Quiz #2 Key 2024

Industry Print Exercise 23-2 Refer to print PR 23-2. The sequence of operations for this print is given below. Answer the questions following the sequence of operations. Sequence of Operations descends at a controlled rate, slowly compacting the explosive charge to avoid detonation due to a sudden Description: This is a system to control a 90-ton hydraulic, explosive-compaction press. The press ram shock. 1. The cycle is started by energizing solenoid A, which shifts control valve 3 and supplies pressure to the head end of the hydraulic cylinder (7). This operates the ram. 2. The cylinder (7) extends at a slow rate controlled by the fluid in the rod end of the cylinder, which is vented through the flow control valve (5). the 1. When de-energizes solenoid A and energizes solenoid B. This shifts control valve 3 to retract the cylinder (7). de rol valve 5 has an integral check valve that permits the free flow of fluid in the opposite direction, causing the cylinder (7) to rapidly retra…

19 Rigidity depends on what 3 factors? Gravity, radius of Gyration and direction of spin. Mass of the rotor, radius of gyration, & speed of spin. Wander, drift and speed of spin. Mass of the rotor, distance to spin axis, & direction of spin. 20. The pilot of this aircraft pulls the control column back to start a climb. She makes no change to the engine power. The aircraft loses speed as it converts potential energy into kinetic energy. The total amount of energy in the aircraft reduces. The aircraft's speed remains the same because the engine power is unchanged. The aircraft loses speed as it converts kinetic energy into gravitational potential energy

Answer asap

Remaining Time: 1 hour, 29 minutes, 23 seconds. v Question Completion Status: A Moving to the next question prevents changes to this answer. Question 5 Anti-friction bearings require more space than plain bearings. True False A Moving to the next question prevents changes to this answer.

Do and Answer the ff.

Words: Cage, Centre, Changes, Drive, Flange, Inner, Joint, Race, PropellerA Löbro constant-velocity __________________, has an outer race, an inner race and a __________________ with steel balls.The outer race is bolted to the __________________ of the front propeller shaft, and the inner race is splined to the front endof the rear __________________ shaft. The joint is enclosed by a dust shield and boot. The front shaft is supported by a__________________ bearing.This type of joint is designed to allow __________________ in propeller shaft angle and also changes in propeller shaft length.Both the __________________ race and the outer race have angular grooves for the balls. The balls transfer__________________ from one race to the other but, at the same time, the inner __________________ is able to move in orout in the grooves or change its angle.

Need questions 13, 14, 15 explained and answered please.

Hello, Can someone help me with this worksheet please?

At the instant the hand has stopped pushing, the tangential acceleration of the ruler is Group of answer choices

solution incorrect resolve again

Need questions 4, 5, 6 explained and answered please!

I need parts 7, 8, and 9, answered pertaining to the print and instructions.