.023Re0.8p₂.0.4

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

(4) Oil with an average temperature of 80°C at an average flow velocity of 0,5 m/s, is flowing by pipeline with an inner diameter of 35 mm and a length of 15 m. Determine the heat transfer coefficient of the oil to the pipe wall, assuming that the average temperature of the pipe wall is 60°C. Oil properties are known, at 80°C: p=840 kg/m³, "c,=1,926 kJ/(kg-K), n=0,233 Pa-s, 2=0,179 W/(m-K).
2. For a saturated dry steam at 1,500 KPa that passes through a 100 mm (OD) steel pipe with a thickness of 5 mm and a length of 100 meters. The steam line is insulated with a 50 mm thickness and a thermal conductivity of 0.25 W/m.C. For a mass flow rate of 600 kg of steam per hour. The surface film conductance of steam is h = 5,500 W/m?.C, surface film conductance of air is h = 12 W/m?.C , thermal conductivity of pipe material is k = 153 W/m.C and the ambient air temperature is -10°C . Determine the following: a) The quality of steam after passing through the pipe b) Explain the concepts/principles that were considered and the factors that affected the condition of the above mentioned items (a & b) @ 1,500 KPa (tsat = 198.32°C) kJ 2,792.20- kg k] 844.89 kg kJ 1,947.30- kg 1 hg 2 hf hfg
A steam is flowing through a 5.7 m long of steel tube that has inner and outer radii of r, = 0.015 and r, 0,024 m, and a thermal conductivity of 0.14 W/m.K. The steam and the outer surface of the tube is maintained at constant temperature of 150 °C and the air = 25 °C, h = 0.35 W/m2.k) is surrounding the tube. To prevent the outer surface of the steel from the environmental conditions, a material that has a thermal conductivity of 0.014 W/m.k is wrapped over the outer surface of the steel. What is the maximum heat transfer from the steam to the air (W)? NOTE: Enter your answer. Answer Air Th Steam Steel Tr 111 To
Q1 a) What is the physical significance of Reynolds number? Write down 5 (five) factors that influence the convection heat transfer rates. b) Water is to be heated from 10°C to 80°C as it flows through a 2-cm-internal-diameter, 7-m- long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady operation all the heat from the heater is transferred to the water in the tube. If the system is to provide hot water at a rate of 8 L/min, determine the convection heat transfer coefficient and temperature at the inner surface of the pipe at the exit. Q2 a) Consider heat transfer to oil flow inside a copper pipe. Is the pipe length affecting the heat transfer rate into the oil? Briefly explain. b) Used engine oil can be recycled by a patented reprocessing system. Suppose that such a system includes a process during which engine oil flows through a…
Heat transfer is of critical importance in various industrial applications, including manufacturing. During machining, both the cutting tool and the workpiece will be significantly heated by friction heating. The heating of the cutting tool will reduce the tool hardness and strength, deteriorate the cutting quality, and shorten the tool life. Therefore, it is essential to prevent the overheating of the cutting tool during machining. Coolants are an instrumental part of machining to help cool the tool and the workpiece, provide lubricant, flush away chips, and prevent corrosion. The task of this project is to design the coolant to maintain the maximum machine tool temperature below 100 °C during the side milling process. As shown in the figure below, the machine tool has a diameter of 10 mm (D) and a length of 5 cm. The tool material is M2 high speed tool steel (T11302) and the workpiece is aluminum 6061. The spindle speed (w) is 2000 RPM and the cutting speed (v) is 50 mm/min. The feed…
Most automobiles have a coolant reservoir to catch radiator fluid that may overflow when the engine is hot. Such a radiator, made of copper, is filled to its 12-L capacity when at 10.0°C. -What volume of radiator fluid, in liters, will overflow when the radiator and fluid reach their 99.5°C operating temperature, given that the fluid’s thermal coefficient of volume expansion is 400.0 × 10-6 / °C? The coefficient of volume expansion for copper is 5.1 × 10-5 /°C.
SHow you complete solution.
4
Heat Transfer Question is image part i) ?
Water (5.2 L'min) is flowing in a tube "D-3 cm, L- 5 m" and is to be heated from 15 C to 59.9°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. What is the power rating of the resistance heater (kW)? If turbulent flow use Dituss-Boetler relation Nu- 0.023 Re Pr. ed 2.00 08 on Properties : p= 992.1 kg/m , C,-4179 J/kg. C, k= 0.631 W/wm°C, Pr = 4.32, v = 0.658E-6 Select one: O A 20.55 O B. 17.63 O.19.17 O D. 14.58 O E. 16.13
A 10 cm thick and 1 m wide long steel plate is immersed in an oil bath at T0=40°C when the temperature is T1=240 ° C. Heat transfer coefficient between plate and oil is h=600 W/m2K and p=7833 kg/m3 for steel, cp=465 J/kgK, k=43 W/mK, (alpha) = 1.2x10^(-5) m2/s. A) After how long the core temperature of the steel plate becomes 100 ° C. B) What is the temperature inside 3 cm from the surface of the steel plate happens. C) Within this period, per unit length plate what is the amount of heat that passes.
Please help me with this question. This is for review purposes. Thank you!