11.10.1-packet-tracer---design-and-implement-a-vlsm-addressing-scheme

Packet Tracer - Design and Implement a VLSM Addressing Scheme Addressing Table Device Interface IP Address Subnet Mask Default Gateway East G0/0 10.1.1.97 bla 255.255.255.240 nk N/A G0/1 10.1.1.65 bla 255.255.255.224 nk N/A S0/0/0 10.1.1.121 bla 255.255.255.252 nk N/A West G0/0 10.1.1.113 bla 255.255.255.248 nk N/A G0/1 10.1.1.1 bla 255.255.255.192 nk N/A S0/0/0 10.1.1.122 bla 255.255.255.252 nk N/A ES-1 blank VLAN 1 10.1.1.98 bla 255.255.255.240 nk 10.1.1.97 ES-2 blank VLAN 1 10.1.1.66 bla 255.255.255.224 nk 10.1.1.65 WS-1 blank VLAN 1 10.1.1.114 bla 255.255.255.248 nk 10.1.1.113 WS-2 lank VLAN 1 10.1.1.2 bla 255.255.255.192 nk 10.1.1.1 E1-22 lan1k NIC 10.1.1.110 bla 255.255.255.240 nk 10.1.1.97 E2-47 an1k NIC 10.1.1.94 bla 255.255.255.224 nk 10.1.1.65 W1-201 NIC 10.1.1.118 bla 255.255.255.248 nk 10.1.1.113 W2-87 NIC 10.1.1.62 bla 255.255.255.192 nk 10.1.1.1 Objectives In this lab you will design a VLSM addressing scheme given a network address and host requirements. You will configure addressing on routers, switches, and network hosts. • Design a VLSM IP addressing scheme given requirements. • Configure addressing on network devices and hosts. • Verify IP connectivity. • Troubleshoot connectivity issues as required. Background / Scenario You have been asked to design, implement, and test an addressing scheme for a customer. The customer has given you the network address that is suitable for the network, the topology, and the host requirements. You will implement and test your design. Instructions You have been given the network address by your customer. The host address requirements are: © 2019 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 3 www.netacad.com

Packet Tracer - Design and Implement a VLSM Addressing Scheme Requirements Host Requirements: LAN Number of Addresses Required blank ES-1 blank 11 ES-2 blank 28 WS-1 blank 5 WS-2 blank 47 Design Requirements • Create the addressing design. Follow guidelines provided in the curriculum regarding the order of the subnets. • The subnets should be contiguous. There should be no unused address space between subnets. • Provide the most efficient subnet possible for the point-to-point link between the routers. • Document your design in a table such as the one below. Subnet Description Number of Hosts Needed Network Address/CIDR First Usable Host Address Broadcast Address blank WS-2 blank 47 10.1.1.0 10.1.1.1 b 10.1.1.63 blank ES-2 blank 28 10.1.1.64 10.1.1.65 b 10.1.1.95 blank ES-1 blank 11 10.1.1.96 10.1.1.97 b 10.1.1.111 blank WS-1 blank 5 10.1.1.112 10.1.1.113 b 10.1.1.119 Bl Router Link blank 2 10.1.1.120 10.1.1.121 b 10.1.1.122 Configuration Requirements Note : You will configure addressing on all devices and hosts in the network. • Assign the first usable IP addresses in the appropriate subnets to [[R1Name]] for the two LAN links and the WAN link. • Assign the first usable IP addresses in the appropriate subnets to [[R2Name]] for the two LANs links. Assign the last usable IP address for the WAN link. • Assign the second usable IP addresses in the appropriate subnets to the switches. • The switch management interface should be reachable from hosts on all of the LANs. • Assign the last usable IP addresses in the appropriate subnets to the hosts. If the addressing design and implementation are correct, all hosts and devices should be reachable over the network. © 2019 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 3 www.netacad.com

Packet Tracer - Design and Implement a VLSM Addressing Scheme © 2019 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 3 www.netacad.com